Aaron SPORT ONE User manual

OPERATIONS MANUAL FOR SPORT ONE PUMP

Presta
(Sclaverand / French valve)
PRESTA AND DUNLOP VALVE:
Place the pump head with the grey
side marked„P“ on top of the valve.
Twist the lever toward„P“.
Note: Unscrew the small knurled
nut on the Presta valve before
placing it on the pump head.
SCHRADER VALVE:
Place the pump head with the
black side marked„S“ on top of the
valve. Twist the lever toward„S“.
Note: Insert the valve very far into
the pump head to open the fan
pin.
1 Suitable for the following valves
2 Functionality
3Included equipment
5 Reviews
Manual
4 Usage of tire patches
A First pump the defective tube with your oor pump and tighten
the valve so that the air cannot escape.
B Then put the tube bit by bit into a bucket of water. You can see air
bubble rising at the place where the hole is located.
C Now you have to roughen the tube with sandpaper around the
hole.
D Remove the protection lm of the patches and press the patch
for at least 20 sec on the dry, clean and dust-free hole.
Sandpaper Tire patches Ball needle Adapter
Dunlop
(Woods valve)
Schrader
(Auto / Car valve)
Any problems mounting the
pedals? If so please feel free to
contact our support.
Please don‘t forget to give us your
feedback / review.

newsletter
Newsletter
– Voucher campaigns
– Information about new AARON
products
– Further AARON News
You can subscribe to our
newsletter here.
Urban pedals, City / Trekking
bike
City pedals, City / Trekking
bike
Rock pedals, Mountain bike Sport One oor pump
MORE PRODUCTS

MM Commerce GmbH
Schlossermauer 30
86150 Augsburg
Germany
www.aaron-parts.com
[e-mail]