Abocom TC08 User manual

TC08
8 Port 10BASE-T Ethernet Hub
Introduction
The 8 port 10Base-T Ethernet Hub is designed for
plug-and-play installation and easy management. The
hub provides an Uplink connection via a RJ-45
connector, which makes it easy to expand an existing
network. The hub features LINK/ACT LEDs to
show the connection and receiving/transmitting
status of each port. POWER and COL LEDs show the status of the hub.
Features
 Compliant to IEEE 802.3 10BASE-T/2
standard
 Automatic partitioning function of each
port to isolate network failure
 Ethernet connections supported Category 3
twisted-pair cabling or better
 LED indicators for each twisted pair port
for linking and receiving diagnosis
 Uplink port for easy linking of more hubs
to further expand the network
 Compact design in palm size
 The hub’s housing made by metal material
Specifications
 Comply IEEE 802.3 (10BASE-T)
standards
 CSMA/CD protocol for complete data
integrity
 Plug-and-Play installation
 Cost effective, unmanaged hub allowing
interconnection of thin and STP/UTP
segments within a single device
 Automatic partitioning of faulty ports
 Compact palm size, light weight design
 Uplink port via straight-through cable
 Power-on self-testing LED Indication
 Status LED interface for easy maintenance
 Maximum On-Board
620mA@+2.5V(1.55W)