Abexo EGO32 User manual

EGO
USER MANUAL
MADE IN ITALY
Universal 4 channels multifrequency transmitter
(433,92 MHz to 868,80 MHz)
For the latest instructions
visit our website at www.abtecno.com
rev. 05/2017

2EGO User manual
key 1
key 2
key 3
key 4
EGO
Model EGO
made in ITALY
SN: 1140
3V CR2032
32
Seed code (hidden button)
Press and hold key 3, then press and hold key 4. The red led will light steady. Release both keys and
press the key which source code is needed.
GENERAL INFORMATION
EGO32

EGO User manual 3
HOW TO GENERATE A ROLLING CODE
IF ORIGINAL TRANSMITTER IS LACKING
1) Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then
release.
2) Press the key on which you want to store the new code a number of times equal to Nvalue indi-
cated in the tables below. The led blinks 3 times for conrmation.
In order to generate another code on a dierent channel please repeat step 2 within 3 seconds
The programming of EGO transmitter on the receiver is mandatory. For the correct proce-
dure please refer to receiver manufacturer instructions.
DOUBLE CLICK MODE
Double click mode has the purpose to avoid unwanted activations of the transmitter and is switched
o by default.
When switched on requires to press the key twice and hold for at least 2 seconds for the transmitter
to work.
Swicth ON: press and hold key 4, then press key sequence 3, 2, 1. Green led will blink once.
Switch OFF: press twice and hold key 4 then press key sequence 3,2,1. Red led will blink once.
PRODUCER N PRODUCER N
BFT N1 SEAV 868MHz N15
NICE Smilo N2 ACM N16
APRIMATIC N3 GENIUS RC N17
BENINCÀ N4 GENIUS N18
DEA N5 CARDIN FM N19
GiBiDi N6 GENIUS BRAVO N20
FADINI N7 NORMSTAHL N21
FAAC RC-LC N8 PUJOL N22
SOMMER
Chiave-1 434MHz
N9 V2 433MHz N23
SOMMER
Chiave-2 434MHz
N10 V2 868MHz N24
SOMMER
Chiave-1 868MHz
N11 O&O 433MHz N25
SOMMER
Chiave-2 868MHz
N12 O&O 868MHz N26
MHOUSE N13 NOVOFERM N27
SEAV 433MHz N14
PRODUCER MODEL N
NICE
FLO2R, FLO4R, VERY VR, ERA-INTI2,
ERA-ONE2/4
N1
LIFTMASTER 433 N2
LIFTMASTER 315 N3
PRASTEL
TC4E, BFOR, MPSTL1E, MPSTL2E,
MPSTL4E, MPSTP2E, MPSTP2
N4
KINGATES STILO-4, CLIPPER N5
DITEC GOL4, BXLG4, BXLP2, BXLS2 N6
TELCOMA FM N7
ERONE 433 N8
ERONE 868 N9
SILVELOX N12
DOORHAN N13
EGO
EGO32

4EGO User manual
ROLLING CODE TRANSMITTERS COMPATIBILITY TABLES
PRODUCER MODEL PHOTO
ACM TX2 COLOR
ADYX/GENIUS TE4433H BLUE, BRAV0 TE
4433H, ECHO TX4
ALLMATIC
BRO4WN, BRO4W RED,
BROOVER, BROSTAR, MINI
PASS, TECH3
APRIMATIC TM4, TR2, TR4, TX2, TX4M
BENINCA
APPLE4WV, CUPIDO2,
CUPIDO4, IO, T2, T4WV,
TO-GO2, TO-GO 4WV
DEA MIO TR2, MIO TR4, GENIE-R
W
FAAC 433 XT4 433 RC
FADINI JUBY SMALL, JUBY433
GENIUS/CASALI 252, 252 NEW, 254, 254
NEW
GiBiDi AU1600, AU1610, AU1680,
AU1810, DOMINO
MHOUSE GTX4, MT4, TX3, TX4
MOOVO MT4, MT4G, MT4V
NICE SMILO
NORMSTAHL/
CRAWFORD
433-2K, 433-4K, EA433 2K,
EA433 4K, EA433 2KM,
T4334
PUJOL VARIO BLACK, VARIO3
OCEAN, VARIO P2153
SEAV
BE GOOD RH1, BE HAPPY
RH1, RH2, RH3, RS1, RS2,
RS3
V2 PHOENIX, PHOX, TRC4,
HANDY
FAAC
DL2 868 SLH, DL4 868 SLH,
T2, T4, TML2 SLH, TML4
SLH, XT2 SLH, XT4 SLH
GENIUS AMIGO JA 332, AMIGO JA
334, KILO TX2, KILO TX4
BFT
KLEIO TX2, KLEIO TX4,
MITTO 2, MITTO 4, RB,
RCB2, RCB4, TRC2, TRC4,
TX2, TX4
CARDIN S449QZ, S437TX
SOMMER/
APERTO FM
4013, 4013TX, 4014, 4020,
4022TX, 4025, 4026
LIFTMASTER
433
94335E, 84335EML,
94335E-OLD
LIFTMASTER
315/390
371LM, 370LM, 372LM
373LM, 374LM, 312HM/C,
412HM/C
SILVELOX ECO-TSM2, 3400155
DOORHAN T4
ERONE 433/868
SERIE 07, FLAT, MINI,
STANDARD
TELCOMA FM FM402, FM402E, FM404E
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
PRASTEL
TC4E, BFOR, MPSTL1E, MPSTL2E
MPSTL4E, MPSTP2E, MPSTP2
DITEC GOL4, BXLG4, BXLP2, BXLS2
NICE
FLO2R, FLO4R, VERY VR,
ERA-INTI2, ERA-ONE2/4
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
PRODUCER MODEL PHOTO
ROLLING CODE GROUP 1
EGO
ROLLING CODE GROUP 1
ROLLING CODE GROUP 2 (BFT)
ROLLING CODE GROUP 3
ROLLING CODE GROUP 2 (FAAC E GENIUS)
ROLLING CODE GROUP 3
EGO
EGO
EGO
EGO32
EGO32
Photos are the copyrighted property of their respective owners.
ROLLING CODE GROUP PRASTEL
EGO32
ROLLING CODE GROUP DITEC
EGO32
ROLLING CODE GROUP NICE
EGO32

