ATCOM AG-268 User manual

AG-268 SIP Gateway User Manual
AG-268 SIP Gateway User Manual
1．AG-268 SIP Gateway Features...................................................................................3
1.1 Product Appearance............................................................................................ 3
1.2 Backside Illustration ........................................................................................... 3
1.3 Electric Character................................................................................................ 4
1.4 Software.............................................................................................................. 4
1.5 Protocol and standard.......................................................................................... 4
1.6 Interface features................................................................................................. 4
1.7 operating environment........................................................................................ 4
1.8 Packaging............................................................................................................ 5
1.9 Installations......................................................................................................... 5
2．Settings .........................................................................................................................6
2.1 Home................................................................................................................... 6
2.2.1 WAN status......................................................................................................................7
2.2.2 WAN settings ...................................................................................................................8
2.2.3 WAN PPPoE Configuration............................................................................................9
2.2.3 MAC Spoofing Configuration .......................................................................................10
2.3 LAN .................................................................................................................. 11
2.3.1 LAN status..................................................................................................................... 11
2.3.2 LAN settings..................................................................................................................12
2.3.3 DHCP............................................................................................................................13
2.3.4 Port forwarding.............................................................................................................14
2.4 SIP..................................................................................................................... 15
2.4.1 SIP server Configuration ..............................................................................................15
2.4.2 Extensions .....................................................................................................................16
2.4.3 User1 Configuration(User2 is the same as User1).......................................................17
2.4.4 OOB Signalling.............................................................................................................19
2.4.5 ToS/DiffServ ..................................................................................................................20
2.4.6 Tone...............................................................................................................................21
2.4.7 Ring...............................................................................................................................22
2.4.8 Service Code .................................................................................................................23
2.5 CODECS........................................................................................................... 24
2.6 System............................................................................................................... 25
2.6.1 Security,Timeout............................................................................................................25
Page 1 of 37

AG-268 SIP Gateway User Manual
2.6.2 Localization...................................................................................................................26
2.6.3 Handset .........................................................................................................................27
2.6.4 SNMP Configuration.....................................................................................................28
2.7 Download.......................................................................................................... 29
2.7.1 Download......................................................................................................................29
2.8 Configuration.................................................................................................... 30
2.8.1 Backup and restore settings...........................................................................................30
2.9 Reset.................................................................................................................. 31
3．Restore to factory default..........................................................................................32
4．FAQ .......................................................................................................................33
Q1 What is the default account ofAG-268?........................................................... 33
Q2 How to use the IVR function of AG-268? ........................................................ 33
Q3 How can I know the IP address of AG-268?..................................................... 34
Q4 How to update AG-268 firmware?.................................................................... 35
Q5 How to use dial plan?........................................................................................ 35
Q6 How to use the value add service of AG-268?.................................................. 36
Q7 How to configure AG-268?............................................................................... 37
Q8 How to change AG-268 LAN port MAC address?........................................... 37
Q9 Why does my AG-268 always drop off from the server? ................................. 38
Q10 How to use the speed dial function?................................................................ 38
Page 2 of 37

AG-268 SIP Gateway User Manual
1．AG-268 SIP Gateway Features
1.1 Product Appearance
1. PWR: power status led.
2. SYS: Not registered in sip sever , flash 1 second and light 5
seconds ；registered, light off
3. WAN: WAN port status led
4. LAN: LAN port status led
5. TEL2: Telephone status.
6. TEL1: Telephone status.
1.2 Backside Illustration
1. PWR: Power Jack, 12V, 800mA
2. Reset: Please refer to “restore_to_factory_default” for the usage of this
button
3. WAN: 10M/100M auto-negotiation, factory default is set to DHCP.
4. LAN: 10M/100M auto-negotiation, initial IP is 192.168.1.1，and
enable DHCP service.
5. TEL1: telephone1 interface.
6. TEL2: telephone2 interface.
Page 3 of 37

