Acard ARS-2051PC User manual

ARS-2051PC/2074C/2078C
Card Reader to SATA DVD
Duplicator Controller
Copyright©2011 ACARD Technology Corp.
Release: May 2011
User's Manual
Version: 1.0
Attention:
Wait over 5 seconds to
power on after shutdown
to prevent the abnormal
operation of the system.

Copyright and Trademarks
The information of the products in this manual is subject to change without prior notice and does
not represent a commitment on the part of the vendor, who assumes no liability or responsibility
for any errors that appear in this manual.
ACARD and SCSIDE are the trademarks of ACARD Technology Corp.
This manual contains materials protected under International Copyright Laws. All rights reserved.
No part of this manual may be reproduced, transmitted or transcribed without the expressed
written permission of the manufacturer and author of this manual.
ACARD’s ARS-2051PC/2074C/2078C Duplicator Controller is used for copying and editing
personal audio and video data. Violating Copy Right is a criminal act. ACARD's Duplicator
Controller only supports legal backup operation.
ACARD Technology Corp. is not responsible for illegal recording.

Chapter 1 Introduction ...............................................................
1.1 Overview ............................................................................
1.2 Features ............................................................................
1.3 Specifications ....................................................................
1.4 System Requirement .........................................................
Chapter 2 Installation ...............................................................
2.1 Stand-alone Duplicator Controller ......................................
2.2 Complete Duplication System ............................................
2.3 Duplication System with no DVD Writer .............................
2.4 Installing the ARS-2051PC ................................................
2.5 Installing the ARS-2074C ...................................................
2.6 Installing the ARS-2078C ...................................................
Chapter 3 Basic Operations .......................................................
3.1 The Keypad and LCD ........................................................
3.2 Installing the hard drive for DVD Copier ............................
3.2.1 With an Internal Hard Drive .........................................
3.2.2 Without an Internal Hard Drive .....................................
Chapter 4 PCB Layout ...............................................................
Chapter 5 Operational Functions ...............................................
5.1 Flash Copier ......................................................................
5.1.1 Mem. Card Copy ..........................................................
5.1.2 Verify ............................................................................
5.1.3 Compare ......................................................................
5.1.4 Mem. Card Info ............................................................
5.1.5 Disc Info .......................................................................
5.1.6 Restore Card ...............................................................
5.1.7 Erase Disc ...................................................................
5.1.8 Model Select ................................................................
5.1.9 Setup ...........................................................................
5.1.9.1 Language ...............................................................
5.1.9.2 Burn Speed ............................................................
8
8
8
8
8
9
9
9
9
10
11
12
13
13
13
13
14
15
18
18
19
19
20
20
20
21
21
22
22
22
22
Table of Contents

5.1.9.3 Eject Disc ...............................................................
5.1.9.4 Multi-Session .........................................................
5.1.9.5 Button Sound .........................................................
5.1.9.6 Device Info .............................................................
5.1.9.7 System Info ............................................................
5.1.9.8 Update Firmware ...................................................
5.1.9.9 Compare Firmware ................................................
5.2 DVD Copier .......................................................................
5.2.1 Copy ............................................................................
5.2.2 Test ..............................................................................
5.2.3 Test & Copy .................................................................
5.2.4 Verify ............................................................................
5.2.5 Compare ......................................................................
5.2.6 Prescan .......................................................................
5.2.7 Disc Info .......................................................................
5.2.8 Select Source ..............................................................
5.2.9 Image ...........................................................................
5.2.9.1 Load .......................................................................
5.2.9.2 Delete Image .........................................................
5.2.9.3 Image Info ..............................................................
5.2.9.4 Compare Image .....................................................
5.2.9.5 Select Image ..........................................................
5.2.9.6 Image Src Drive .....................................................
5.2.9.7 Image Format Info .................................................
5.2.9.8 Edit ........................................................................
5.2.9.9 Format HDD ..........................................................
5.2.9.10 LoadImage Method ..............................................
5.2.10 Edit Track ...................................................................
5.2.10.1 CD to CD Edit ......................................................
5.2.10.2 CD to HDD Edit ....................................................
5.2.10.3 Close Session ......................................................
5.2.11 Mode Select ...............................................................
5.2.12 Setup .........................................................................
23
23
23
23
24
24
24
25
29
29
30
30
30
31
31
32
32
32
33
33
33
34
34
34
35
35
35
36
36
36
37
37
37

