Able-phone AP-6000 User manual

AP-6000
In-line, Voice Activated Telephone Dialer
User Manual
Dialer
Rev 1.01
To contact Ablephone:
Send us an email to [email protected]
Write to us at Ablephone, 3 4 Chatfield Avenue, Biggs, CA 9 917
Call us or Fax us at 30-846-7466
~1~

Visit us on the web at www.ablephone.com
AP-6000 ............................................................................................................................ 1
A word from us ............................................................................................................... 3
About this manual ............................................................................................................ 3
Chapter One .................................................................................................................. 4
Installin Dialer ............................................................................................................ 4
Addin names & numbers .............................................................................................. 4
Trainin Dialer with commands (di its ) ............................................................................ 5
Voice dialin ............................................................................................................... 6
Erasin a sin le name .................................................................................................... 7
Erasin all names .......................................................................................................... 8
Playback of all names .................................................................................................... 8
Chapter Two ................................................................................................................... 9
Workin with a Speakerphone ......................................................................................... 9
Chapter Three .............................................................................................................. 11
Frequently Asked Questions ......................................................................................... 11
2

A word from us
This Dialer is the new successor in the Dialer line of products. Years of
experience, market feedback, and use of the latest voice-recognition
technology have enabled us to build the most advanced voice-recognition
phone dialer in the world. We appreciate your trusting us by purchasing this
product, and we wish you a long and enjoyable experience with it.
Voice recognition is breaking new ground every day and is being used in
more and more everyday appliances and devices. But we ask you to keep
just one limitation in mind when using Dialer: The machine cannot hear better
then we do. It cannot understand the human voice when loud noises are
present. Sometimes it even needs to hear something twice, just as we do.
With this in mind, we are confident that you will use Dialer successfully!
Here are the new features that were not present in earlier versions of Dialer:
•High-quality name recording and playback.
•Missing-line detection and audio warning.
•4 digits per number to allow for all international and/or calling-card based
numbers.
•Menu-based microphone sensitivity setting (headset/speakerphone).
•A prefix digit and delay can be easily added or removed from all numbers (at
once) to enable, and wait for, outside line access.
•During a call, voice dialing can be activated again. This feature enables you
to use the dialer in online banking services, etc.
•Menu-based language selection.
•Menu-based mode change to allow Dialer to work independently or coupled
to a speaker phone, like the Clarity RC200, for a totally hands-free telephone system.
•Remote online support using the telephone line.
About this manual
This manual is divided into three main chapters:
•Chapter One describes how to install Dialer, add names,
erase a name or all names, listen to stored names and, most
importantly, dial a name using only your voice!
•Chapter Two describes how to dial a number during a
call, work with a speakerphone, work when connected to a
Private Branch eXchange (PBX), and change the spoken
language.
•Chapter Three answers Frequently Asked Questions, and
provides technical details, important notices, and warranty
information.
3

Chapter One
This chapter describes how to install Dialer, add names, erase a name or all
names, listen to stored names, and, most importantly, dial a name using only
your voice!
Installin Dialer
To use Dialer, install it by following these three steps:
A. Connect the supplied power adaptor to the AC wall outlet and to the
Dialer jack marked ‘Power’. When the power is applied, you should see
two bright blue lights light up, one on the 'phone' jack and the other on the
'line' jack of the Dialer unit. They indicate that the power is ON. If you do
not see these lights, please see the ‘Frequently Asked Questions’ section
in Chapter Three for assistance.
B. Connect the modular cord from your telephone to the Dialer jack
marked ‘Phone’.
C. Connect the supplied modular cord from the Dialer jack marked ‘Line’
to the modular phone jack on your wall.
That’s It! The Dialer is now ready to be used.
Addin names & numbers
Once the Dialer is connected, you can start adding names. Please follow
these steps:
A. Make a list of the names and numbers you wish to add to Dialer. This
list is important because it will simplify training the Dialer. Consider
these tips:
•Do not use very short names like ‘Joe’. Instead,
use both first and last names.
•If two names are very similar (first name, or last
names, are the same in both names), try training one of
the names in reverse order.
B. Choose a quiet moment, when no TV sounds or other background
noises are present. Training the unit in a noisy environment will result
in poor recognition later.
4

