Ab Solo CT3000 User manual

AB SOLO
12
MONITOR INSTRUCTION
FUNCTION MARK:
1. SCAN 2. TIME 3.COUNT 4. RPM 5. CAL
SUMMARY: This monitor is equipped with an auto on /auto off function. The computer will come
on automatically if the exercise machine is in motion. If stop exercising for over 6 minutes, the
computer will turn itself off.
FUNCTIONS AND OPERATIONS:
zRESET
Pres the button more than 3 seconds will reset all functional values to zero.
zSCAN:
Press the button until SCAN, monitor will automatically cycle between RPM ,TIME, COUNT ,
CAL every 6 seconds.
zTIME:(unit=Minute: Second)
Press the button until TIME, appears to count up the elapsed time.
zCOUNT:
Press the button until COUNT, appears to display the total repetitions.
zRPM:
Press the button until RPM , appears to display the step per minute.
zCALORIE:(unit=Calorie)
Press the button until CAL, appears to accumulate the calorie consumption.
SPECIFICATION:
FUNCTION
Auto Scan
Every 6 seconds
Rpm
0-999
Time
0:00-99:59 Second
Count
1-9999
Calorie
0.1-999.9 Kcal
Controller
4 bit, 1 chip microprocessor
Sensor
No-contact magnetic type
Battery type
2 PCS of SIZE-AA or UM-3
Operating temperature
0Ԩ- +40Ԩ( 32Ԭ- 104Ԭ)
Storage temperature
-20Ԩ- +50Ԩ( -4Ԭ- 122Ԭ)