5.2.12.1 Language .............................................................
5.2.12.2 Burn Speed .........................................................
5.2.12.3 Auto Start Drive ....................................................
5.2.12.4 Auto Verify ...........................................................
5.2.12.5 Auto Compare ......................................................
5.2.12.6 Auto Prescan .......................................................
5.2.12.7 Eject Disc .............................................................
5.2.12.8 Burn On The Fly ..................................................
5.2.12.9 Burn Mode ...........................................................
5.2.12.10 Display Time ......................................................
5.2.12.11 Button Sound .....................................................
5.2.12.12 Device Info .........................................................
5.2.12.13 System Info ........................................................
5.2.12.14 Quick Erase .......................................................
5.2.12.15 Full Erase ..........................................................
5.2.12.16 Auto Close Tray .................................................
5.2.12.17 Quick Compare ..................................................
5.2.12.18 Tray-In/Out .........................................................
5.2.12.19 BootTime Delay .................................................
5.2.12.20 Start Tray Eject ..................................................
5.2.12.21 Disc Redetect ....................................................
5.2.12.22 Show Burn Speed ..............................................
5.2.13 Adv Setup ..................................................................
5.2.13.1 UnderRun Protect ................................................
5.2.13.2 Overburn ..............................................................
5.2.13.3 Read Error Skip ...................................................
5.2.13.4 Format HDD ........................................................
5.2.13.5 Verify HDD ...........................................................
5.2.13.6 Burn-in .................................................................
5.2.13.7 Update Firmware ................................................
5.2.13.8 Compare Firmware ..............................................
5.2.13.9 H/W Diagnostic ....................................................
5.2.13.10 Load Default ......................................................
38
38
38
38
38
38
39
39
39
39
39
39
40
40
40
40
40
40
40
41
41
41
41
41
42
42
42
43
43
44
44
44
44

5.2.13.11 CD+G .................................................................
5.2.13.12 ISRC & MCN ......................................................
5.2.13.13 USB Option ........................................................
5.2.13.14 CD-TEXT ...........................................................
5.2.13.15 Password ...........................................................
5.2.13.16 Disc Counter ......................................................
5.2.13.17 Auto Save Image ...............................................
5.2.13.18 Update Drive F/W ..............................................
5.2.13.19 F1 Hotkey Setup ................................................
5.2.13.20 F2 Hotkey Setup ................................................
5.2.13.21 Index ..................................................................
5.2.13.22 AutoRun Time ....................................................
Chapter 6 Troubleshooting ........................................................
6.1 About LCD .........................................................................
6.2 About Error Messages .......................................................
6.3 Compatible Flash Media ....................................................
6.4 About DVD-ROM/DVD Writers ...........................................
6.5 About Buttons ....................................................................
6.6 About DVD Writer Not Readable ........................................
6.7 About High Failure Rate .....................................................
6.8 About Firmware Update .....................................................
6.9 About Function 13 and Cancellation ..................................
Appendix A LCD Messages .......................................................
45
45
45
46
46
47
48
48
48
48
49
49
50
50
50
50
50
50
50
50
50
50
51