C. Dialer is shipped with a blank memory. Pick up the handset. The unit
will play back the main menu. Press ‘1’ to add a new name.
D. When asked, say the name to be added. Speak clearly but as normally
as possible. When prompted to repeat the name, do so. If the training
of the name has been successful, Dialer will ask you for the
corresponding phone number. If the training has failed, Dialer will
issue a sound that means a general error has occurred, or Dialer will
state the specific problem that has occurred.
E. When prompted, enter the number using your phone's keypad. You
can enter up to 4 digits. You can program pauses (3 seconds each)
within the phone number (to be used by calling cards or other
advanced services) by pressing the star key (*) twice. Press the pound
key (#) when you are done entering the number. Dialer will read back
the phone number you have just entered and then will store the name
and its number.
F. Dialer will automatically ask you for the next name. If you do not wish
to continue, simply hang up or press the pound key (#) to get back to
the main menu.
Trainin Dialer with commands (di its)
A. Choose a quiet moment, where no TV sounds or other background
noises are present. Training the unit in a noisy environment will result
in poor recognition rates later on.
B. Pick up the handset. If you have already trained Dialer with names, you
will hear the prompt "name to dial please". Press the # key following
this prompt. If you did not train it with names yet, you will hear the main
menu. Press ' ' to train the commands.
C. Dialer will now ask you to say the ten digits and star. You will need to
say each digit twice. After each digit, you will hear a playback of the
digit you just said. Move on to the next digit.
D. Once all digits have been trained, Dialer will ask you to train the dialing
command. This can be any word you wish but 'Dial Number' is always
a good choice.
That’s all! Dialer is now ready to listen to your voice and dial for you.
5

Voice dialin
Please follow these easy steps to dial:
A. Pick up the handset. If you have already trained Dialer with
names, it will ask you for name to dial. If you have trained it only with
digits, it will ask you for a number to dial. At the prompt, say the name
you wish to call or the first digit of the number you wish to voice dial.
B. If you said a name, Dialer will playback the recognized name
and will dial the corresponding number. If Dialer did not recognize the
name, you will be asked to try again. If Dialer still does not recognize
the name after 2 or 3 attempts, please see the ’Frequently Asked
Questions’ section in Chapter Three for assistance
C. If you said a digit, Dialer will respond with reading you back the
digit it recognized and will now wait for your next digit. Continue by
saying the digits of the number in this method. When you are done, say
the dial command. Dialer will now say 'Dialing…' and will repeat the
digits you have just said. Please listen to the read digits and verify they
are the digits you said. In case Dialer makes a mistake, simply hang
up. If all the digits are correct, Dialer will dial the number.
D. At the end of the call, simply hang up as you always do.
E. If you wish to redial the last number you said using digits, simply
say the dial command without any digits.
Please also note these followin eneral important remarks:
1. You can disconnect Dialer from AC power whenever
needed, without concern. The names and numbers will not be
lost, and your phone will continue to operate normally. The
same applies for a power outage.
2. If you are using a cordless phone, please verify that the
sound on the line is ‘clean’ with no ‘white’ noises. These ‘white’
noises, usually occur when the mobile part of the cordless
phone is far from its base. Such noises can make it difficult for
Dialer to recognize names.
3. To access the main menu, once memory has at least one
name stored in it, do the following:
a. Pick up the handset.
b. After Dialer prompts you for a name to call, press
the pound key (#).
6

4. If you would like to dial a number manually, do the
following:
a. Pick up the handset.
b. After Dialer prompts you for a name to call, press
any of the dialing keys except the pound key (#). Dialer
will connect you directly to the telephone line so that you
can dial manually.
5. Dialer is based on speaker-dependent voice-recognition
technology. This means that only the person who trained Dialer
can use it. However, two or more users can share Dialer. Each
user can store his/her own names and numbers, and then can
call them independently.
6. Dialer works only with the phone plugged into it, and not
with other phones on the same phone line. Dialer will recognize
names best if the phone used for training continues to be the
one used with Dialer. Substituting another phone for the one
used for training can lead to poor recognition results. Multiple
copies of Dialer can be used on the same phone line, each
working independently with the phone to which it is connected.
Erasin a sin le name
Erasing a single name from memory can be accomplished in two different
ways, as described below:
Method 1:
A. Pick up the handset. Dialer asks for a name to call. Press the
pound (#) key. The main menu will be played.
B. Press the ‘2’ key. Dialer asks for a name to erase. Say the name
you wish to erase.
C. If the name is found, Dialer asks you to confirm the erasure of
the name by pressing the ‘ ’ key. [Any other action (for example,
hanging up) will cause the name not to be erased.]
D. Press the ' ' button. The name will be erased and Dialer will
return to the main menu. If this was the last name remaining in
memory, a 'Memory Empty' prompt and a sound will be heard.
Method 2:
A. Pick up the handset. Dialer asks for a name to call. Press the
pound key (#). The main menu will be played.
7

