abco SUPERFOG PRO 360 User manual

Sydney
3B 34 Yarrunga St, Prestons NSW 2170
Perth
44 John Street, Bentley WA 6102
Melbourne
42 Logistics Street, Keilor Park VIC 3042
Queensland
33 Canberra Street, Hemmant QLD 4174
1800 177 399
www.abcopro.com.au
[e-mail]
SUREFOG PRO 360 ULV FOGGER PACKAGE
• 240 volt machine complete and ready
to go for all sanitising procedures
• 15m hose for maximum flexibility
• Convenient spray lance to ensure reach into
those otherwise hard to-get-at areas
• Ergonomically designed gun to minimise hand
and wrist fatigue
• Specific sanitation spray tip to ensure
correct atomization
190723
REORDER CODE
USER MANUAL

23
Surefog Pro 360 ULV Fogger
CAUTION
This manual contains important warnings and information
PLEASE READ & KEEP FOR FUTURE REFERENCE
VERSION S3-01-0420
Abco Products Pty Ltd
Declares that the
Surefog Pro 360 ULV Fogger
is in compliance with the regulations included in:
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive
The standards applied by the manufacturer are:
EN55014-1:2006+A1; A1:2009+A2:2011
EN55014-1:2017
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013

4
         
Most sprayable disinfectants
and other sanitising uids
          
Flow 1.9 ltr/min
MWP 1100 psi (regulated)
         
Motor 700 watt
Weight 14.85 kg (complete)
Warranty 2 years
                 
Sanitising spray gun
Sanitising spray lance
Gold sanitising atomisation tip
1/4” x 15m textile braided
hose assembly
          
110 volt S3 -110
240 volt S3 -240
5
On/o switch
Suction tube
Pre -set
pressure control
knob
Sanitising
spray lance
Gold
sanitising
atomisation
tip
15m hose
assembly
Sanitising
spray gun

67
                              
                                  
GENERAL SAFETY
WARNING! Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, re and / or serious personal injury. The term Surefog Pro
360 ULV Fogger in all of the warnings listed below refers to your mains-operated (corded) sprayer.
WORK AREA
+ Keep your work area clean and well lit.
+ Do not operate your Surefog Pro 360 in explosive atmospheres, such as in the
presence of ammable liquid, gases, or dust.
+ Keep bystanders, children, and visitors away while operating your Surefog Pro 360.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
+ Fogger plugs must match the outlet. Never modify the plug in any way.
+ Do not expose your Surefog Pro 360 to rain or wet conditions.
+ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the fogger. Keep the cord away from heat, oil, sharp edges or moving parts.
Replace a damaged cord immediately.
Damaged or entangled cords increase the risk of electric shock.
+ When operating a Surefog Pro 360 outdoors, use an outdoor extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
+ Stay alert, watch what you are doing and use common sense when operating your Surefog Pro
360 ULV Fogger. Do not use while you are tired or under the inuence of drugs, alcohol, or
medication. A moment of inattention could result in personal injury.
+ Always wear the appropriate PPE as required by the facility being sanitised.
+ Avoid accidental starting. Ensure the switch is in the o position before plugging in.
+ Do not overreach. Keep a proper footing and balance at all times.
HOSES
+ Tighten all of the uid connections securely before each use.
+ Only use hoses with a spring guard. The spring guard helps protect the hose from
kinks or other damage which could result in hose rupture and cause an injection injury.
Do not allow kinking or crushing of hoses or allow it to vibrate against rough, sharp or
hot surfaces.
+ NEVER use a damaged hose, which can result in hose failure.
Before each use, check entire hose for cuts, leaks, abrasions, bulging of the cover,
or damage or movement of couplings. If any of these conditions exist, replace the
hose immediately.
+ NEVER use tape or any device to try to mend the hose.