WEEE Statement
In order to cope with the increasing waste electrical and electronic equipment, reduce the use of
landfill and incinerator, and prevent the harmful matter of waste equipment from entering the
environment, the European Union (EU) has set the Directive on Waste Electrical and Electronic
Equipment (WEEE) asking manufacturers to collect, recycle and treat waste electrical and
electronic equipment properly. Member nations already established their free of charge recycle
systems of WEEE before August 13, 2005. Accordingly, ACARD has to be responsible for
recycling all products exported to Germany. You can return your ACARD product that needs
recycling to a local collector.
WEEE Erklärung
Mit dem Ziel die steigende Menge elektrischer und elektronischer Altgeräte zu bewältigen ohne
hierzu unnötig Mülldeponien und Verbrennungsanlagen zu belasten und um die Verschmutzung
der Umwelt durch freiwerdende Stoffe aus den Altgeräten zu vermeiden, hat die Europäische
Union (EU) die Richtlinie über Elektro- und Elektronik-Altgeräte erlassen. Die Richtlinie verpflichtet
Hersteller, elektrische und elektronische Altgeräte umweltgerecht einzusammeln, zu recyceln und
zu entsorgen. Die Mitgliedsstaaten der EU haben bereits ihre kostenfreien Recyclesysteme
konform der WEEE vor dem 13. August 2005 eingerichtet. Entsprechend der Richtlinie ist ACARD
verantwortlich für die umweltgerechte Entsorgung aller nach Deutschland exportierten ACARD
Produkte. Sie können Ihr zu entsorgendes ACARD Produkt zu Ihrer örtlichen Sammelstelle
bringen.
AEEA verklaring
Met het doel de stijgende hoeveelheid afgedankte elektrische en elektronische apparatuur te
beheersen zonder hiervoor onnodig stortplaatsen en verbrandingsovens te belasten en om de
vervuiling van het milieu door vrijkomende stoffen uit de afgedankte apparatuur te voorkomen,
heeft de Europese Unie (EU) de richtlijn betreffende afgedankte elektrische en elektronische
apparatuur besloten. Deze richtlijn verplicht fabrikanten afgedankte elektrische en elektronische
apparatuur in te zamelen, te recyclen en te verwijderen. De lidstaten van de EU hebben reeds de
kosteloze recyclesystemen volgens de AEEA vóór de 13 augustus 2005 ingericht. Conform de
richtlijn is ACARD verantwoordelijk voor de verwijdering van alle naar Nederland geëxporteerde
ACARD producten. U kunt uw afgedankt ACARD product naar uw locale inzamelplaats brengen.
Elektrik ve Elektronik Madde Atıkları Demeci
Elektrik ve electronik madde atıklarının yukselmesiyle basedebilmek ,arazi doldurma ve cop
yakma fırını kullanımını azaltmak,atık madde zararlarının cevreye yayılmasını onlemek icin Avrupa
Birligi (AB),ureticilerden elektrik ve elektronik madde atıklarını gerektigi gibi toplamalarını,geri
donusturmelerini ve kimyasal isleme tabi tutmalarını talep etmek icin Elektrik ve Elektronik Madde
Atıkları uzerine bir direktif hazırladı.Topluluk uyeleri,13 Agustos 2005' ten once elektrik ve
elektronik madde atıklarının ucretsiz geri donusum sistemlerini coktan olusturmuslardı.Bundan
dolayı, ACARD, Almanya'ya ihrac ettigi butun urunlerin geri donusumunden sorumludur.ACARD
urunleri geri donusum gerektirirse yerel toplayıcılara geri verebilirsiniz.
EnglishEnglishEnglish
German
Dutch
Turkish

WEEE бюлетень
ЧтобЫ сρaвиться сувеличивающимся ненуҗным электрическим иэлектронным
оборудованием, уменъшите использование закапывания мусора ииспользования установки
для с игания отходов, препятствуйте вредному выбросам загрязнять окру ановки среду,
Европейский союз (EC) установил Директиву по Нену ному Электрическому и
Электронному Оборудованию (WEEE) для того, чтобы изготовителей собрали,
перерабатывали ивообще проявили внимание кнену ному электрическому излектронному
оборудованию дол ным образом. Члены нации установили бесплатную систему и
электронному оборудованию дол ным образом. Члены нации установили бесплатную
систему переработки WEEE до 13 августа 2005. Соответственно, ACARD обязан быть
ответственным за то, что переработал все продукты, экспортируемые вГерманию. Вы
мо ете возвратнть ваш продукт ACARD, который ну дается врециркуляции местному
сборщику.
WEEE Statement
Afin de gérer la quantité croissante de déchets électriques et électroniques, de réduire l’utilisation
des décharges et des incinérateurs et d’éviter que des déchets nocifs ne polluent l’environnement,
l’Union Européenne a publié la directive WEEE sur les déchets électriques et électroniques. Celle-
ci spécifie que les fabricants doivent collecter, recycler et traiter l’équipement électronique et
électrique usagé. Depuis le 13 août 2005, les pays membres ont mis en place un système de
recyclage gratuit selon le WEEE,.
De ce fait, Acard est responsable du recyclage de tous les produits exportés vers l’Allemagne.
Vous pouvez mettre au rebut votre équipement ACARD usagé dans votre centre local de
recyclage.
Pour plus d’informations sur les lieux de mise au rebut des équipements usagés destinés au
recyclage, veuillez contacter votre mairie, votre service de traitement des déchets ménagers ou le
magasin où vous avez acheté le produit.
RAEE
Con la finalidad de reducir el incremento de residuos eléctricos y de material electrónico,
reduciendo el uso de los vertederos e incineradoras y prevenir el preocupante aumento del
contacto de estos residuos con el medio ambiente. Por este motivo la Unión Europea ha fijado la
Directiva de Residuos de Aparatos Eléctricos y Electrónicos (RAEE) solicitando a los fabricantes
la recolección, reciclaje y tratamiento de ests residuos correctamente. Los paises miembros ya
han establecido su sistema de reciclaje gratuito de RAEE antes del 13 de Agosto del 2005. Por
este motivo ACARD es el responsable del reciclaje de todos los productos exportados a
Alemania. Usted puede devolver su producto Acard a un punto de recogida local cuando desee
reciclarlo.
Dichiarazione WEEE
Per far fronte all’aumento dei residui delle apparecchiature elettriche ed elettroniche, ridurre l'uso
di materiale di riporto e degli inceneritori, ed impedire che il materiale nocivo delle apparecchiature
residue entri a contatto con l'ambiente, l’ Unione Europea (UE) ha stabilito le Direttive sui Residui
delle apparecchiature Elettriche ed Elettroniche (WEEE) chiedendo ai fornitori di raccogliere
correttamente, riciclare e trattare le apparecchiature elettriche ed elettroniche residue. Le nazioni
facenti parte dell’ Unione Europea hanno già stabilito il loro sistema gratuito di riciclaggio di questo
materiale (WEEE) prima del 13 agosto 2005. Di conseguenza, ACARD è responsabile del
riciclaggio di tutti i prodotti esportati in Germania. Potete restituire il vostro prodotto acquistato da
ACARD che deve essere riciclato da un’ azienda specifica locale.
Russian
French
Spanish
Italian