B. Press the ‘4’ key. Dialer will start playing back the names it has
stored in its memory.
C. When you hear the name you wish to erase, press any of the
dialing keys, except the pound key (#). Dialer asks you to confirm
the erasure of the name by pressing the ‘ ’ key. [Any other action
(for example, hanging up) will cause the name not to be erased.]
D. Press the ' ' button. The name will be erased and Dialer will
return to the main menu. If this was the last name remaining in
memory, a 'Memory Empty' prompt and a sound will be heard.
Erasin all names
Warnin : Erasin all names is an irreversible operation. Use it with care!
A. Pick up the handset. Dialer asks you for a name to call. Press
the pound key (#). The main menu will be played.
B. Press the ‘3’ key. Dialer will prompt you with a warning
message.
C. Press the ‘9’ key to confirm the erasure. Any other action (for
example, hanging up) will cause the names not to be erased.
D. Press the '9' button. All the names will be erased, and a
'Memory Empty' prompt and a sound will be heard. Dialer will then
return to the main menu.
Playback of all names
Whenever needed, you can hear all the names and numbers stored in Dialer’s
memory by following these steps:
A. Pick up the handset. Dialer asks for a name to call. Press the pound
key (#). The main menu will be played.
B. Press the ‘4’ key. Dialer will playback all the stored names. Press the
pound key (#) or hang up to finish the playback. Press any other dialing
key to erase the played name. See the section entitled "Erasing a
single name" above for more details.
8

Chapter Two
This chapter describes how to dial a number during a call, work with
a speakerphone, enable Dialer to work when connected to a Private
Branch eXchange (PBX), and change the spoken language.
Dialin a number durin a call (currently works only with the US / UK languages selected)
While in a call, you can activate the name-dialing or digit-dialing
function again in order to transmit DTMF tones needed for online
banking services, calling cards, etc. To activate this feature, do the
following:
A. Pick up the handset. Dialer asks you for a name to dial. Say the
name you wish to dial. Dialer dials that name.
B. While in the call, stay silent for a second (make sure the other
party is silent as well), and say "activate dialing".
C. Dialer will now engage again and will ask you for a name to dial.
Say the name you wish to dial during the call. Dialer will transmit
the number to the line.
D. If you wish, you can repeat this process over and over again.
Simply return to step B above.
E. You can also say digits, and Dialer will transmit your digits to the
line. Once you say the first digit, you can continue and say more
digits, without the need to say "activate dialing" between each
digit.
Example: Say you wish to access your account status using your
bank's automatic telephone service. You can store your bank
telephone number under the name "bank", your account number
under the name "account", and your pin code under the name "pin".
Then voice dial to your bank; and, when asked to punch in your
account number, simply say "activate dialing". Dialer will ask you
for a name to dial. Say the name "account", and Dialer will transmit
the tones of your account number to your bank. Then, when asked
to punch in your pin number, say "activate dialing" again followed
by the name "pin". This method can be used in other situations that
require dialing a number during a call.
Workin with a Speakerphone
Dialer can be connected and used with a speakerphone. Since
working with a speakerphone usually means that the voice signal
level coming from the user will be lower then when working with a
handset, it is recommended (but not mandatory) that you change
Dialer's microphone mode by following these steps:
9

A. Pick up the handset. If names are stored, Dialer asks you for a
name to call. Press the pound key (#).
B. While hearing the main menu, press the '7' key to toggle between
'handset mode' and 'speakerphone mode'. Select 'speakerphone
mode'.
Workin with the Clarity RC200 speakerphone
Dialer has a unique operational mode, called "Basic" which is
specifically designed to work with the RC200 speakerphone. In this
mode, after you press the speakerphone button (or pick up the
handset), Dialer will silently wait for the pound key (#) to be pressed.
Only after that key has been pressed will Dialer resume normal
operation, such as asking for a name to dial or reading the menu. This
pound key (#) will be transmitted from the RC200. Follow these easy
steps to activate the “Basic” mode:
In Dialer:
A. Pick up the handset. If names are stored, Dialer asks you for a
name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '9' key to toggle between
'Basic mode' and 'Freedom mode'. Select 'Basic mode'.
In the RC200:
A. Follow the manufacturer’s instructions on how to set up
the RC200; and make sure that the phone, the remote
control, and any other optional accessories work. Be sure to
turn off the scan feature, as described on page of the
manufacturer’s instructions for the RC200.
B. Program only the first memory location with a single
pound key (#).
Now connect the RC200 to Dialer, as described in Chapter 1 of this
manual for any other telephone. Please note that, if you wish to add
names, you will be required to use the RC200 keypad.
To place a call, give the remote control a short press and wait for Dialer
to ask you for a name to call. To end the call, press the remote control
again.
Workin with a PBX
There are situations where Dialer is not connected directly to a phone
line, but rather to a Private Branch eXchange (PBX). A good example
is a nursing home. To get an outside line, one usually needs to dial a
10

