Abilia Gewa Andromeda IR-DET 3 User manual

Rev B SE, GB, FR, DE
Manual
SE: Bruksanvisning för
Gewa Andromeda IR-detektorer
GB: Manual for
Gewa Andromeda IR-detectors
FR: Notice d’utilisation des
détecteurs infrarouge Gewa Andromeda
DE: Handbuch für
Gewa Andromeda IR-Detektoren

2

3
Contents
SE: Svensk bruksanvisning för Gewa Andromeda IR-detektorer........................................... 4
Beskrivning........................................................................................................................ 4
Placering............................................................................................................................ 5
Anslutning.......................................................................................................................... 5
GB: English Manual for Gewa Andromeda IR-detectors........................................................ 6
Description......................................................................................................................... 6
Location............................................................................................................................. 7
Connection ........................................................................................................................ 7
FR: Notice d’utilisation des détecteurs infrarouge Gewa Andromeda .................................... 8
Description......................................................................................................................... 8
Emplacement..................................................................................................................... 9
Connexion ......................................................................................................................... 9
DE: Handbuch für Gewa Andromeda IR-Detektoren ............................................................10
Beschreibung....................................................................................................................10
Montage............................................................................................................................11
Anschluss.........................................................................................................................11

4
SE: Svensk bruksanvisning för Gewa Andromeda IR-
detektorer
Beskrivning
Gewa Andromeda IR-detektorer förstärker IR-signalerna och överför informationen till
mottagaren. Detektorerna finns i olika kapslingar för inomhus- och utomhusmontering.
419860 Gewa Andromeda IR-DET 3
419865 Gewa Andromeda IR-DET 15
Plastkapsling med 3 eller 15 m skärmad kabel.
Diskret montage som döljer skruvfastsättning.
Användningsmiljö: Inom- och utomhus.
Kapslingsklass: IP-65.
Storlek: 70 x 42 x 28 mm.
Färg: Polarvit.
419870 Gewa Andromeda IR-DET
Detektor för montering på vägg.
Användningsmiljö: Inomhus.
Kapslingsklass: IP-21.
Storlek: 96 x 96 x 36 mm.
Färg: Polarvit.
419875 Gewa Andromeda IR-DET OEM
Detektor för inbyggnad.
Storlek: 49 x 20 x 19 mm.
Ledningslängd: 200 mm.
Material: Metallbelagd plast.

5
Placering
Välj om möjligt plats där detektorn är skyddad från direkt infallande solljus, vilket sätter ner
räckvidden. Observera att detta är ett optiskt system och man bör därför ha fri sikt mellan
sändare och detektor. Inomhus reflekteras dock ljuset mot väggar, golv och tak. Ljusa
material ger en god reflektion medan mörka ger en sämre reflektion. Glas släpper igenom IR-
ljuset.
Anslutning
Anslutning av detektor till mottagare sker enligt anvisningen för respektive mottagare. OBS!
Inkopplingsanvisning hänvisar till detektorkabelns färger. Var noggrann vid inkoppling av
detektorn till mottagaren, felanslutning kan medföra att elektroniken skadas. Vid förlängning
av detektorledning kan EKKX 1x2x0,5 användas. Max total ledningslängd är 100m.
OBS! Vid montering av Gewa Andromeda IR-DET OEM skall detektorns hölje alltid vara
isolerad från elektriskt ledande material.
OBS! Detektorer som är nämnda i denna manual kan endast kopplas till Gewa Andromeda
IR-mottagare.