ARS-2051PC/2074C/2078C Manual
8
Chapter 1 Introduction
1.4 System Requirement
Upright external case ARS-2051PC: 2/3 x 5.25”
ARS-2074C: 5/6 x 5.25”
ARS-2078C: 9/10 x 5.25”
A 300W power supply
SATA cable
DVD-ROM (DVD Copier)
DVD writer x 1~2 (ARS-2051PC) / x 2~4 (ARS-2074C) / x 6~8 (ARS-2078C)
A hard drive (optional)
A removable hard drive rack (optional)
AEC-4420S (optional)
1.1 Overview
ARS-2051PC/2074C/2078C Card Reader to DVD Duplicator is a standalone duplicator controller
with USB Card Reader supporting high speed DVD burning. It does not need connecting to a
computer or require much learning. Simply through the LCD and the button on the panel you can
make a DVD via USB Card Reader to burn direct to a DVD quickly. It is designed for the user who
is looking for a way of making instant backup memory card data, more efficient and much simple
solution, such as personal, SOHO and office users.
1.2 Features
Standalone USB to SATA DVD/CD duplicator controller
Totally independent without installing hardware or software
Supports a built-in 3.5” or 2.5” hard disk drive
Supports high-speed DVD/CD recording
Backs up DVD/CD in minutes
Has a user-friendly interface and shows messages with LCD
Provides optional functions to extend application
Firmware update by DVD-ROM
1.3 Specifications
ACARD SATA Controller
ACARD 32-bit RISC CPU
16Kbyte data cache inside the RISC CPU
High reliability of SDRAM for embedded system
2 SATA interface channels (ARS-2051PC) / 4 SATA interface channels (ARS-2074C) /
8 SATA interface channels (ARS-2078C)
USB ×1 / CF ×1 / SD ×1 / MS ×1 interface channel
2 × 16 LCD screen
A membrane 4-buttons operation panel
512KB of flash memory for Copy Code
Dimension : 190mm(W)×166mm(H)×270mm(D)
Power Source : DC 5V

Chapter 2 Hardware Installation
Before installing the ARS-2051PC/2074C/2078C, please note that this product comes in three
kinds of packages: “Storage Controller Only”, “Complete Backup System” and “Backup System
Without DVD/CD Burners”.
9
2.1 Stand-alone Duplicator Controller
Open package to check for any problems.
Provide DVD-ROM drive (Copy Mode).
Provide 1~8 DVD Writers.
Provide a 3.5”or 2.5” SATA HDD (optional).
2.2 Complete Duplication System
Open package to check for any problems.
Provide a 3.5” or 2.5” SATA HDD (optional).
Check that the PSU provides enough wattage.
2.3 Duplication System with no DVD Writer
Open package to check for any problems.
Provide DVD-ROM drive (Copy Mode).
Provide 1~8 DVD Writers.
Provide a 3.5” or 2.5” SATA HDD (optional).
Check that the PSU provides enough wattage.
ARS-2051PC/2074C/2078C Manual

