ACASIS EC-7352 User manual

3.5 Inch Dual Disk Hard Disk Array Box
User Manual
Foreword
Dear user, thank you for purchasing Acasis product. In order for you to have a better
understanding of the product, please read this manual carefully before use. I wish you a
pleasant experience!
Package Contents
3.5-inch dual-bay hard disk array*1
12V/3A power adapter*1
USB data cable*1
Installation screw package*1
User manual (including warranty card)*1
Install screwdriver*1
Precautions
All data will be deleted when setting RAID modes, please backup your data
first!
Disconnect the device only after unmounting the hard disk drive from the computer
safely, incorrect using may cause damage and permanent loss of data.
ACASIS is not responsible for any damage to the hard disk drive or data loss
caused by improper use.
Functional Interface
①Hard disk indicator*2
⑥DIP button
②Screw fixing port*2
⑦Power interface
③Portable Carrier
⑧Computer interface
④HDD 2 interface
⑨Switch button
⑤HDD 1 interface
⑩Power Indicator

1.Unpack, take out the 2.Align the HDD for installation
internal hard disk cart slot Install the hard disk on the
interface and fix it
3.According to user needs to 4.Insert the installed hard
adjust the DIP switch, the factory disk into the hard disk box,
setting is Double hard disk JBOD and fix it with screws
mode setting
Kind tips
1. Please install HDD1 and HDD2 hard disks correctly;
2. According to the needs of users, adjust the correct dialing method;
3. When using the product, it must be connected to the power supply before it can be used.
Notice
All data will be deleted when setting RAID modes, please backup your data first!
After setting RAID mode, please get into Storage Disk Management to initialize
and format the drive, then all data of two drives will be deleted, please backup your
data first.
This product is compatible with 3.5-inch SATA hard drives and SSD with standard
SATA interface. If you use a 2.5-inchhard drive, an additional adapter rack is
required.
A single disk supports a maximum of 18TB.
When using a brand new hard disk,it must be initialized and formatted to be
recognizable.
After setting up RAID mode, the hard disk must be formatted to be recognizable.
The disassembled hard disk may cause path conflict, and you need to reassign the
access path to identify it.
Resetting RAID mode will cause the data to be cleared.
Product Features
USB 3.0 port with up to 5Gbps transfer speed
Support Dual SATA 3.5" HDD(2.5” hard disk needs to be equipped with an
adapter bracket, not included)
Support Mode Raid 0/Raid 1/SPAN/JBOD
Support HDD Capacity up to 2 x 18TB
High-quality aluminum for optimal heat dissipation and structural integrity
Built-in 50mm fan for additional cooling power
LED light indicates Power and Activity status
Hot-swappable, plug and play, no drivers needed
System Requirements: Windows / Mac Os / Linux
Size:200*120*65mm
Product Warranty
The warranty period is 12 months from the date of purchase.
Limitation of Liability
In order to ensure the safety of your data, we recommend that you make regular data
backup.The company does not assume any responsibility for data loss caused by any
factor, and does not assume any compensation and data recovery obligations. If you start
to use this product, it means that you have understood and accepted the contents of this
manual.