EGO User manual 5
FIXED CODE TRANSMITTERS COMPATIBILITY TABLES (EGO / EGO32)
M ARCA/BRAND FREQ U EN ZA M O D ELLO FO TO
ADYX 433.920 ALIZE EM 2C, ALIZE EM 4C
A ETER N A 433.920 TX433 1,2,4 buttons
A LLM ATIC 306.000 ASM X2, A SM X4
A LLM ATIC 433.920 AEM X1, A EM X2, A EM X4
A LLM ATIC 433.920 E U R O P E A U T O A R M Y 2 ,
ARM Y1, ARM Y4
A LLM ATIC 433.920 M X1, M X2, M X4
A LLISTER 318.000 9931-318, 9931T-318
A LLSTA R 288.000 111025 A llister Pulsar
Q u ic k c o d e
A LLSTA R 288.000
9921T-288, 9921M T,
9921TK, 9922T-288,
9923T-288, 9931-288,
9931T-288, 9931M T,
9931TK, 9931TK6, 8831T-
288, 8832T-288, 8833T-
288,8821T-288, 8822T-
288, 8823T-288, 8832TK
A LLSTA R 288.000 8833O CS-288
A LLSTA R 318.000
9921T-318, 9921M T,
9921TK, 9922T-318,
9923T-318, 9931-318,
9931T-318, 9931M T,
9931TK, 9931TK6, 8831T-
318, 8832T-318, 8833T-
318,8821T-318, 8822T-
318, 8823T-318, 8832TK
A LLSTA R 318.000 110995 A llister Pulsar
Q u ic k c o d e
A LLSTA R 318.000 8830O CS-318
A L L T R O N IC 433.920 S429_1, S429_2, S429_4,
S429_M
A L L T R O N IC 433.920 S425
ANSONIC 433.920 SA 434-1E, SA434-2E,
SA434-3E, SA434-4E
ANSONIC 433.920 SA 434-1M IN I, SA434-
2M IN I, SA 434-2M idi
ANSONIC 868.350 SA 868-1E, SA 868-2E,
SA868-3E, SA868-4E
ANSONIC 868.350
SA 868-1m ini/M , SA 868-
2 m in i/ M (d ip s w itc h
v e r s io n )
A PERTO 433.920 CPS1, CPS2, CPS4
A P R IM A T IC 305.000 TS1, TS2
A U TELC O 286-306 TX300T
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
A V ID S E N 433.920 100601 m icrom ark
M M 23164
A V ID S E N 433.920 104505
A V ID S E N 433.920 100951, 100955, 100550,
100400
B&D
BnD
BD
433.920 062170/4333EBD , 062171,
4333°
B&D
BnD
BD
433.920 '062162
B&D
BnD
BD
433.920 PTX4 059120 / 059116
B&D 433.920 062170/4333EBD 1A4982
10 trinary
BANDY 433.920
BELFO X 433.920
D H S433-1, D H S433-2,
D H S433-4, dip sw itch
v e r s io n
BELFO X 433.920 D H S 433,92 (7733), dip
s w itc h v e r s io n
BELFO X 868.350 D H S 868,3, dipsw itch
v e r s io n
BELFO X 868.350 H S 868-20
BENINCA' 306.000 LO T1A , LO T2A , LO T4A
BENINCA' 306.000 LO TX 1A , LO TX 2A , LO T X 4A
BENINCA' 306.000 L O .T X 2 P S
BENINCA' 433.920 LO T1W , LO T2W , LO T4W
BENINCA' 433.920 LO T2W M S
BENINCA' 433.920 T2W K, T4W K
BENINCA' 433.920 L O T X 1 W , L O T X 2 W ,
LO T X 4W
BENINCA' 433.920 T O .G O 2 W P , T O .G O 4 W P ,
T O .G O 2 W K , T O .G O 4 W K
BERN ER 868,300 B e rn e r B H S 1 4 0
BERN ER 868,300 B e rn e r B H S 1 3 0
B E S ID E 433.920 BEZA P
B E S ID E 433.920 H IT
BETA
E L E T T R O N IC A 330.000 BETALARM 5500
BETA
E L E T T R O N IC A 315,00 BETALARM 6500
Photos are the copyrighted property of their respective owners.