6
GB: English Manual for Gewa Andromeda IR-detectors
Description
The Gewa Andromeda IR-detectors amplify the IR-signals and transfer information to the
receiver board. The detectors are available with different casings for in- or outdoor mounting.
419860 Gewa Andromeda IR-DET 3
419865 Gewa Andromeda IR-DET 15
Plastic cover with 3, or 15 m shielded cable.
Discreet mounting that hides the screws.
Surroundings: Indoors and outdoors
Degrees of protection: IP-65
Size: 70 x 42 x 28 mm.
Colour: Polar white.
419870 Gewa Andromeda IR-DET
Detector for mounting on a wall.
Surroundings: Indoors.
Degrees of protection: IP-21.
Size: 96 x 96 x 36 mm.
Colour: Polar white.
419875 Gewa Andromeda IR-DET OEM
Detector to be built in.
Size: 49 x 20 x 19 mm.
Cable length: 200 mm.
Material: Metal covered plastic.

7
Location
If possible choose a location where the detector is protected against direct sunlight, which
reduces the range. Please note that this is an optical system and consequently there must be
no obstructions between the transmitter and the detector. Indoors the light however is
reflected against walls, floor and ceiling. Light materials are good reflectors while dark
materials are bad ones. Glass will let the IR-light through.
Connection
Connect the detector according to the instructions for each individual receiver. NOTE! The
connection instructions refer to the colours of the detector cable. Be careful when connecting
the detector to the receiver. Making the wrong connection may damage the detector. When
lengthening the detector cable EKKX 1x2x0.5 is used. Maximum 100 m detector cable can
be connected.
Note! When mounting the Gewa Andromeda IR-DET OEM the detector casing must be
isolated from electrically conducting material.
Note! Detectors included in this manual can only be connected to Gewa Andromeda IR-
receivers.

8
FR: Notice d’utilisation des détecteurs infrarouge Gewa
Andromeda
Description
Les détecteurs Gewa Andromeda amplifient les signaux infrarouges et transmettent
l'information à la carte réceptrice (récepteur). Ces détecteurs existent sous plusieurs formes
selon l'utilisation : Intérieur ou extérieur.
419860 Gewa Andromeda IR-DET 3
419865 Gewa Andromeda IR-DET 15
Coque plastique avec câble blindé de 3 ou 15 m.
Montage discret, vis non apparentes.
Utilisation: Intérieur ou extérieur.
Indice de protection : IP-65.
Dimensions : 70 x 42 x 28 mm.
Couleur : Blanc polaire.
419870 Gewa Andromeda IR-DET
Détecteur pour montage en applique.
Utilisation : Intérieur.
Indice de protection : IP 21.
Dimensions : 96 x 96 x 36 mm.
Couleur : Blanc polaire.
419875 Gewa Andromeda IR-DET OEM
Détecteur pour montage intégré.
Dimensions : 49 x 20 x 19 mm.
Longueur de câble : 200 mm.
Matériau : Métal recouvert de plastique.

9
Emplacement
Choisissez si-possible un emplacement où le détecteur est protégé des rayons directs du
soleil. Notez qu'il s'agit d'un système optique et qu'il ne doit pas y avoir d'obstacles entre
l'émetteur et le détecteur. Dans un environnement intérieur, le faisceau infrarouge se
réfléchit sur les murs, les sols et les plafonds. Les matériaux de couleur claire réfléchissent
mieux le rayonnement infrarouge que ceux de couleur sombre. Par ailleurs, un rayonnement
infrarouge peut traverser le verre.
Connexion
Le raccordement du détecteur au récepteur doit être réalisé conformément aux instructions
du récepteur concerné. N. B. : Les instructions de raccordement renvoient aux couleurs des
câbles du détecteur. Soyez très prudent lorsque vous réalisez le raccordement du détecteur
au récepteur car une mauvaise connexion risquerait d'endommager le système électronique.
Pour prolonger le câble du détecteur, vous pouvez utiliser un câble EKKX 1 x 2 x 0,5 mm².
La longueur maximale du câble est limitée à 100 m.
N. B. : Lors de l'installation du détecteur Gewa Andromeda IR-DET OEM, le boîtier du
détecteur doit être électriquement isolé de tout matériau conducteur.
N. B. : Les détecteurs mentionnés dans ce manuel ne peuvent être connectés qu'à des
détecteurs infrarouge Gewa Andromeda.