AG-268 SIP Gateway User Manual
1.3 Electric Character
zPower adapter: 12V 800mA DC output
zNetwork interface: 2 x RJ-45 Ethernet Connectors
zFXS: 2 x FXS ports
1.4 Software
zNAT supported
zDHCP support for LAN or Cable modem
zPPPoE support for ADSL or Cable modem
zConfigured by HTTP web browser
zSupport HTTP, TFTP upgrade.
zSupport major G.7XX (G711,G729,G723,G726) Codec
zDynamic voice jitter buffer, CNG (Comfort noise generation),VAD
zG.165 compliant 16ms echo cancellation
zTone generation and Local DTMF re-generation according with ITU-T
zE.164 dial plan and customized dial rules
zSupport T30/T38 FAX
zSupport adjustable user password and super password
zIVR (Interactive Voice Response)
1.5 Protocol and standard
zIEEE 802.3 /802.3 u 10 Base T / 100Base TX
zMajor G.7XX;
zSIP RFC3261
zTCP/IP: Internet transfer and control protocol
zRTP: Real-time Transport Protocol
zRTCP: Real-time Control Protocol
zVAD/CNG save bandwidth
zTFTP: File Transfer protocol
zHTTP: Hyper Text Transfer protocol
1.6 Interface features
zWAN: 10M/100M auto-negotiation
zLAN: 10M/100M auto-negotiation
zFXS ports:
Line Feed Voltage: >=42V
Ring Voltage: >=45V.
Ring Current: >=30mA
1.7 operating environment
zOperation temperature: 0 to 50° C (32° to 122° F)
zStorage temperature: -30° to 65° C (-22° to 149° F)
Page 4 of 37

AG-268 SIP Gateway User Manual
zHumidity: 10 to 90% no dew.
1.8 Packaging
¾Size: 22.5cm×17.0cm×7.6cm
¾Packing list
9AG－268 gateway X 1
9Power adapter X 1
9CD X 1
1.9 Installations
Connect the AG-268 LAN port and you computer with the RJ45 cable, and
then change your computer IP to static 192.168.1.xxx or use dynamic obtain IP,
type 192.168.1.1 in your IE browser to access AG-268 and change its setting.
Page 5 of 37

AG-268 SIP Gateway User Manual
2．Settings
2.1 Home
1. System uptime: system running time
2. NTP time: NTP time and date
3. LAN IP Address: Gateway IP, factory default is192.168.1.1
4. MAC Address: Gateway MAC address，the same as LAN port
MAC address
5. Serial Number: device serial number
6. Security: password information
7. Application Code Version: firmware version
8. Downloader Code Version: downloader version
Page 6 of 37

AG-268 SIP Gateway User Manual
2.2 WAN
2.2.1 WAN status
1. Enable: Yes indicates Wan port is ready for use
2. Service: indicate use status of Wan port，”Route” or “Bridge”
3. Protocol: Ethernet
4. Interface status: UP or Down
5. Link Status: interface link mode
6. Dynamic IPAssignment: IP type
7. IP address: WAN port IP address
8. MAC Address: WAN port MAC address
9. Subnet Mask: WAN port Subnet Mask
10. Default Gateway: Upper Gateway IP
11. DNS Address: your local dynamic name server IP
12. Priority Tag: Priority Tag value encoded in the Ethernet header in
outgoing packets.
13. Broadcast limit:
14. Multicast limit:
Page 7 of 37

AG-268 SIP Gateway User Manual
2.2.2 WAN settings
1. Device Operation Mode: WAN port mode, alternative “Bridged” and
“DHCP”
2. Obtain WAN configuration dynamically: use dynamic ip in WAN port
3. Specify fixed WAN configuration: manually enter the WAN port network
settings such as IP address, IP netmask, IP gateway, IP DNS server.
4. Broadcast limit: the value specifies the maximum limit on the percentage
of broadcast packets which will be bridged to the destination interface (as
a percentage of the source side bandwidth)
5. Multicast limit: the value specifies the maximum limit on the percentage of
multicast packets which will be bridged to the destination interface (as a
percentage of the source side bandwidth)
Page 8 of 37

AG-268 SIP Gateway User Manual
2.2.3 WAN PPPoE Configuration
1. Enable PPPoE: use PPPoE to connect to the internet
2. Username&Password: PPP id and PPP pin from your ISP
3. Echo Timeout: The duration between PPP echo requests
sending to server.
4. Echo Count: The number of unanswered PPP echo
requests before PPP connection is closed.
Page 9 of 37

AG-268 SIP Gateway User Manual
2.2.3 MAC Spoofing Configuration
WAN MAC Address (Spoofed): you can change the WAN port IP address
here (not suggest)
Page 10 of 37

AG-268 SIP Gateway User Manual
2.3 LAN
2.3.1 LAN status
Interface Status：
1. Enable: Yes indicate LAN id ready for use
2. Protocol：Ethernet
3. Interface status:UP or Down
4. Link Status: link speed mode
Network Settings：
5. IP address: LAN port IP address,factory default is
192.168.0.1
6. MAC Address: LAN port MAC address
7. Subnet Mask: LAN port subnet mask
8. Default Gateway: default gate way IP
9. Domain Name: Domain
10. Priority Tag: Priority Tag value encoded in the
Ethernet header in outgoing packets.
Page 11 of 37

