AccessZone ® - GC500/GC600 Series – Installation Manual
All information is subject to chan e without notice. All other products and brand names are re istered trademarks of their respective companies 2011-03-21 US 1.05
Copyri
ht © 2005-2011 All ri
hts reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail
[email protected] Phone +45 25 12 84 02
6/7
4Wirin
The GC 00/GC600 series are equipped with a simple wiring scheme with a 2. meter, 8 cores wire:
Core Color
Signal name
Description
Caution
Be careful not to short the Oran e and Blue wire it may erase the firmware and a new firmware
upload is required
5Mountin
The GC 00/GC600 system can be mounted on any none metallic
1)
plane surfaces.
The system can be installed indoor and outside. It is advised to install the unit on the secured side
to prevent tampering and vandalism. The radio waves can penetrate most none metallic walls so it
is safe to install it on the inner side of the wall.
A typical installation is close to the door/gate in the same height as the user will carry the mobile
phone or other Bluetooth equipped device. However, it is possible to make a hidden installation
under none metallic ceilings due to the use of radio waves
2)
. The transmit power and detection
ran e may need adjust to compensate for the chosen installation. Please refer to the
GC 00/GC600 Series User Manual.
Make sure that the GC 00/GC600 system is firmly secured to the wall. Use appropriate plugs and
screws for wall mounting.
Do not expose the unit to heat.
Caution
1)
Metallic surfaces will reflect/prevent radiation of the radio waves used with Bluetooth. Keep a
good distance to metallic surfaces.
2)
Status LED’s are not visible
Black 0 V (GND)
Red 12 V DC Power Supply
Brown Input 1 (IN 1) Block Operation for preventing any door/gate activation
Green Input 2 (IN2) REX Button for easy exit and Alarm arming/disarming
Yellow Output 2 (OC2) Door lock/gate control
White Output 1 (OC1) Alarm arm/disarm or Light control switch
Blue RS232 TX
Oran e RS232 RX Firmware upgrade from PC