AbleNet QuickTalker 7 User manual

Key Features Step 1 - Powering QuickTalker™
Step 2 - Select Level Step 3 - Recording Messages
Quickstart Guide
QuickTalker™7
QuickTalker™12
QuickTalker™23
a) Entering Record Mode
Press and hold the RECORD button on the back of device
until the red light is on, then release.
Select Level
Select LEVEL (1-5) by pressing the red button on the
front of the device.
Powering QuickTalker™
Turn the device to the back side. Insert 4 AA batteries
into the device where shown. Use the On/Off switch to
power the device.
b) Recording Messages
Press and hold the desired message location, begin
speaking after the beep, then release. Repeat for other
locations.
Tip! Speak 6-8” from the microphone for loud, clear sound.
c) Exiting Record Mode
Press and release the RECORD button. Lights turn off.
Note: The device will automatically exit Record Mode
after 20 seconds of no activity.
Level Selection
Volume
Adjust
Buttons
Level Indicators
Recording Indicator Light
Symbols
Overlay +
Storage
Full Length
Handle
Individual
Message
Locations
Core Message
Locations
Speaker
Power On/Off
Record Button
Battery Compartment
Power On/Off
Battery Compartment
Level Selection Level Indicators
Record Button
Recording Indicator Light

Warranty and Care
PN 900-80221 Rev. A (10/10)
Cleaning and Care
To clean wipe with a slightly damp cloth.
Warranty
AbleNet manufactured products include a two-year
limited warranty. This warranty is against defects in
materials and manufacturing for two-years from the date
of purchase.
More Information
You can find warranty, guarantee and return/repair
information online.
For more information on AbleNet products and services,
or for contact:
Step 4 - Playing a Message
Erasing Messages Advanced Features
Playing a Message
Press the desired location to play a message.
Note: Pressing another location will stop the current
message.
Single Location - Enter Record Mode, then quickly press
and release the location.
Level - Press and hold RECORD button for 10 seconds
and all messages on current level will be cleared. Core
messages will remain.
Master Clear - Press and hold RECORD button for
30 seconds and ALL QuickTalker messages will be cleared.
Core messages
The three core messages will be the same for all levels.
The last recorded messages will be played.
Locking the Controls (RECORD & LEVEL)
Press and hold the red RECORD and LEVEL buttons
simultaneously for 5 seconds. All lights will flash twice.
Repeat to unlock controls.
Adjusting Volume
Press the gray arrow buttons to adjust the volume.
Message and light function
When a location is pressed the record light will flash
yellow if the location is blank; red if recorded.
Volume Adjust Buttons
Record ButtonRecord Button Level Indicators