Abtus AVS-1200C/V2 User manual

* Specifications are subject to changes without notice.
SPECIFICATIONS
Multi Media
Controller
ABtUS SINGAPORE PTE LTD www.abtussinga ore.com
Model: AVS-1200C/V2
PROGRAMMABLE 2 x configurable com orts rovide control of Projector/Plasma/
MULTI MEDIA CONTROLLER AV Switcher via RS-232 commands
CONFIGURING COM PORT 1 x configuring com ort rovides rogramming of controller
and acts as a slave when configured with another Master
controller or PC AP control
IR LEARNING 1 x rogrammable IR control (IRMCs) enables customized IR
control of rojector when RS-232 control is not available
PROGRAMMABLE BUTTONS A total of 11 rogrammable buttons that can be configured with
RS-232 and/or IR control lus digital Volume control for Volume
U , Down and Mute control
CUSTOMIZED BUTTON In ut selection/control buttons can be customized with clearly
LABEL / TEXT labeled text/icon with cool backlit for visibility control even in
total darkness
LCD DISPLAY Clear indication of status and function of the controller through
a small LCD anel
CLOCK Built-in Clock function
AUTO SHUT-DO N TIMER A rogrammable timer that allows automatic shut down of the
system i.e. rojector to reserve energy and rolong the
rojector lam life
MACRO CONTROL Allows customized macro control, which makes control easier
for end users with just one touch of a button
VOLUME CONTROL Allows control of volume of media switcher and/or rojector
PANEL LOCK Programmable  anel lock functions that tie in with Auto
Shut down timer that revent any mis-use of the anel after
normal class timing and reset based on re- rogrammed time

Detail connection and configuration of the AV rojection system with AVS-1200CV2 and
AVS-1200SV2
User Operation Guide
PRODUCT DESCRIPTION SYSTEM DIAGRAM
PANEL OVERVIE
* Specifications are subject to changes without notification
The ABtUS AVS-1200C/V2 is a high performance Multi Media Controller
designed for any small Multi Media Class Room or boardroom application.
With its sim le integration and user friendly functions (easy to use) ABtUS
AVS-1200C/V2 can be easily integrated and acts as an extended central
media control unit. ABtUS offers a universal rojector controller that controls
a rojector's ower on/off, in ut switching, and volume control via RS-232
and/or IR. The ABtUS AVS-1200C/V2 can also be configured as a motorized
screen or room lightings control. It can also be easily mounted no matter
where it is: In a lectern, deskto , wall, or even a rack.
With ABtUS AVS-1200C/V2 controller, no user training is required. Presenters
would be able to walk in into any of these multi media classrooms or boardroom
and easily o erate the media system regardless of the ty e or brand of
rojector being used. Standardization also makes setu and maintenance
easier to integrate and su ort.

User Operation Guide
REMOTE CONTROL MODE
PROGRAMMING MODE
Panel Tab
This allows rogrammer to assign the button function name as according to the hysica
Control anel.
Note only button 2 to 7 are allows for assignment as the rest fixed with default function.
Buttons Function Name can be assign from its individual standard dro list. Once done the
rest of the Tab will follows this configuration accordingly
AV1200C
Program Editor
Allows ABtUS Media Controller AVS-1200CV2 to be control through this software
PHYSICAL CONTROLLER BUTTONS LAYOUT

User Operation Guide
PROGRAMMING MODE
Layer
When enable this allow second layout command to be configure accordingly
Hex Code
Command code entry for the relative button, only Hex Code is allows
Transmitter
Com 2 allows IR or Serial to be transmitted in the case if either one of the two is not available at
the Projector controlled. Check on the res ective box accordingly
PROGRAMMING MODE
1. Programming Mode:
1.1 Com2 Tab (Control of Projector)
This allows user to configure the communication ort 2 accordingly with res ect to their buttons
communication rotocol (command code of the rojector) as well as the its arameter setting.
Serial
This allow configuration of Com2 communication arameter i.e.
Baud rate, Data Bit, Parity Bit and Sto
bit of the controlled Projector.
Setting can be easily done with its individual dro list.
Bard Rate: 1200 to 115200
Data Bit: 7 or 8
Parity Bit: None or Odd or Even
Sto Bit: one
1.2 Com3 Tab (Control of ABtUS AV Switcher AVS-1200SV2 or any RS-232 controlled AV switcher)
This allows user to configure the communication ort 2 accordingly with res ect to their buttons
communication rotocol (command code of the rojector) as well as the its arameter setting.