10
DE: Handbuch für Gewa Andromeda IR-Detektoren
Beschreibung
Die Empfänger der Gewa Andromeda Reihe verstärken die IR-Signale und übermitteln die
Informationen zur Schaltung. Die Detektoren gibt es in verschiedenen Gehäusen für Innen-
und Außenmontage.
419860 Gewa Andromeda IR-DET 3
419865 Gewa Andromeda IR-DET 15
Plastikgehäuse mit 3 oder 15 m Koax-Kabel.
Diskrete Montage durch verdeckte Verschraubung.
Benutzungsbereich: Außen- und Innenmontage
Schutzart: IP-65.
Abmessungen: 70 x 42 x 28 mm.
Farbe: Polarweiß.
419870 Gewa Andromeda IR-DET
Detektor für Wandmontage.
Benutzungsbereich: Innenmontage.
Schutzart: IP-21.
Abmessungen: 96 x 96 x 36 mm.
Farbe: Polarweiß.
419875 Gewa Andromeda IR-DET OEM
Gehäuselos zum Einbau.
Abmessungen: 49 x 20 x 19 mm.
Kabellänge: 200 mm.
Material: Plastik mit Metallbelegung

11
Montage
Wenn möglich einen Platz wählen, wo der Detektor gegen direkt einfallendes Sonnenlicht
geschützt ist, welches die Reichweite herabsetzt. Beachten Sie, daß dies ein optisches
System ist und darum freie Sicht zwischen Sender und Detektor erforderlich ist. Drinnen wird
aber das Licht von Wänden, Decke und Fußboden reflektiert. Helles Material gibt eine gute
Reflektion, wogegen dunkles eine schlechtere Reflektion gibt. Glas ist für IR-Licht
durchlässig.
Anschluss
Der Anschluss des Detektors an den Empfänger erfolgt entsprechend der Anleitung für den
jeweiligen Empfänger. ACHTUNG! Der Anschlussplan weist auf die Detektorkabelfarben hin.
Bitte beachten Sie beim Anschließen des Detektors an den Empfänger, dass falsches
Anschließen Schäden an der Elektronik zur Folge haben kann. Verwenden Sie zum
Verlängern des Detektorkabels EKKX 1 x 2 x 0,5. Die maximale Gesamtlänge des Kabels
beträgt 100 m.
ACHTUNG! Bei der Montage des Gewa Andromeda IR-DET OEM muss die Kapselung des
Detektors immer gegen elektrisch leitendes Material isoliert sein.
ACHTUNG! Der in diesem Handbuch beschriebene Detektor kann nur an den Gewa
Andromeda IR-Detektor angeschlossen werden.

12
Abilia AB, Kung Hans väg 3, Sollentuna, Box 92, 191 22 Sollentuna, Sweden
4198XX Manual Andromeda DET SE, GB, FR; DE RevB.docx April 2013
This manual suits for next models
2
Table of contents
Languages:
Other Abilia Security Sensor manuals
Popular Security Sensor manuals by other brands

Prosensors
Prosensors BIOT V1.2 user manual

Ludlum Measurements
Ludlum Measurements 43-147 manual

B.E.G. LUXOMAT
B.E.G. LUXOMAT PD2N-KNX-ST-EM Mounting instructions

Teknetics
Teknetics Turbo Operation manual

La Crosse Technology
La Crosse Technology D013.105.M3 Product overview guide

Bosch
Bosch DS940P installation instructions

EDS
EDS EV-395 technical information

STEINEL PROFESSIONAL
STEINEL PROFESSIONAL US 360 operating instructions

Elvira
Elvira LORNET-24 user manual

SEBSON
SEBSON IR_OUT_E manual

B.E.G.
B.E.G. LUXOMAT PD4-M-3C-TRIO-SM Installation and operating instruction

Winland Electronics
Winland Electronics WaterBug WB350 quick start guide