2.4 Installing the ARS-2051PC
The following block diagram and pictures show the connection of the ARS-2051PC to a DVD-
ROM, a SATA hard drive, and 1~2 DVD burners.
10
ARS-2051PCLCD
SATA HDD or
DVD-ROM CN13
(upper level)
DVD-Writer
DVD-WriterDVD-Writer
SATA
power
port
DVD-Writer
(Flash Copier)
SATA HDD or DVD-ROM (upper level)
DVD-Writer (bottom level)
(DVD Copier)
CN13
(bottom level)
Attention: When connecting SATA cable to the port, plug it in till you hear a click. To unplug the
SATA cable, press the latch and remove it. (Do not force to remove the cable.)
DVD Copier Flash Copier
ARS-2051PC/2074C/2078C Manual

2.5 Installing the ARS-2074C
The following block diagram and pictures show the connection of the ARS-2074C to a DVD-ROM,
a SATA hard drive, and 2~4 DVD burners.
ARS-2074C
LCD
DVD-ROM
SATA HDD
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
Attention: When connecting SATA cable to the port, plug it in till you hear a click. To unplug the
SATA cable, press the latch and remove it. (Do not force to remove the cable.)
DVD Copier Flash Copier
CN13 (upper level)
CN13 (bottom level)
CN14 (upper level)
CN14 (bottom level)
SATA
power
port
DVD-Writer
(Flash Copier)
SATA HDD (upper level)
DVD-ROM (bottom level)
(DVD Copier)
DVD-Writer
(DVD Copier)
11
ARS-2051PC/2074C/2078C Manual

2.6 Installing the ARS-2078C
The following block diagram and pictures show the connection of the ARS-2078C to a DVD-ROM,
a SATA hard drive, and 6~8 DVD burners.
Attention: When connecting SATA cable to the port, plug it in till you hear a click. To unplug the
SATA cable, press the latch and remove it. (Do not force to remove the cable.)
ARS-2078C
LCD
DVD-ROM
SATA HDD
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD-Writer
DVD Copier Flash Copier
CN15 (upper level)
CN15 (bottom level)
CN16 (upper level)
CN16 (bottom level)
CN13 (upper level)
CN13 (bottom level)
CN14 (upper level)
CN14 (bottom level)
SATA
power
port
DVD-Writer
(Flash Copier)
SATA HDD (upper level)
DVD-ROM (bottom level)
(DVD Copier)
DVD-Writer
(DVD Copier)
12
ARS-2051PC/2074C/2078C Manual

Chapter 3 Basic Operations
3.1 The Keypad and LCD
There are 6 keys and one LCD on the panel of the ARS-2051PC/2074C/2078C duplicator
controller.
3.2 Installing the hard drive for DVD Copier
An internal hard drive is not required for all system operations. However, the Image function is
available only when a hard drive is attached. With the Image function, additional sources – the
image files in the hard drive – can be used for DVD/CD copying. The following two sections are
brief operational procedures for the systems with and without an internal hard drive.
13
1. It shows a function or a message.
2. It’s used to scroll up function menus.
3. It’s used to scroll down function menus.
4. It’s used to execute a function.
5. It’s used to cancel a function.
6. It's a quick launch to copy.
7. It's a quick launch to change mode.
3.2.1 With an Internal Hard Drive
When a 3.5-inch SATA hard drive is connected to the ARS-2051PC/2074C/2078C, please follow
the operational procedures below:
You can check if the hard drive is detected by the ARS-2051PC/2074C/2078C through the
device information, function list no. 12-12. If a hard drive is detected and correctly recognized by
the ARS-2051PC/2074C/2078C, the CH0 in the device information will be HDD. Before any
operation, the hard drive has to be formatted. You can format the hard drive through the 13-04
function.
Set the hard drive as the source through the 8 function (Select Source).
Choose a partition for data storage through the 9 function, “Image”.
If the selected partition is empty, insert a DVD/CD to the DVD-ROM and choose the 9-01
function, “Load”. Press ENT to back up the DVD/CD to the selected partition. Different data
should be stored in different partitions.
Exit the menu by pressing ESC and switch to the first function, “Copy”, by pressing ▲or ▼.
Insert a blank DVD/CD into the DVD burner and press ENT to start copying.
Upon completion of data copying, the successfully duplicated DVD/CD will be ejected
automatically. The default setting is automatic ejection and it can be changed.
1 2 47 6
Status LED
5
3
ARS-2051PC/2074C/2078C Manual