6EGO User manual
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
BFT 306.000
BFT 315.000 VTM 1, VTM 2, VTM 4
BFT 418.000 G T01, G T02, G T04
BFT 433.920 TE01, TE02 ( TEO 1, TEO 2 )
BFT 433.920 TE04 ( TEO 4 )
BFT 433,920 M IT T O 2 / 4 T R C 2 / 4
BFT 433,920
M IT T O 2 , M IT T O 4 : Solo se
il r ic e v ito re è C L O N IX 1 o
C L O N IX 2 c o n D IP 2 in
p o s iz io n e O N
CAM E 315.000 TO P312, TO P314
CAM E 315.000 TO P432N A , TO P434N A
CAM E 433.920
T432, T434, TO P432A,
TO P434A, TO P432,
TO P432N A , TO P434N A
CAM E 433.920 TO P432M , TO P434M
CAM E 433.920 TA M 432SA
CAM E 433.920 TO P432SA
CAM E 433.920 TO P432N A
CAM E 433.920 T W IN 2 , T W IN 4
CAM E 433,920 CAM E TO P-432EV, TO P-
434EV
CAM E 868,350 CAM E TO P862N A,
TO P864N A
C A R D IN 300.000 S300
C A R D IN 310.000 S301, S302
C A R D IN 433,920 S438-2
C A R D IN 433.920 S476 TX2, S476TX
CA R PER
300.000
310.000
318.000
C300, C310, C318, C318T
CASALI
GENIUS 330.000
CASALI
GENIUS 433.920
enius 433 2, G enius 433 3,
JA 400 TM 433, JA401
TM 433
C A S IT 306.000 ERTS92B, ERTS92T
C A S IT 433.920 ERTS92B, ERTS92T
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
C A S IT 433.920 ERTS20D B, ERTS20D Q
C A S IT 433.920 ERTS476D , ERTS476Q
C A S IT 433.920
T X S 1 , T X S 2 , T X S 3 , T X S 4 ,
TXS6
ERTS97B, ERTS97T
C E L IN S A 433.920 S10 1, S10 2, SAW 1, SAW 2
C E N T U R IO N 433.920 CLA SSIC, SM ART, SM A RT2
CHAM BERLAIN
LIFTM A STER
M O T O R L IF T
SEARS
CRA FTSM AN
300.000 Cham berlain 300M C
(m u ltic o d e )
CHAM BERLAIN
LIFTM A STER
M O T O R L IF T
SEARS
CRA FTSM AN
315.000
333LM
360LM , 362LM , 363LM
CHAM BERLAIN
LIFTM A STER
M O T O R L IF T
SEARS
CRA FTSM AN
390.000
50CB, 53CB, 750CB,
753CB, 50LM , 53LM ,
61LM , 62LM , 63LM ,
139.53100, 139.53110,
139.53200, 139.53210
54CB, 756CB, 54LM ,
64LM , 859CB
850CB, 853CB, 959CB,
81LM , 82LM , 83LM , 84LM ,
99LM 33LM
CHAM BERLAIN
LIFTM A STER
M O T O R L IF T
SEARS
CRA FTSM AN
418.000
4180, 4182, 4183
4185
787 rem ote keyless entry
CHAM BERLAIN
LIFTM A STER
M O T O R L IF T
SEARS
CRA FTSM AN
433.920 4330E, 4332E, 4333E
4335E
CPS 433.920 T C P 3 , C P S , J o lly 4
CPS 433.920
CPS1 TCP3, CPS2 TCP3,
CPS4 TCP3
EM 1CV, EM 2CV, EM 4CV
CRAW FORD 433,920 TX-433
D A SPI 433.920 H appy2, Pops2Â
Photos are the copyrighted property of their respective owners.

EGO User manual 7
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
D A SPI 433.920 D a s p i Z e r o 2 , Z e r o 2 C L O ,
Z e ro 4 C LO
D EA 306.000 306 1, 306 2, 306 4
D EA 306.000 306
D EA 433.920 433 1, 433 2, 433 4
D EA 433.920 G e n ie
D EA 433.920 Punto S2
D EA 433.920 Dea M IO TD2, M IO TD4
D ELM A 300.000 Apollo 300, ELSA M EC
A p o llo 3 0 0
D ELM A 300.000 M izard 300 1, M izard 300
2 , K in g
D ELM A 433.920 M izard 433 1, M izard 433
2
D ELM A 433.920 King 433 2
D ELM A 433.920 S t y le C o p y 2 C H (t h is is a
code duplicator)
D IC K E R T 433.920
M AHS433 01, M AHS433
04 non possiam o
g a ra n tire c h e p u ò essere
d u p lic a to , p o ic h e
dipende d a l r ic e v it o re
D IC K E R T 433.920
S10-433A1L00, S10-
433A4L00, S20-433A1L00,
S20-433A4L00, S20-
433A1000, S20-433A 4000
p o sson o essere d u p licati
solo i m odelli con
p u lsan ti ro ssi
D IC K E R T 433.920
S5-433-A 2L00, S5U-433-
A 2L00 p o sso n o essere
d u p lic a ti s o lo i m o d e lli
co n p u lsan ti rossi
D IC K E R T 868.350
H S 8 6 8 - 2 1
p o sson o essere d u p licati
solo i m odelli con
p u lsan ti ro ssi
D IC K E R T 868.350
S5-868A2L00, S5U -
8 6 8 A 2 L 0 0
p o sson o essere d u p licati
solo i m odelli con
p u lsan ti ro ssi
D IC K E R T 868.350
S10-868A100, S10-
868A400, S20-868A 1L00,
S20-868A4L00, S20-
8 6 8 A 1 0 0 0 , S 2 0 - 8 6 8 A 4 0 0 0
p o sson o essere d u p licati
solo i m odelli con
p u lsan ti ro ssi
D IG IC O D E 300.000
310.000
D C5010, D C5012,
D C5030, D C5032,
D C5040, D C5042,
D C5060, D C5062,
D C5070, D C5072
DITEC 433.920 GOL4C
DOITRAND
FDOITRAND 433.920
MPSTF2E JAUNE,
MPSTF4E, HYPERPHONE
MPSTF2E_GRISE
DOITRAND
FDOITRAND 433.920 TS2DE,TS4DE
DOORHAN 433,920
DOORMATIC 433.920 SAW
DUCATI
ALLDUCKS 433.920
TSAW1,TSAW2,TSAW3,
TSAW4, 124
ELBER TSAW1,TSAW2,
TSAW3,TSAW4
RONDY TSAW1, RONDY
TSAW2, RONDY TSAW3
DUCATI
ALLDUCKS 433.920
TPR10-A,TPR20-A
RONDY TPR10_A, RONDY
TPR20_A
DUCATI
ALLDUCKS 433.920 TE2
DUCATI
ALLDUCKS 433.920 HC6203, 6203: only blue, red and transparent
ELBE 433.920 501, 502, 504
ELBE 433.920 502a, 504°
ELBE 433,920 502,5
ELCA 300.000 Aster 1100,Aster 1101
ELCA 433.920 IRIS, IRIS 9CH.
Both colors red and blu
ELCA 433.920 ASTER2
ELCA 433.920
Aster 1000, Aster1001.
Colors: black, blue, light
grey
ELCA 433.920 GEMINI 9CH
ELCA 433.920 VIRGO
ECP 292.000 FIX 292 MHz F105611
ECP 292.000 KEY 292 MHz F106038
ELDAT
MFZ 433,920
Eldat RT20-4103M-01,
RT20-4104M-01, RT35-
4104M-01, RT21-4101M-
01, RT21-4102M-01
ELDAT
MFZ 433,920
Eldat RT28-4101M-01,
RT27-4101M-01, RT26-
4101M-02, RT21-4125M-
01, RT21-4139M-01,
RT21-4139M-02, RT31-
4139M-01, RT31-4139M-
02, RTC02-4104M-01
MARCA/BRAND FREQUENZA MODELLO FOTO
Photos are the copyrighted property of their respective owners.