prefix digit, such as 9, and only then dial the actual number. If there is a
need to set a prefix digit for all the stored numbers (as when moving
from a private residence to a nursing home), do the following:
A. Pick up the handset. If names are stored, Dialer asks you
for a name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '8' key. Dialer will
now ask you to set the digit that will serve as the external line
access digit. Press the desired digit. To abort this feature, press the
star key (*).
Chan in the spoken lan ua e
In order to change the language that Dialer uses, do the following:
A. Pick up the handset. If names are stored, Dialer asks you for
a name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '0' key to enter the
language menu. Listen, and press the digit that represents your
desired language.
Chapter Three
This chapter answers Frequently Asked Questions and provides
technical details, important notices, and warranty information.
Frequently Asked Questions
The following is a list of the most common questions and problems
encountered when using Dialer. If you cannot find a solution to your problem
here, please do contact us.
Question: I have connected the unit as described in this manual; but, when I
pick up the handset, I hear nothing. What can be wrong?
Answer: Dialer may be set to work in "Basic" mode. Pick up the handset,
press the pound key (#) and listen. If you now hear the unit speaking, then set
Dialer back to the "Freedom" mode. See the section entitled “Working with
the Clarity RC200 speakerphone” in Chapter Two for details.
11

If that did not help, make sure the power is on. You should see two bright blue
lights turned on. Then check that all of the connections from the phone to
Dialer and from Dialer to the line are both correct and secure. Check
especially that you have connected your phone to the ‘phone’ jack and the
line to the ‘line’ jack on Dialer. If you reverse these connections, Dialer will not
work and you will hear nothing. If you still cannot hear anything, connect the
phone directly to the line, without Dialer. If you do not hear a dial tone now,
then either your phone or cable is at fault
Question: When I try to add a new name, I keep hearing ‘please repeat’ or a
warning sound, and the name will not train. What am I doing wrong?
Answer: This symptom usually has two main causes:
1. You are trying to train the name while background noise
is present. This can be any noise from people in the room with you,
a TV or radio working in the same room, or even loud noises
coming from construction taking place near you. As mentioned
above, you should try and train names in a quiet environment.
2. You are not repeating the name consistently during
programming. Try to say the name the same way when asked for it
twice during programming.
Question: When I try to dial a name or to erase a name, Dialer says “Name
not recognized”. What can be wrong?
Answer: Assuming you have trained this name in a quiet environment as
mentioned above, you may not be saying the name the same way you did
during programming. To listen to a playback of the name, use key ‘4’ while in
the main menu. (Please refer to Chapter One of this manual for exact
instructions.)
Question: Dialer now speaks in a language I do not understand. How can I
change it back to my desired language?
Answer: Pick up the handset. Press the pound key (#) to reach the main
menu. When you do, press the ‘0’ key to reach the language menu. Listen to
the different language options. When your desired language is heard, press
its index number.
12