The failed DVD/CD will be held in the DVD burner. The default setting keeps the failed DVD/CD
in the burner and it can be changed. To eject the failed DVD/CD, you have to press the eject key
on the DVD burner.
Do not press any key during the copying process. Abrupt interruption may damage the system
and the DVD/CD.
3.3.2 Without an Internal Hard Drive
When a 3.5-inch SATA hard drive is not connected to the ARS-2051PC/2074C/2078C, please
follow the operational procedures below:
14
Insert a source DVD/CD into the DVD burner.
Switch the first function, “Copy” by pressing ▲or ▼. Insert a blank DVD/CD into the DVD burner
and press ENT to start copying.
Upon completion of data copying, the successfully duplicated DVD/CD will be ejected
automatically. The default setting is automatic ejection and it can be changed.
The failed DVD/CD will be held in the DVD burner. The default setting keeps the failed DVD/CD
in the burner and it can be changed. To eject the failed DVD/CD, you have to press the eject key
on the DVD burner.
Before installing any hardware, please check the SATA cable first.
Connect to
ARS-2051PC/2074C/2078C
SATA port
Connect to SATA port of
SATA HDD/DVD-ROM/DVD writer
30cm
Connect to
ARS-2078C SATA port
Connect to SATA port of
SATA HDD/DVD-ROM/DVD writer
70cm
Please check that the SATA cable is properly connected before installing the hardware.
The SATA HDD can be connected directly to the SATA port on the ARS-2051PC/2074C/2078C
board via the SATA cable.
Connect to
ARS-2074C SATA port
Connect to SATA port of
SATA HDD/DVD-ROM/DVD writer
50cm
Attention: When connecting SATA cable to the port, plug it in till you hear a click. To unplug the
SATA cable, press the latch and remove it. (Do not force to remove the cable.)
ARS-2051PC/2074C/2078C Manual

Chapter 4 PCB Layout
The layout of the ARS-2051PC is shown below:
CN24: SATA power port
CN13: The target DVD-Writer (Flash Copier)
CN13 (upper leverl): The source SATA HDD or source DVD-ROM (DVD Copier)
CN13 (bottom leverl): The target DVD-Writer (DVD Copier)
CN1: USB signal link (connects with ARS-4420S)
15
CN13
CN1
Red
ARS-2051PC/2074C/2078C Manual
MS SD CF USB
CN24

The layout of the ARS-2074C is shown below:
CN24: SATA power port
CN13 & CN14: The target DVD-Writer (Flash Copier)
CN13 (upper leverl): The source SATA HDD (DVD Copier)
CN13 (bottom leverl): The source DVD-ROM (DVD Copier)
CN14: The target DVD-Writer (DVD Copier)
CN1: USB signal link (connects with ARS-4420S)
CN14 CN13
CN1
Red
16
ARS-2051PC/2074C/2078C Manual
MS SD CF USB
CN24

The layout of the ARS-2078C is shown below:
CN24: SATA power port
CN13 & CN14 & CN15 & CN16: The target DVD-Writer (Flash Copier)
CN15 (upper leverl): The source SATA HDD (DVD Copier)
CN15 (bottom leverl): The source DVD-ROM (DVD Copier)
CN13 & CN14 & CN16: The target DVD-Writer (DVD Copier)
CN1: USB signal link (connects with ARS-4420S)
CN14 CN13 CN16 CN15
CN1
Red
17
ARS-2051PC/2074C/2078C Manual
MS SD CF USB
CN24

Chapter 5 Operational Functions
The ARS-2051PC/2074C/2078C has two operational modes: Flash Copier and DVD Copier (The
default setting is Flash Copier.). Users can select the operational mode through the “Model Select”
function.
5.1 Flash Copier
There are 9 major functions in the duplicator controller as the following figure shows, and there are
subfunctions in Function 9 as the following figures show.
18
1. Mem.Card Copy
2. Verify
3. Compare
4. Mem.Card Info
5. Disc Info
6. Restore Card
7. Erase Disc
8. Model Select
Duplicator controller
9. Setup
9-01. Language
9-02. Burn Speed
9-03. Eject Disc
9-04. Multi-Session
9-05. Button Sound
9-06. Device Info
9-07. System Info
9-08. Update Firmware
9. Setup
9-09. Compare Firmware
In Function 9 there are 9 subfunctions.
ARS-2051PC/2074C/2078C Manual