8EGO User manual
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
ELD AT
M FZ 868,300
Eldat RT20-5004M -01,
RT20-5003M -01, RT35-
5004M -01, RT21-5001M -
01, RT21-5002M -01
ELD AT
M FZ 868,300
Eldat RT28-5001M -01,
RT27-5001M -01, RT26-
5001M -02, RT21-5025M -
01, RT21-5039M -01, RT21-
5039M -02, RT31-5039M -
01, RT31-5039M -02,
RTC02-5004M -01
ELEK 300.000 KTM 194B
ELEK 300.000 KTR4
ELV
CO N RAD 868,350
FS20 S4, FS20 S8, FS20 S8-
2, FS20 S16, FS20S16R,
FS20 S20-2, FS20 S20-3
ELV O X 433.920
ELV O X 433.920 ET03, ET04
ELV O X 868.350 ET08
EM FA 287.000 ET1, ET2, ET3
EM FA 308.000 ES_1, ES_2
ERO N E 433.920 SETD S39433E2,
SETD S39433E4
ERREKA 289.000 Erreka E20, Erreka E22
ERREKA 433,920
E r re k a L u n a , E r r e k a S M A T
1 R E S O N 1 , R E S O N 2 ,
RESO N 3
EU RO PE
A U T O M A T IS M E S 306,000 ASM Y1, A SM Y2, A SM Y4
EU RO PE
A U T O M A T IS M E S 433,920 ASM Y1, A SM Y2, A SM Y4
EU RO PE
A U T O M A T IS M E S 433,920 S1, S2, S3
FA A C 300,00 TM 300S, TM 300S05 H
FA A C 315.000 T1, T2, T3
FA A C 330.000 TM 1, TM 2, TM 3
FA A C 418.000 TM 1 418 D S, TM 2 418 D S,
TM 3 418 D S
FA A C 418.000 TM 418SL, TM 1 418SL,
TM 2 418 SL, TM 3 418SL
FA A C 433.920 TM 1 433 D S, TM 2 433 D S,
TM 3 433 D S
FA A C 433.920
TM L2 433 SLR, TM L4 433
SLR, TM L2-433-SLR, TM L4-
433-SLR
FA A C 433.920
TM L2 433 SLP, TM L4 433
SLP, TM L2-433-SLP, TM L4-
433-SLP
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
FA A C 868.350 TM 1 868 D S, TM 2 868 D S,
TM 3 868 D S
F A D IN I/B P T 315.000 ASTRO 75-1, ASTRO 75-2,
ASTRO 75-4
F A D IN I/B P T 433.920 433 2M , Astro43_2m
F A D IN I/B P T 433.920 Astro433-2, Astro433-4,
Astro43-2, A stro43-4
FERPO RT 433.920 T a c 1 , T a c 2 , T a c 4 , T a c 1 k ,
Tac2k, Tac4k, Tac2kr
FUNKM ODUL
ELSECO 433,920 T433A2K1, T433A2K2
FUNKM ODUL
ELSECO 433,920 T433A2K4, T433A2K4n
G IB ID I 306.000 TS2M
G IB ID I 433.920
O pen TM B 433, O PEN
T M Q 4 3 3 , O P E N O U T 2 ,
O P E N O U T 4
GO BBATO 306.000 T306
G RIFFO N 433,920
G r i o n 4 3 3 M H z d ip
s w itc h r e m o te s a n d
d u p lic a tin g re m o t e s
G RIFFO N 403,550
G r i o n 4 0 4 M H z d ip
s w itc h r e m o te s a n d
d u p lic a tin g re m o t e s
G TO 318.000 G T O M ig h t y M u le 1 / 2
buttons, RB741, RB742
G TO 318.000 G T O M ig h t y M u le 3
b u tto n s, R B 7 4 3
G U LLIV ER 306.000 M D RQ 306
G U LLIV ER 433.920 M D W 2 E
H AU SS 433.920
Pocket 3750-1,
Pocket3750-2, Pocket
3750-4
HEDDOF 318.000 P219-1, P219-2
HEDDOF 318.000 P220-1, P220-2, P220-3
H O RM A NN
H O ERM A N N
HÖERM A N N
433.920
H S M 2 , H S M 4 , y e llo w
b u tto n s P le a se n o te th a t,
in Netherlands,
Hoerm ann sell this kind
of rem ote control w hich
tra n s m it a ro llin g c o d e : in
th is c a s e it c a n n o t b e
duplicated!
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H S 1 , H S 2 , H S 4 , b lu e
b u tto n s
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H SD 2
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H SE2, H SE4, blue buttons
Photos are the copyrighted property of their respective owners.