User Operation Guide
PROGRAMMING MODEPROGRAMMING MODE
Serial
This allow configuration of Com3 communication arameter i.e. Baud rate, Data Bit,
Parity Bit and Sto bit of the controlled AV Switcher.
Default Parameter for AVS-1200SV2 is as followed:
Baud Rate: 9600
Data Bit: 8
Parity Bit: None
Sto Bit: One
Setting can be easily done with its individual dro list.
Bard Rate: 1200 to 115200
Data Bit: 7 or 8
Parity Bit: None or Odd or Even
Sto Bit: one
Layer
Notice that the Layer function is mask off, which means that Com Port 3 can only, allows
single layer command to be configured.
Hex Code
Command code entry for the relative button, only Hex Code is allows
Transmitter
Note that Com 3 ONLY allows Serial RS-232 transmission, No IR is allows in this case.
1.3 Infrared Tab
This allows user to configure/Learn the IR command code of the Controlled rojector in the case where
RS-232 is not available.
1.4 Macros Tab
Macros allows any buttons/fucntion to be link to either Power ON or Power Off button after s ecific
delay time from 5 to 10 sec.
Exam le: After Power ON set rojection screen Down with delay of 5 sec and set rojector default
in ut select to VGA with another 5 sec of delay.

User Operation Guide
PROGRAMMING MODEPROGRAMMING MODE
Clock setting
Check on Use PC Time to set time in 12 or 24 hour format with reference to PC time or
manually.
Auto Timer Off and Reset
Auto Time Off function will set the control to shut down when time u .
Exam le: After 8 m, system will auto shut down that is Turn off Projector, Turn off AV Switcher
and kee Projection Screen back home osition or de ending on the Macros setu .
Reset Timer This allow Reset of Panel Lock Function when Auto Timer Off is set with
Panel Lock enabled.
Panel Lock
This acts as a sim le Panel Lock which disable all function and control on controller, revent
miss handling or miss used of AV Projection System controlled.
Check enable to enable with a sim le selection of either two or three buttons combination
as activation. After which, Panel Lock and then be ON and Off by ress and hold the
selected two or three buttons combination at the same time for 3 to 5 min.
1.5 Relays Tab
This allows configuration of Relays digital I/O for controlling of [ rojection screen in
conjunction with ABtUS screen controller AVS-SSR8V2.
1.6 Timers/Misc
This allows system time to be set manually or base on rogramming PC time in 12 or
24 hour format as well as Auto Timer Off with Panel Lock and Reset after time out.

User Operation Guide
PROGRAMMING MODEPROGRAMMING MODE
Delay Time
Delay Time setu allows setting of delay time between switching function of rojector.
Exam le: Projector ON Warm u time, Projector Off Cool down time and Projector In ut
Switching interval time
All above timing defer from Brand and model of different Projector.
On and Off delay time range can set from 5 to 240 sec.
Other as in the switching delay timing is from 1 to 5 sec.
Auto Repeat
Auto Re eat function allow rojector Power ON and Power OFF command to be send
twice automatically with a delay time. This may be required base on different brand and model
of rojector.
Volume
Volume setu allows configuration of the volume setting for AV-Switcher or Projector.
Initial Volume set is the default volume setting for every Power ON.
2.0 Under File Tab
New - O ening a NEW roject
O en - O en of rogram
Save - Save a Project
Save as - Save a Project under different name and location
Exit - Exit of Multi Media Control Program
2.1 Opening a program file
2.3 Under Com port Tab
Setting of serial arameter of the PC configuration/communication between the PC and
Device Controller AVS-1200CV2
Com Port Setting:
Control Programs RS232 communication ort select.
Select range: COM1~ COM6.
Note:
Control Programs RS232 communication rotocol
default setu are as followed:
Baud Rate: 9600 b s.
Data length: 8 bits.
Parity: Non arity.
Sto bit: One bit.

User Operation Guide
PROGRAMMING MODEPROGRAMMING MODE
U loading of rogram file
Once rogramming is done, u loading can be done as followed:
Connect u the PC serial to the configuration com ort of the AVS-1200CV2 with the
communication arameter set as stated above.
Then click Connect to established the connection between PC and Device (AVS-1200CV2)
then click on Write to Device and click on OK as shown below
U loading of rogram:
The following windows will shows once the function is successful
Detail connection between PC and Device (AVS-1200CV2) for rogramming