PL Systems PlusZap PZ16 User manual

Mounting Options
Wall
Desk
Suspended
Please read these instructions carefully and store in a safe
place for future reference.
PLUSZAP™
As part of the P+L brand of insect control products, PlusZap™is
an effective and flexible commercial flykiller. Available in a
white or stainless steel finish, two sizes of unit are available
which can be wall mounted, ceiling suspended or desk
mounted.
Contents of package
- 1 x PlusZap™flykiller
- 2 x Screws, wall plugs and suspension keyrings
- 1 x Mains cable
- 1 x Suspension chain
- 2 x UV tubes
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
PlusZap™utilises ultra violet tubes to attract flying insects and
zaps them on a killing grid, before collecting them in a deep
removable catch tray.
WARNING
PLUSZAP™MUST ONLY BE USED IN AREAS WHICH ARE FREE OF
DUST AND ANY POSSIBLE EXPLOSIVE VAPOUR MIXTURE.
SHOULD YOU HAVE ANY QUERIES CONTACT YOUR LOCAL FIRE
AUTHORITY FOR ADVICE BEFORE INSTALLATION.
PLUSZAP™IS SUITABLE FOR INDOOR USE ONLY AND IS NOT
SUITABLE FOR USE IN BARNS, STABLES AND SIMILAR
LOCATIONS.
POSITIONING
PlusZap™should ideally be fixed around two meters above
the ground, preferably in the darkest place within the area to
be protected and is supplied with a two meter mains lead.
Do not position the unit close to windows, skylights or other
sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally, PlusZap™units should be
visible from every part of the area to be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
PlusZap™should be mounted as shown in the mounting
options section of this document. Use the removable mains
lead and plug to connect the PlusZap™to a power supply of
appropriate rating, as specified on the specification label
found on the catch tray.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING PLUSZAP™
PlusZap™should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects
are most attracted to PlusZap™units at night when there is no
competition from daylight or other light sources.
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING
It is recommended that cleaning is carried out regularly every
month. During cleaning the unit should be thoroughly wiped
down with a damp cloth, removing any build up of dirt.
Ensure the unit is completely dry before reconnecting it to the
power supply.
GUARANTEE
PlusZap™has a two year guarantee and if maintained as
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee.
*Excludes tubes and starters. Does not cover breakdown due to misuse, incorrect operation
or use in an incorrect application.
MOUNTING FIXING CENTRES
METHOD PZ16 PZ30
Wall 288mm 438mm
Desk - -
Suspended 356mm 506mm
PZ16 & 30
Commercial Zapper Insect Control

SPECIFICATION / REPLACEMENT PARTS
Unit PZ16
Voltage 230V ~ 50Hz
Dimensions(mm) 360 x 140 x 260
Coverage 40 Sq. Meters
Weight 4 Kg
Light Output 16W
Tubes 1 x I621
Starter 1 x I154
Unit PZ30
Voltage 230V ~ 50Hz
Dimensions(mm) 510 x 140 x 260
Coverage 80 Sq. Meters
Weight 6.5 Kg
Light Output 30W
Tubes 2 x I616
Starter 2 x I154
Commercial Zapper Insect Control
C2008
P+L Systems Ltd
Information provided on these instructions is modified and
updated from time to time. This is due to the constant
redevelopment of our products. As such, it is not intended that
you should rely on it or that it should form part of any contract.
P+L Systems Ltd
Ten St James Business Park
Grimbald Crag Court
Knaresborough
HG5 8QB UK
T [phone]
F [phone]
W www.pandlsystems.com
E [email protected]
R1 05/08
TUBE REPLACEMENT
BEFORE REPLACING THE TUBES, ALWAYS ENSURE THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
To ensure the efficiency of PlusZap™in catching flying insects, the UV tubes should
be replaced annually. After twelve months the phosphor coating that emits the
correct wavelength of UV light has burnt away and the UV output is diminished
substantially.
To replace the UV tubes…
1. Rotate the tube through 90°, freeing it from the tube holders.
2. Pull the tube away from the chassis.
3. Dispose of the used UV tube in conjunction with local WEEE regulations.
STARTER REPLACEMENT
BEFORE REPLACING THE STARTERS, ALWAYS ENSURE THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
The starters provide an extra spark to initially light the UV tube. Starters wear out and
should be replaced at the same intervals as the UV tubes.
To replace the starters…
1. Rotate the starter anti-clockwise.
2. Pull the starter free from the unit.
TRAY REMOVAL
The tray is connected to the power supply of the unit via a hidden switch. By
removing the tray, the connection is broken and power is cut to the unit. This
ensures safe access to the unit for servicing and cleaning.
When replacing the tray ensure it is pushed fully into position and that the
connection is made to power the unit.
Tube ReplacementStarter ReplacementTray Removal