AbiS Budget User manual

Budget
Automatic Electric Hand Dryer
User Manual
Visit ABIS Electronics Help Center:
https://www.abiselectronics.co.uk/apps/help-center
ABIS Electronics,
85 Great Portland Street, London,
W1W 7LT, UK
https://www.abiselectronics.co.uk
To register for warranty, please visit:
https://www.abiselectronics.co.uk/pages/warranty-registrati
on-form

3. Do not install the hand dryer near corrosive or flammable gases or
objects. It may cause fire or product damage and malfunction.
4. Do not install the hand dryer in an environment with high
temperature or dust, as it may cause product damage.
Technical Parameters:
Note before installation:
Components Name:
1. Warning: do not use the hand dryer near water, in places such as
bathtubs, showers, basins, or other containers with water.
2. Children should be supervised to ensure they do not play with the
device. The hand dryer is intended to be used indoors only.
3. Professional installation is highly recommended to install power
lines to avoid electric shock hazards.
4. Ensure the device is unplugged before installation.
5. Ensure you install an earth leakage circuit breaker to prevent shock
and fire hazards.
6. Do not unassemble, repair or alter the hand dryer on your own to
avoid the risk of an electric shock, fire, and other accidents.
Attention
1. Before installation, ensure there are no other objects around
400mm. Do not install the hand dryer on the stainless steel or artificial
marble surface to avoid misoperation.
2. The hand dryer unit should be firmly fixed to the even surface
(wall).
Rated Voltage AC 220 - 240V
AC 110 - 127V Waterproof Grade
Sensing Distance
Air Speed
Overall Size20-30S
IPX1
12 ± 3 cm
12 m/s
225 x 282 x 160 mm
50/60 HZ
1500W
Rated Frequency
Rated Power
Drying Time
Warning

Installation Method:
1. Take off the cover (Picture 2)
2. Drill 3 holes according to dimensional drawing, fix the hand dryer
on the wall with the plastic plug and screws (Picture 3)
3. Put the cover on the machine and cover it using the hexagon
wrench.
4. Plug the hand dryer in power.
Test Operation:
After installation, please test the hand dryer operation according to
the steps below:
1. The hand dryer should be in standby mode after the power has
been switched on.
2. The hand dryer should automatically stop after 60 seconds of
work.
1. If the hand dryer sensor is not working or turning on automatically,
please adjust the sensor distance trimmer. The trimmer is indicated in
Picture 1.
2. The closer you place your hands to the hand dryer, the faster they
dry.
3. Be careful of the surface heating when in use continuously.
Tips:
1. After washing hands, place hands under air outlet around 10 cm
away. The hand dryer will be automatically activated using the
automatic sensor. Please retreat the hands when hands are dried, and
it will stop working in 2 seconds.
2. After 60 seconds of continuous usage, the hand dryer will stop
automatically.
3. Do not dry any clothes or handkerchiefs, etc.
4. Do not pull the electric cord abruptly to avoid any short circuits.
5. Do not use the hand dryer for extremely long hours. The wind
outlet might get extremely hot and damage the sensor.
Usage:

Maintenance:
1. Ensure the device is unplugged before cleaning. Clean the shell
with a natural detergent when dirty.
2. Do NOT use alkalescent, lacquer thinner, abrasive detergents, or
detergents containing acid.
3. Do NOT use friction tools, such as nylon brushes to avoid shell
scratching.
4. When cleaning the shell, avoid the water drops inside the hand
dryer to prevent electric shock or short circuit.
5. To extend the service life, it is recommended to unplug the device
when it is not in use.
6. In case of the device break down, immediately unplug it from the
power and contact the professional electrician for repair.
7. If the hand dryer is not in use for a long time period, unplug it from
the power supply, and store it in a box inside a dry and clean space
after cleaning.
Terms of Guarantee:
1. The product warranty period is one year from the purchase date.
2. During the warranty period, in case of a warranty case, the device
can be replaced for free. The original invoice and the quality insurance
card stamped by the dealer will need to be presented by the
customer.
3. The following are NOT in the scope of free maintenance:
a. Improper use and fault caused by demolition, unassembling,
and repair by a technical specialist without ABIS
authorization.
b. Faults caused by fires, earthquakes, thunder, and other
natural disasters.
c. Abnormal voltage
d. Faults caused by non-matching power.
e. Faults caused by long-time operation in unacceptable
working conditions.
f. Warranty card and insurance card filled out incorrectly or
not explicitly.
4. After the 1-year warranty period, the maintenance of the product
is no longer free, while our company remains committed to service.
Step-by-Step Installation Guide:
Scan the QR code to read our Ultimate Guide on How
to Install an Electric Hand Dryer - Complete
Installation Guide on ABIS Electronics