Important notices:
Reasonable efforts have been made to verify the accuracy of the information contained herein, however
no guarantee can be made of accuracy or applicability. G.G. Electronics reserves the right to change
any specification or description contained herein. G.G. Electronics reserves the right to make changes
to or to discontinue any product or service identified in this publication at any time without notice in order
to improve design and supply the best possible product. G.G. Electronics does not assume
responsibility for use of any circuitry other than circuitry entirely embodied in a G.G. Electronics product.
Information contained herein is provided gratuitously and without liability to any user. Reasonable efforts
have been made to verify the accuracy of this information but no guarantee whatsoever is given as to
the accuracy or as to its applicability to particular uses. Applications described in this manual are for
illustrative purposes only, and G.G. Electronics makes no warranties or representations that the Dialer
product will be suitable for such applications. In every instance, it must be the responsibility of the user
to determine the suitability of the product for each application. G.G. Electronics products are not
authorized for use as critical components in life support devices or systems. Nothing contained herein
shall be construed as a recommendation to use any product in violation of existing patents or other
rights of third parties. The sale of any G.G. Electronics product is subject to all G.G. Electronics Terms
and Conditions of Sales and Sales Policies.
Dialer Voice Activated Phone Dialer Limited Warranty:
The product identified in this User Manual said by G.G. Electronics Ltd and sold in the United States
through it's authorized Dealers, are warranted to the original end-user purchaser to conform to the
applicable published specifications in effect at the time of shipment from G.G. Electronics Ltd to the
Dealer, and to be free from defects in material or workmanship under normal use and service for a
period of one year from the date of purchase by the original end-user. If any such product proves
defective during the one year warranty period, G.G. Electronics Ltd, at its option, will either repair the
defective product without charge for parts and labor, or provide a replacement in exchange for the
defective product. These remedies are the purchaser's exclusive remedies for breach of warranty.
This warranty does not cover (a) products which have been subjected to misuse, accident, physical
damage, improper installation, abnormal operation or handling, neglect, inundation, fire or operation
13
Data Value
Operatin volta e 12 Volts DC, re ulated.
DC Jack type 2.1 mm, polarity un-important
Maximum power consumption 850milliwatts
Phone/ Line jack type RJ11
Dialin Method DTMF (Dual Tone Multiple Frequency(
Maximum number of names to be stored 45
Type of memory device Flash
Max number of di its per name 45
Max name record/playback len th 3 Seconds
Minimum Data retention time 15 Years
Wei ht (No power supply or cables( 120 Grams (0.265 pound(
Physical Dimensions 134mm (5.276") in len th, 65mm (2.559") in
width and 23mm (0.906") in hei ht.
Workin Temperature 0-70 Celsius (32-158 Fahrenheit(
Approvals
ACTA part 68. FCC part 15 subpart B.
ETSI ES 203 021-2 V2.1.2 (2006-01(
ETSI ES 203 021-3 V2.1.2: (2006-01(
EN 55022:98 + A1(00) + A2(03(
EN 55024:98 + A1(01) + A2(03(
EN 61000-3-2:00 + A2(05(
EN 61000-3-3:95 + A1(01(
EN 60950-1:06

outside their published maximum ratings; or (b) products which have been repaired, altered, or modified
by anyone other than an authorized representative of G.G. Electronics Ltd; or (c) damages caused by
failed components, parts or accessories not sold by G.G. Electronics Ltd or not compatible with the
warranted product; or (d) products where warranty stickers, product serial number plates, electronic
serial number plates, or electronic serial numbers have been removed, altered, or rendered illegible; or
(e) cosmetic items such as, cables, labels, cases, etc; or (f) products shipped to G.G. Electronics Ltd for
repair from outside the United States.
For warranty service on defective products, the defective unit must be returned to G.G. Electronics Ltd
along with a description of the product malfunction or difficulty. Proof of the original end-user purchase
may be required to substantiate warranty status. The address to return the detective unit may be
obtained by emailing [email protected]. G.G. Electronics Ltd assumes no risk for damage or loss in
transit.
If in G.G. Electronics Ltd sole opinion the failure is not covered by the terms of this warranty, the original
end-user purchaser will be notified and authorization will be requested for repair. Products repaired
under warranty will be returned to the original end-user purchaser, transportation prepaid. Return
shipping costs for products repaired which are not covered by warranty or from the return of the product
for which the original end-user purchaser has not authorized the non-warranty repairs, shall be paid for
by the original end-user purchaser. Any products repaired or replaced under the terms of this warranty
shall be warranted for the remainder of the original product's warranty, or ninety (90) days, whichever is
longer.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILTY
AND FITNESS FOR A PARTICULAR PURPOSE.
UNLESS FURTHER LIMITED ELSEWHERE IN THIS WARRANTY, G.G. Electronics Ltd AGGREGATE
LIABILITY FOR DAMAGES FOR ANY CAUSE RELATED TO OR ARISING OUT OF THE USE OR
INABILITY TO USE THE PRODUCT WHETHER IN CONTRACT, NEGUGENCE, STRICT TORT, OR
BASED ON ANY OTHER LEGAL THEORY, SHALL NOT EXCEED THE ORIGINAL END-USER's
PURCHASE PRICE FOR THE PRODUCT.
IN NO CASE SHALL G.G. Electronics Ltd BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES
INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE,
LOSS OF USE OF THE PRODUCTS OR ANY ASSOCIATED EQUIPMENT, C0ST OF CAPITAL, COST
OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF
THIRD PARTIES, AND INJURY TO PROPERTY.
NOTE: SOME STATES D0 NOT ALLOW THE EXCLUSION 0R LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
There will be charges rendered for repairs to the product made after the expiration of the aforesaid one
(1) year warranty period. This warranty gives you specific legal rights.
14