EGO User manual 9
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H S M 2 , H S M 4 , b lu e
b u tto n s
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H S P 4 , b lu e b u t to n s
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H SS2, H SS4, blue buttons
H O RM A NN
H O ERM A N N
HÖERM A N N
868.300 H SZ1-868, H SZ2-868
H O RM A NN
H O ERM A N N
HÖERM A N N
433,920
RS2-433, RS4-433 (Rolling
c o d e v e rs io n s , u s u a lly
sold in Netherlands)
JA Y 433.920 U B E I x 1 S L 1
JA Y 433.920 U B E T 1 1 , U B E T 2 1 , U B E T
31, U BET 41, U BET 61Â
JC M 290.000 ET1, ET2, ET3
KEY
AUTOM ATION 433,920 900TXB-42, 900TXB-42N , 900TXP-42, 900TXP-42N
KEY
AUTOM ATION 433,920 900TXB-44, 900TXG -44
KEY
AUTOM ATION 433,920
900SUB-44, 900SUB-44N ,
900SUB-44W , 900SU B-
44W N
KEY
AUTOM ATION 433,920
900TXK-42, 900TXW -
42,900TXK-44, 900TXW -
44
LA BEL
IU P P IT E R 306.000 M D R , IU P P IT E R 3 0 6
LA BEL
IU P P IT E R 433.920 R J W / 1 E , R J W / 2 E , R J W / 4 E , RJW /12E
LA BEL
IU P P IT E R 433.920 M D W /1 E , M D W /2 E
LEB 306.000 TSA 4
LEB 433.920 TM W
LEB 433.920 TSAW 2N , TSAW 4N
LEB 433.920 T C P 3 Ã ‚ (t h is is a c o d e
d u p lic a to r )
LEB 433.920
TRK4 N ote: receiver
s h o u ld b e c o n  g u r e d t o
d is a b le ro llin g c h e c k .
LEB 433.920 TPW 4
LEB 868.300 TPK4
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
L IN E A R 300.000
310.000
M U LTI-CO D E 308911,
308913, 1089
L IN E A R 300.000
310.000
M U LTI-CO D E 412001,
414001, 109410, 109710
L IN E A R 300.000
310.000
M U LTICO D E 306010,
307010, 108210
L IN E A R 300.000
310.000
M U LTI-CO D E 308301,
308302
L IN E A R 300.000
310.000 M U LTI-CO D E 105015
L IN E A R 310.000
D e lta 3 M o o re -o -M a tic:
D T , D T 2 , D T 2 A , D T 2 2 A ,
DTC, DTD
L IN E A R 310.000 D e lt a 3 M o o re - o - M a tic :
D T3, D T4
L IN E A R 310.000 D e lt a 3 M o o re - o - M a tic :
M ini-T LB "LadyBug"
L IN E A R 312.000 D elta3 D TK (canada)
M A SYSTEM 433.920 M A T X 1 , M A T X 2 , M A T X 3
M ARANTEC 418.000 D 212, D 222, D 232
M ARANTEC 433.920 D 101
M ARANTEC 433.920 D 12
M ARANTEC 433.920 D 212, D 222, D 232
M ARANTEC 433.920 D igital 302, D 302
M ARANTEC 433.920 D igital 304, D 30
M ARANTEC 868.300 D igital 302, D 302
M ARANTEC 868.300 D igital 304, D 304
M CZ 433.920 A ste r
M eißner
M EISSN ER 433.920 LW 433-1, LW 433-2, LW 433-4
M eißner
M EISSN ER 433.920 Pocket 3750 1, 2, 4
M O N SEIG N EU R 433.920 ARC2, ARC4
M O N SEIG N EU R 433.920
TD R 400 3845, TD R 400
3846, TD R 400 3847
T1SAW 433, T2SAW 433,
T4SAW 433
M KTECH N O
M K -T E C H N O 306,00
M K -T E C H N O T X 1 a n d
M K T E C H N O T X 2 w it h R E D
LED
Photos are the copyrighted property of their respective owners.

10 EGO User manual
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
M OTORLINE
STATEU R O P 433.920
M X 1 , M X 2 , M X 3 , M X 4 ,
M X6
M X11, M X12, M X13
M O TO STA R 433.920
CLIKSTAR2, CLICKSTAR4
CLICK-4M , CLICKSTAR RE
532, CLICKSTA R RE 534
N IC E 306.000 EASY S1, S2, S4
N IC E 433.920 FLO 1, FLO 2, FLO 4
N IC E 433.920 VERY VE
N IC E 433,920 SM ILO SM 2, SM 4
NOLOGO 306.000
NOLOGO 433.920 E C O D IP
NOVOTECNICA 306.000 B IT N 1 , B IT N 2
NOVOTECNICA 306.000 BIT N T1, BIT N T2, BIT N T4
O&O
O e O , O a n d O 433.920 T - C O M D S 4 -2 , T -C O M D S 4 -4
O&O
O e O , O a n d O 433.920 O e O T X 4 - E , T X 2 - E ( r e d b u tto n s)
O&O
O e O , O a n d O 306.000 O eO TX2, TX4 (green b u tto n s)
OPENOUT 306.000 TS2M
OPENOUT 433.920 TM Q 433 2, TM Q 433 4
PIAZZETTA 433,920 4 buttons for w ood/pellet
heater
P O R T A M A T IC 433.920 M PH 01, M PH 02
P O W E R F I X P r o f
(L id l) 433.920 RCB-A 3600R
PRA STEL 306.000 N C S M T 1 , N C S M T 2 P ,
N CSM T4P
PRA STEL 306.000 K M F T 2 P , K M F T 4 P ,
KM FT2P93, KM FT4P93
PRA STEL 433.920 M PSTF2E, M PSTF4E
PRO EM 433.920 ER2C4ACM , ER4C4ACM
PRO G ET 433.920 ETY_433N 2, ETY 433N 4
PRO G ET 433.920 EM I433-N 2
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
PRO TECO 433.920 TX433
PRO TECO 433.920 E U R O M A T IC
PRO TECO 433.920 H IT
P U JO L 288.000 JC M T R IN A R IO 1 ,
T R IN A R IO 2 , T R IN A R IO 3
P U JO L 288.000 T T 1 , T T 2 , T R IN A R IO 1 ,
T R IN A R IO 2
PU LSA R 318.000 9931-318, 9931T-318
QUASAR 287.000 T x S A 4 , S e r ie A r g e n t o , S A
QUASAR 287.000 TXSA 2T
QUASAR 306.000 300 2, 300 4
QUASAR 433.920 433 TAN G O SLIM BLEU
Q U IC K 433,920 M odel: 302
R IB 433,920 M O O N -433
R IB 433,920 cod 433-1/2/3
R IB 433,920 Sun
RO G ER 433.920 R80/TX12, R80/TX14,
R80/TX12R, R80/TX14R
RO G ER 433.920 H 80/TX22
RO G ER 433.920 G80/TX32, G 80/TX34,
G 80/TX32R, G 80/TX34R
SEA 433.920
SEA 433.920
SM ART433_TX2_D IP,
SM ART433_TX3_D IP
SM ART433_TX2_CO PY,SM
ART433_TX3_CO PY
S m a r t 2 D ip S w it c h ,
S m a r t 3 D ip S w it c h
SEA 868.350 231103, SEA868_4
SEA 868.350 231103, H ead2 D ip
S w itc h
SEA 868.350
SM ART868-TX2-D IP,
SM ART868-TX3-D IP
S m a r t 2 D ip S w it c h ,
S m a r t 3 D ip S w it c h
SEAV 306/330
T X 1 , T X 2 , T X 3 , T X 4 ,
TX1/330
TX2/330, TX3/330,
TX4/330
SEAV 433.920 TXS1, TXS2, TXS3, TXS4
SEAV 433.920 B e h a p p y S 1 , B e h a p p y S 2 ,
B e h a p p y S 3
Photos are the copyrighted property of their respective owners.

