AC Infinity CLOUDLINE A User manual

USER MANUALUSER MANUAL
CLOUDLINE A/B
MIXED FLOW INLINE FAN SYSTEMS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
CLOUDLINE A4
CLOUDLINE A6
CLOUDLINE A8
CLOUDLINE B4
CLOUDLINE B6
CLOUDLINE B8
MODEL
AI-CLA4
AI-CLA6
AI-CLA8
AI-CLB4
AI-CLB6
AI-CLB8
UPC-A
819137021747
819137021754
819137021761
819137021778
819137021785
819137021792
MANUAL CODE CLAB2109X1

5
MANUAL INDEX
Manual Index .................................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation (Mounting) ...................................................................
Installation (Hanging) ....................................................................
Installation (Motor Cap Orientation) ..............................................
Installation (Configuration Setup) ..................................................
Powering and Setup ......................................................................
Controller Mounting .......................................................................
Adding More Fans .........................................................................
Universal Infinity System ...............................................................
Cleaning ........................................................................................
Programming .................................................................................
Other Settings ................................................................................
FAQ ................................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 9
Page 14
Page 18
Page 19
Page 20
Page 23
Page 27
Page 28
Page 29
Page 31
Page 42
Page 43
Page 45
Page 46

6
KEY FEATURES
SMART CONTROLLER
Monitors temperature using
included 6” probe. Features
two UIS ports with climate
triggers and timers.
*For B-Series Only
*For A-Series Only
QUIET PWM MOTOR
PWM-controlled motor features
precise speed control, reduced
rotor noise, and energy-efficient
EC voltage.
IP-44 PROTECTION
The inline duct fan is sealed
to Ingress Protection 44
standards, rated with high
resistance to liquids and dust.
STATOR BLADE FANS
Hydro-mechanical stator
blades enable efficient airflow
delivery in high static pressure
environments.
SPEED CONTROLLER
Single button controller
with circular dot display that
enables fan speed control in
ten speeds.
DUAL BALL BEARINGS
The motor contains ball bearings
with an estimated 67,000 hour
lifespan. Enables the fan to be
mounted in any direction.

7
PRODUCT CONTENTS
CLOUDLINE A-Series
DUCT FAN
SYSTEM
(x1)
WALL
ANCHOR
(x4)
WIRE
TIE
(x6)
CABLE TIE
MOUNT
(x6)
DUCT FAN
SCREW SET
(x4)
CLOUDLINE B-Series
FAN UNIT (Included in both A-Series and B-Series)
WOOD
SCREWS
(x6)
TEMP.
PROBE
(x1)
WOOD SCREWS
(WALL HANG)
(x2)
SMART
CONTROLLER
(x1)
SPEED
CONTROLLER
(x1)
PROBE
MOUNT
(x1)
WOOD SCREWS
(WALL MOUNT)
(x1)
UIS F - 4PIN M
ADAPTER
(x1)
HANGING
STRAPS
(x2)
VELCRO
TIES
(x4)

8
PRODUCT CONTENTS

9
INSTALLATION
STEP 2
Remove the motor box from the flange bracket.
Remove the wind circle between the motor box
and the intake flange.
STEP 1
Unscrew the bolts on both sides from the
plastic rings using a Philips screwdriver.
MOUNTING

10
INSTALLATION
STEP 3
Use the flange bracket to set your desired fan
position. Mark the four mounting holes.
STEP 4
Drill four holes into the marked locations. Make
sure your mounting area is structurally sound
and free from obstruction.
MOUNTING

11
STEP 5
If you are mounting onto anything other than a
wood support or stud, insert the included four
wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them
through the holes.
INSTALLATION
STEP 6
Align the flange bracket’s holes with the wall
anchors. Screw in four wood screws with a
screwdriver or drill to secure the flange bracket.
Make sure its airflow arrow is pointing in your
desired direction.
MOUNTING

12
INSTALLATION
STEP 8
Slide the motor box back into the flange
bracket, making sure its airflow arrow is pointing
in the same direction as the flange bracket’s
arrow.
Screw the bolts back into the plastic rings to
secure the motor box to the flange bracket.
STEP 7
Place the wind circle back into the intake flange.
MOUNTING

13
STEP 9
If installing ducting, use the included duct
clamps to secure it to either end of the duct fan,
making sure there is a tight seal.
Tighten the duct clamps using a flathead
screwdriver.
INSTALLATION
MOUNTING

14
INSTALLATION
STEP 10(a) - Hanging Upward
If installing with rope hangers (sold separately),
loop the ropes around the flanges and tighten
the rope to secure the fan.
HANGING - ROPE CLIPS
STEP 10(b) - Hanging Downward
Loop the two rope hangers around a pole and
the fan's bracket.
Clip the carabiners onto each other. Shorten
the loops as needed.
Make sure the fan's airflow arrow is pointing
towards your desired direction.

15
INSTALLATION
STEP 1
Loop the strap around the bracket and a pole.
HANGING - STRAPS
STEP 2
Slip the strap through the inner ladder lock slot
from the bottom.

16
INSTALLATION
STEP 3
Route the strap into the outer ladder lock slot
from the top. Adjust the length of the completed
loop as needed.
HANGING - STRAPS
STEP 4
Tuck the loose end through the center gap of the
ladder lock to secure the loop.

17
INSTALLATION
STEP 5(b) - Hanging Upward
To hang the fan right-side up, loop and tighten
the straps, as shown in steps 1-4, around the
pole.
Hang the fan by the duct flanges to secure it.
HANGING - STRAPS
STEP 5(a) - Hanging Downward
Let the fan hang by the pole once the straps are
secure.
Make sure the fan's airflow arrow is pointing
towards your desired direction.

18
INSTALLATION
STEP 1
Unscrew the motor cap using a screwdriver.
MOTOR CAP
STEP 2
Rotate the motor cap to your desired
orientation. Reapply the screws.
Rotating the motor cap will not void your warranty.

19
INTAKE AND EXHAUST
This fan can be used as either an intake fan or an exhaust fan in grow rooms and larger grow tents.
To achieve optimal whole space ventilation, the intake fan or opening - if not using a fan - must be
situated at a bottom corner of your grow space. The exhaust fan must be hung (shown below) or
mounted at the highest opposite corner possible.
Make sure the intake fan’s airflow arrow is pointing towards your grow space and the exhaust fan’s
arrow pointing away from your grow space.
INSTALLATION
CONFIGURATION SET-UP

20
POWERING AND SETUP
STEP 2
Plug the fan’s power cord into an AC power
outlet to power the fan and controller.
STEP 1
Plug the duct fan’s UIS connector into the
speed controller.
A-SERIES