89
* Included in Packing Kit 12 - 002

10
ITEM PRODUCT CODE DESCRIPTION QTY
1 12-190 -001 SOCKET CAP SCREW M5 x 50 3
2 12- 190 - 002 SOCKET CAP SCREW M5 x 25 1
3 12-190 -003 SOCKET CAP SCREW M5 x 6 2
4 12-190 -004 CRANK HOUSING 1
5 12- 190 - 005 SCREW M4 x 8 4
6 12-190 -006 COVER PLATE 30 x 45 x 1.5 1
7 12-190 -007 SCREW M3 x 16 2
8 12- 190 - 008 PRESSURE SWITCH 1
PCA KIT 12-190 -009 PRESSURE CONTROL ASSEMBLY 9 - 17 & 82 1
9 INC. IN PCA KIT SCREW M5 x 15 1
10 INC. IN PCA KIT PRESSURE ADJUSTOR KNOB 1
11 INC. IN PCA KIT PRESSURE ADJUSTOR SCREW 1
12 INC. IN PCA KIT SLEEVE 1
13 INC. IN PCA KIT SOCKET SET SCREW M4 x 4 2
14 INC. IN PCA KIT ADJUSTOR SLEEVE 1
15 INC. IN PCA KIT INTERNAL CIRCLIP IS -17 1
16 INC. IN PCA KIT SPRING TH14 -040 1
17 INC. IN PCA KIT PRESSURE PISTON 1
18 12-190 -010 BALL BEARING 6200 - ZZ 1
19 12- 190 - 011 INTERNAL CIRCLIP IR - 28 2
20 12-190 -012 CONNECTING ROD 1
21 12-190 -013 NEEDLE BEARING TLA2212 1
22 12-190 -014 CRANK SPINDLE 4.5mm 1
23 12-190 -015 PARALLEL KEY 5 x 5 x 10 1
24 12-190 -016 CRANK GEAR M1.0 x 86T 1
25 12-190 -017 BALL BEARING 6000 - ZZ 1
26A 12-190 -018 MOTOR UNIT 110V 1
26B 12-190 -019 MOTOR UNIT 220V 1
27 12-190 -020 CARBON BRUSH 7 x 11 2
28 12-190 -021 BRUSH CAP 2
29 12-190 -022 FUSE PLATE 1
30A 12- 190 - 023 FUSE 110V 1
30B 12-190 -024 FUSE 220V 1
31 12-017 SCREW M4 x 12 4
32 12-190 -025 SWITCH PLATE 1
33 12-190 -026 POWER SWITCH 1
34 12-190 -027 MOTOR HOUSING -RIGHT 1
35 12-190 -028 CABLE GLAND SB8R -3 1
36A 12-190 -029 ELECTRONICS BOX 110v 1
36B 12-190 -030 ELECTRONICS BOX 220v 1
37 12-190 -031 SCREW M4 x 14 4
38 12-190 -032 MOTOR HOUSING -LEFT 1
39 12-190 -033 SCREW M4 x 35 6
40 12-190 - 034 SCREW M4 x 30 2
11
ITEM PRODUCT CODE DESCRIPTION QTY
41 12-190 -035 SCREW M5 x 25 2
42 12-190 -036 SOCKET CAP SCREW M5 x 25 4
43 12-190 -050 GUIDE CYLINDER Ø26 x Ø32 x 30 1
44 12-190 -051 RETAINING RING IR -32 1
45 12-190 -052 DRIVE PISTON 1
46 12- 190 - 053 WRIST PIN -ROD Ø10 x 23.5 1
47 12- 018 PACKING NUT 1
48 12- 019 SEAL SEAT 1
49 12- 012* O -RING S -31.5 1
50 12- 013* O -RING Ø31.2 x Ø35.1 x 1.8 1
51 12- 002 COMPLETE PACKING KIT 1
52 12- 009 DISC SPRING 3
53 12-190 -054 DISPLACEMENT PISTON 1
54 12- 012 CHECK BALL Ø6.35 1
55 12- 010 BALL SEAT - SMALL Ø4 x Ø13.8 x 4 1
56 12- 011* O -RING 1
57 12- 015 BALL SEAT FASTENER M16 x P1.0 1
58 12- 008 PACKING SPACER 1
59 12-190 -055 PUMP HOUSING 1
60 12-190 -056 PRESSURE ACTUATOR 1
61 12-190 -095 SPACER Ø10 x Ø15 x 2 1
62 12- 003 OUTPUT NIPPLE PT 1/4" x 1/4" -19PF 1
63 12-190 -057 SOCKET PRESSURE PLUG PT 1/4" 1
64 12- 190 - 058 PRIMING VALVE 1
65 12-190 -059 DRAIN TUBE PT1/8" x 0.92M 1
66 12-190 -060 FLAT WASHER 1/4" x Ø10 x 1 4
67 12- 190 -061 SOCKET CAP SCREW M6 x 110 4
68 12- 190 -062 SPACER Ø25.5 x Ø38 x 7 1
69 12-190 -063 INNER SPACER Ø22 x Ø32 x 9 1
70 12- 007 BALL GUIDE 1
71 12- 006 CHECK BALL Ø12.7 1
72 12-190 -064 BALL SEAT Ø9 x Ø20 x 5 1
73 12-190 -065 GLAND NUT 1
74 12-190 -066 HOSE CLIP 1
75 12-190 - 067 O -RING Ø2.4 x Ø19.8 x Ø24.6 2
76 12- 190 - 068 SUCTION HOSE 1
77 QF0535015B INLET STRAINER 20 MESH 1
78 12-190 -090 SOCKET CAP SCREW M8 x 35 4
79 12- 190 - 091 FRAME 1
80 12- 190 - 092 FRAME LEFT 1
81 12-190 -093 POWER SUPPLY CORD 1
85 12- 190 -094 TUBE HOLDER Ø11 x Ø22 5
86 12- 001 PACKING NUT TOMMY BAR 1
88 61475EETD HIGH PRESSURE HOSE 1/4” x 7.5M 3300 PSI 1