EGO User manual 11
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
SEAV 433.920 B e E a s y T X , B e E a s y
M u ra le 2
SEAV 433.920 BeSm art S2, BeSm art S4
SEAV 433.920 BeFree S1
SEAV 868.300 B e S m a r t H 2 , B e S m a r t H 4
SEAV 868.300 BeFree H 1
SECU RV ERA 433.920 S V R 2 C
SECU RV ERA 433.920 S V R 4 C
SECU RV ERA 433.920 S V R 6 C
SECU RV ERA 433,920 S V R 2 C
SEN D ER 433,920.
SERA I 310.000 O G /3 2
SERA I 433.920 O G/52, O G /54, O G /82,
O G /8 4
SERA I 433.920 O G/28, O G /48, O G /62,
O G /6 4
SERA I 433.920 O G /02, O G/04
S IC E 433.920 T X 4 C L A C K B ig fo o t
S IL V E L O X -
IN T R A 306,000 G re e n c a s e w it h b la c k b u tto n s
S IL V E L O X -
IN T R A 433,920 S ilv e lo x In t r a H S M 4
S IM B A 433,920 S im b a R C 1
S IM IN O R 433.920 ER2C4ACM , ER4C4ACM ,
ER2C4ACS, ER4C4A CS
S K Y L IN K 300.000
310.000
M ultiLink SD 300M ,
Skylink 100, LD310M ,
SD 310M
S K Y L IN K 318.000 S k y lin k M ltilin k P D -3 1 8 M
S K Y L IN K 390.000
M ultilink CB-390M , CD -
390M
(v e r s io n s c o m p a tib le w it h
Cham berlain)
SM D 433.920
LW 433-1, LW 433-2,
LW 433-4 : AM m odels
o n ly
SO M FY 433.920 L E B T M W
SPARKRITE S R A 2 -2
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
STA G N O LI 433.920 ZEU S AZTR
STA G N O LI 868.350 ZEU S AZTR
STA N LEY 310.000 24286
STA N LEY 310.000 1082
STA N LEY 310.000 1050
STA N LEY 310.000 1094
STA N LEY 310.000 1097
STA RTEC 433.920 TXQ 2
S T IN G E R
300.000
310.000
318.000
390.000
300M CD 21V, 300M CD 22V
310M CD 21V, 310LID 21V,
310LID 22V
318ALD 31V
390LM D 21V, 390LM PB1V di. colors
TA U 315.000 250 TXA2, 250 TXA4
TA U 433.920 250 SLIM , 250K-SLIM ,
250K-SLIM C
TA U 433.920 250TXD 2, 250TXD 4
TA U 433.920 250BU G 2, 250BU G 4
TA U 433.920 250T-4, 250T-4C
TEC KEY 300.000 M K1010
TECN O M ATIC 433.920 TQ 433
TED SEN
BERN ER
G FA
433.920 S K X 1 M D , S K X 2 M D ,
SKX3M D , SKX4M D
TED SEN
BERN ER
G FA
433.920 SKX1KD, SKX2KD,
SKX4KD, SKX6KD
TED SEN
BERN ER
G FA
433.920 S K X 1 D L , S K X 2 D L , S K X 3 D L ,
SKX4D L
TED SEN
BERN ER
G FA
433.920 S K X 1 L C , S K X 2 L C , S K X 3 L C ,
SK X 4LC
TED SEN
BERN ER
G FA
433.920 SKX1SL, SKX2SL, SKX3SL,
SKX4SL
TED SEN
BERN ER
G FA
433.920 SKJ
TED SEN
BERN ER
G FA
433.920
S K X 1 W D , S K X 2 W D ,
SKX4W D , SKX11W D,
SKX22W D , SKX44W D
TELC O M A 306.000 RCST2, RCST4
Photos are the copyrighted property of their respective owners.

12 EGO User manual
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
TELC O M A 433.920 T A N G O 2 S W , T A N G O 4 S W
TELC O M A 433.920
T A N G O B L U E 2 , T A N G O 4
BLUE, TANGO BLEU 2,
T A N G O B L E U 4
TELC O M A 433.920 T A N G O 2 N , T A N G O 4 N
TELC O M A 433.920 T A N G O 2 S L IM , T A N G O 4
S L IM
TELC O M A 433.920
Telcom a N oire2, N oire4
Note: Rolling-code
ju m p e r s h o u ld b e
rem oved from the
receiver!
TELC O M A 433.920 TANGO W IN3
TELC O M A 433.920 TA N G O 2, TA N G O 4
TELC O M A 433,920 T e lc o m a E D G E 2 , T e lc o m a
ED G E 4
TELEM ATIC 300.000 TL1, TL2
TKC 433.920 TSAW 433
TO N K A RR 287.000 TK2
TO RA G 433.920 S429 1, S429 2, S429 4
T O R M A T IC
D O RM A 433.920 H S, D orm a H S43 1E, H S43 2E, H S43 3E, H S43 4E
T O R M A T IC
D O RM A 433.920 M A H S , S ie b a u , N o v o fe rm , D o rm a
T O R M A T IC
D O RM A 433.920 M H S, M H S43-1
TREM A 433.920 TO 93TV1, TO 93TV2,
TO 93TV4
TUBAUTO 433.920 D IG ITA L 101 433
V2 306.000 TRR1_306
V2 318,000 TPS1K
V2 433.920 M ATC H
V2 433.920 TCP3
V2 433.920 TCP3, ARC3
V2 433.920 TCP3
M ARCA/BRAND FREQ U EN ZA M O D E LLO FO TO
V2 433.920 TPR
V2 433.920 T1SAW /433, T2SAW /433,
T4SAW /433
V2 433.920 TRR1, TRR2, TRR4
V2 433.920 PM R2, PM R4
V IS O N IC 315.000
W T100, W T100A, W T101,
W T101A, W T102,
W T104,W T-201, W T-201A,
W T-201W P, W T-201AW P
V IS O N IC 418.000
W T-100, W T-100A, W T-
101, W T-101A, W T-102,
W T-104,W T-201, W T-
201A, W T-201W P, W T-
201AW P
V IS O N IC 433.920
W T 100, W T 100A, W T
101, W T 101A , W T 102,
W T 104,W T 201, W T 201A ,
W T 201W P, W T 201AW P
VSEG 433.920 C R S L IM
W AINE-DALTON 433.920 S429-1, S429-2, S429-4,
S429-m ini
W AINE-DALTON 433.920 S425
W ECLA
CDS 433.920 433, 433_2
ZU LLA N 315.000 250TXA1H , 250TXA2H,
250TXA4H
O EM 315.000
Photos are the copyrighted property of their respective owners.