AG-268 SIP Gateway User Manual
2.3.2 LAN settings
1. IPAddress, Subnet Mask: LAN port network settings.
2. Multicast Limits: broadcast and multicast limitation.
3. PHY speed mode: LAN port speed mode.
Page 12 of 37

AG-268 SIP Gateway User Manual
2.3.3 DHCP
AG-268 router function setting.
Page 13 of 37

AG-268 SIP Gateway User Manual
2.3.4 Port forwarding
Port mapping settings.
Page 14 of 37

AG-268 SIP Gateway User Manual
2.4 SIP
2.4.1 SIP server Configuration
1. Primary Server: Primary Server, AG-268 will auto switch to
Secondary server if primary server is unavailable.
2. Secondary Server: secondary server (back up function)
3. Address: SIP server IP address
4. Port: SIP server port，the well know port is 5060
5. Domain Name: server domain
6. Send Registration Request with Expire Time：Register TTL (unit: seconds).
Indicate the register period, if AG-268 always log off after some time，please
set this time to a lower value.
7. Outbound Proxy IP: Outbound Proxy server IP address
8. Outbound Proxy Port: Outbound Proxy server port
RTP port Number Setting: RTP local port, the minimum value is 4
NAT Traversal
1. NONE: disable NAT traversal
2. UPnP: use UPnP，need the support of upper gateway
3. Stun Server IP: Fill in your stun server IP when using stun method
4. Stun Server Port: Fill in stun server port
Gateway Settings
Page 15 of 37

AG-268 SIP Gateway User Manual
1. Dial Plan: please refer to dial_plan
2. # use as a quick dial function: the number will send immediately after you
press the # button
3. To enable # to be recognized as dial number: use # as a dial number
4. * use as a quick dial function: the number will send immediately after you
press the * button
5. To enable * to be recognized as dial number: use * as a dial number
2.4.2 Extensions
SIP Extensions:
1. Support PRACK method with provisional response reliability: enable
SIP PRACK support
2. Encode SIP URI with user parameter: encode user=phone parameter in
SIP URI
3. Session Timer use UPDATE method: enable SIP session timer
function。
Page 16 of 37

AG-268 SIP Gateway User Manual
4. Enable Global Number support(E.164): enable E.164 support。
5. Call Hold using c=0.0.0.0 (RFC 2543) in SDP:using the call hold method
described in RFC 2543. If unchecked, the call hold would follow RFC
3263 method
6. Send NOTIFY for REFER request: send out NOTIFY request to
transfer for unattended and attended call transfer.
2.4.3 User1 Configuration(User2 is the same as User1)
Primary Server，Secondary Server
Phone Number: phone number.
CallerID Name: caller ID
Port Name: Local register port. (Note: please assign different port to
different user)
User Name: user name.
Password: password.
Line1 AEC Control: enable AEC (Acoustic Echo Cancellation) function, if
the other hear a significant echo, please check this option.
Line1 Gain Control:
Input Gain Control (-12 ~ 18) db: input volume control.
Output Gain Control (-12 ~ 18) db: output volume control.
Supplementary Service Subscription:
Enable Call Waiting (Reject second incoming call): enable call waiting.
Enable Caller ID: enable caller ID display.
Page 17 of 37

AG-268 SIP Gateway User Manual
Reject anonymous: reject anonymous call.
Block Caller ID in outgoing call: use anonymous Caller ID.
Distinctive Ring Settings: set distinctive ring to different user.
Speed Dial Setting: speed dial number setting.
Page 18 of 37

AG-268 SIP Gateway User Manual
2.4.4 OOB Signalling
This sub-page allows configuration of the out-of-band signaling options for SIP.
Select whether OOB telephone event signaling is to be done using the SIP INFO
message, or to be done via RFC2833 RTP signaling. For additional information
please refer RFC2833.
Page 19 of 37

AG-268 SIP Gateway User Manual
2.4.5 ToS/DiffServ
This sub-page is used to configure the Type-of-Service/Diffserv byte values which
are to be used in the IP header of all transmitted SIP signaling packets and RTP
packets. The ToS/DiffServ byte values are entered as two-digit hexadecimal
values. If no special ToS/DiffServ value is to be used for a particular traffic type,
enter “00” or leave the setting empty.
Press “Save ToS/DiffServ Settings” to save these new settings.
Page 20 of 37