EGO User manual 13
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER - GROUP 1
1) Enter set up
Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly
(pic. B).
2) Select channel
Press the key (channel) on which you want to store the original transmitter (key 1 for channel 1, pic.
C).
1
2
4
pic. A pic. B
1
pic. C pic. D
PRODUCER MODEL
ACM TX2 color
ADYX/GENIUS
TE 4433H blue, Bravo TE 4433H,
Echo TX4
ALLMATIC
BRO4WN, BRO4W red, BROOVER,
BROSTAR, MINI PASS, TECH3
APRIMATIC TM4, TR2, TR4, TX2, TX4M
BENINCÀ
APPLE4WV, CUPIDO2, CUPIDO 4, IO,
T2, T4WV, TO-GO 2, TO-GO 4WV
CASALI / GENIUS 252, 252 new, 254, 254 new
DEA GENIE-R W, MIO TR2, MIO TR4
FAAC 433 XT4 433 RC
FADINI Juby433, Juby small
GIBIDI
AU1600, AU1610, AU1680, AU1810,
DOMINO
MHOUSE GTX4, MT4, TX3, TX4
MOVOO MT4, MT4G, MT4V
NICE SMILO
NORMSTHAL/ CRAW-
FORD
433-2k, 433-4k, EA433-2k, EA433-
4k, EA433-2KM, T4334
PUJOL
Vario-black, Vario3-ocean, Vario-
P2153
SEAV
BE GOOD RH1, BE HAPPY RH1, RH2,
RH3, RS1, RS2, RS3
V2 PHOENIX, PHOX, TRC4, Handy
PRODUCER MODEL
LIFTMASTER 433 94335E, 84335EML, 94335E-old
SILVELOX ECO-TSM2, 3400155
LIFTMASTER 15/390 OG 28, OG 48
DOORHAN T4
ERONE 433/868 SERIE 07, FLAT, MINI, STANDARD
Compatibility table
ROLLING CODE GROUP 1 Compatibility table ROLLING CODE GROUP 1
EGO
EGO32

14 EGO User manual
3) Program EGO
Press and hold key 1 and 2 for about 2/3 seconds and release: led on original transmitter will blink.
Transmit seed code keeping the original transmitter about 5cm far from EGO (pic. E) pressing the key
(channel) you intend to store into EGO. When the code is detected EGO red led goes o and green
led will start to blink, at this point you can release the key. (pic. F).
If you want to add another code on a dierent channel please goes back to step 2 within 3 seconds
(until the.green led blinks rapidly).
At this point EGO is an emulator of the original transmitter and must be added into the receiver.
4) Add EGO to the receiver
Get closer to the receiver and:
a) Press and hold key2, then press and hold key 4 (pic. G) until the red led lights steady, then release
both (pic. H).
b) Press the key (channel) you want to add into the receiver (key 1 for channel 1, pic. I).
Green led will start to blink indicating the initiation of the communication with the receiver, which
can last 25-30 seconds (Pic. J).
c) Wait for the receiver feedback (opening gate, lights, …) indicating that EGO has been recognised.
Important: the receiver may has been set up not to accept new transmitters. In this case for the
correct procedure please refer to receiver manufacturer instructions.
pic. F 3 sec
>>> >>> >>>
FLASH
x 3
pic. E
original
CLICK
5cm
pic. G pic. H
2
4
1
pic. I pic. J
FLASH
FLASH
FLASH

EGO User manual 15
If the procedure fails because the original transmitter is not compatible, after 10 seconds
both led will start to blink alternately.
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
GROUP 2 (FAAC and GENIUS)
1) Enter set up
Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly
(pic. B).
2) Select channel
Press the key (channel) on which you want to store the original transmitter (key 1 for channel 1, pic.
C), both led will be lit steady (pic. D).
3) Program EGO
Press and hold key 1 and 2 for about 2/3 seconds and release: led on original transmitter will blink.
Transmit seed code keeping the original transmitter about 5cm far from EGO (pic. E) pressing the
key (channel) you intend to store into EGO. When the code is detected EGO red led goes o and
green led will start to blink, at this point you can release the key. (pic. F).
1
2
4
pic. A pic. B
1
pic. C pic. D
FLASH
FLASH
FLASH
pic. E pic. F
5cm
>>>
FAAC FAAC
1
2
1
2
GENIUS
1
21
2
PRODUCER MODEL
FAAC DL2 868 SLH, DL4 868 SLH, T2, T4, TML2 SLH, TML4, SLH, XT2 SLH, XT4 SLH
GENIUS AMIGO JA 332, AMIGO JA 334, KILO TX2, KILO TX4
Compatibility table
ROLLING CODE GROUP 2
EGO

16 EGO User manual
IMMEDIATELY after press and hold again the original transmitter’s key until EGO green led goes
o, nally to conrm the success of the procedure the red led will blink for about 3 seconds.
If you want to add another code on a dierent channel please goes back to step 2 within 3 seconds
(until the.green led blinks rapidly).
If the procedure fails because the original transmitter is not compatible, after 10 seconds
both led will start to blink alternately.
Important: AAC/GENIUS transmitters comes in two variants: MASTER and SLAVE. Only the former
can transmit the seed code and so be successfully duplicated. You can recognise a MASTER trans-
mitter when pressing a key: it will blink once before remaining steady.
EGO as MASTER transmitter
At this point EGO is an emulator of the original transmitter and can be used as MASTER to program
other EGO and original FAAC/GENIUS transmitters.
Seed code
This feature can be used when it is necessary to emulate an EGO / FAAC on a new EGO transmitter.
Press and hold key 3, then press and hold key 4. The red led will light steady. Release both keys and
press the key which source code is needed (key 1 for channel 1, pic. below).
>>>
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
3
4
1

EGO User manual 17
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
GROUP 2 (BFT)
1) Enter set up
Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly
(pic. B).
2) Select channel
Press the key (channel) on which you want to store the original transmitter (key 1 for channel 1, pic.
C), both led will be lit steady (pic. D).
3) Program EGO
Press and hold key 1 and 2 (new models) or hidden button (old models) for about 2/3 seconds and
release: led on original transmitter will blink. Transmit seed code keeping the original transmitter
about 5cm far from EGO (pic. E) pressing the key (channel) you intend to store into EGO. When the
code is detected EGO red led goes o and green led will start to blink, at this point you can release
the key. (pic. F).
IMMEDIATELY after press and hold the original transmitter’s key (channel) until EGO green led
goes o, nally to conrm the success of the procedure the red led will blink for about 3 seconds.
If you want to add another code on a dierent channel please goes back to step 2 within 3 seconds
(until the green led blinks rapidly).
1
2
4
pic. A pic. B
1
pic. C pic. D
PRODUCER MODEL
BFT KLEIO TX2, KLEIO TX4, MITTO 2, MITTO 4, RB, RCB2, RCB4, TRC2, TRC4, TX2, TX4
Compatibility table
ROLLING CODE GROUP 2 (BFT)
EGO
pic. E
pic. F
5cm
BFT
FLASH
FLASH
FLASH
>>>

18 EGO User manual
4) Add EGO to the receiver
At this point EGO is an emulator of the original transmitter and must be added into the receiver.
Get closer to the receiver and:
a) Press and hold key2, then press and hold key 4 (pic. G) until the red led lights steady, then
release both (pic. H).
b) Press the key (channel) you want to add into the receiver (key 1 for channel 1, pic. I).
Green led will start to blink indicating the initiation of the communication with the receiver,
which can last 25-30 seconds (pic. J).
c) Wait for the receiver feedback (opening gate, lights, …) indicating that EGO has been recognised.
Important: the receiver may has been set up not to accept new transmitters. In this case for the
correct procedure please refer to receiver manufacturer instructions.
If the procedure fails because the original transmitter is not compatible, after 10 seconds
both led will start to blink alternately.
Seed code
This feature can be used when it is necessary to emulate an EGO / BFT on a new EGO transmitter.
Press and hold key 3, then press and hold key 4. The red led will light steady. Release both keys and
press the key which source code is needed (key 1 for channel 1, pic. below).
3 sec
>>>
pic. G pic. H
2
4
1
pic. I pic. J
FLASH
FLASH
FLASH
3
4
1

EGO User manual 19
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
GROUP NICE
Required: an original and working NICE transmitter.
1) Enter set up
Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then re-
lease (pic. A).
2) Select channel
Press the key on which you want to store the new code. The led blinks 3 times for conrmation (pic.
B).
3) Add EGO to the receiver
This procedure must be done nearby the automation’s receiver. Get closer the receiver and:
a) a) press and hold the EGO key (channel) for about 5 seconds (pic. C);
b) press 3 times the equivalent key on the NICE original transmitter (pic. D);
c) press once the EGO key (channel) again.
Please wait at least 10 seconds before trying to activate the automation with the newly pro-
grammed EGO.
If the procedure fails, wait 20 seconds before trying again from step 1.
EGO32
PRODUCER MODEL
NICE FLO2R, FLO4R, VERY VR, ERA-INTI2, ERA-ONE2, ERA-ONE4
2
3
Slow
blinking
3 sec
pic. A
>>>
Fast
blinking
1 time pic. B
FLASH
x3
5 sec
PRESS x 3
>>> >>>
pic. E
pic. C pic. D
Compatibility table
ROLLING CODE GROUP NICE

20 EGO User manual
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
GROUP PRASTEL
1) Enter set up
Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then rele-
ase (pic. A).
2) Select channel
Press the key on which you want to store the new code 4 times. The led blinks 3 times for conrma-
tion (pic. B).
3) Add EGO to the receiver
This procedure must be done nearby the automation’s receiver. Get closer the receiver and:
a) Press key 1 and 2 on the original transmitter then release; led will light steady for about 2 se-
conds (pic. C).
b) When the led goes o the original transmitter send a signal to the receiver to go in program-
ming mode. The receiver remains in this state for 10 seconds during which you have to press the
EGO key (channel) you want to add into the receiver (pic. D). Every entry reset the 10 seconds
count-down, so it is possible to add another.
Receiver will exit from programming mode automatically after 10 seconds has passed from the last tran-
smission. If the procedure fails, wait 20 seconds before trying again from step 1.
2
3
Slow
blinking
3 sec
pic. A
>>>
Fast
blinking
4 times
pic. B
FLASH
x3
pic. C
1
2
pic. D
>>>
EGO32
PRODUCER MODEL
PRASTEL TC4E, BFOR, MPSTL1E, MPSTL2E, MPSTL4E, MPSTP2E, MPSTP2
Compatibility table
ROLLING CODE GROUP PRASTEL