Accurist IA04 Manual

Instruction Guide
and
2 year Guarantee
IA04
3 eye chronograph (1/10th sec)
with date
* Chronograph timing up to 60 minutes including
1/10th of a second.
* Instructions continued overleaf.
Water Resistance
If your watch is water resistant, it will clearly state “Water
Resistant” or have a static water pressure indication (e.g.
“30/50/100/200 metres”) on the dial and/or case back.
If it is not marked as water resistant, it should not be allowed
to come into contact with water or be worn in conditions
that could expose it to moisture (e.g. washing, heavy rain
etc.). Certain chemicals in water may damage the watch
seals. To maintain water resistance, we recommend that your
watch is serviced and re-sealed at least every 12 months by
T.P. (UK) Ltd.
IMPORTANT
Buttons must not be operated while in contact with water.
WATER RESISTANT or RESISTANT TO 30 METRES
Suitable for normal everyday use and will resist exposure to
splashes and rain; it is NOT designed to be used whilst bathing
or swimming.
WATER RESISTANT TO 50 METRES
As 30 metres plus bathing or swimming.
WATER RESISTANT TO 100 METRES
As 50 metres plus pool side diving and snorkelling, but not
high board or scuba diving.
WATER RESISTANT TO 200 METRES
As 100 metres plus scuba diving, but not high board diving.
Service and Repairs
Your ACCURIST watch is guaranteed against defects in mate-
rials and workmanship for a period of 2 years from the date of
purchase. During this period, we will exchange or repair, at our
discretion, any defective components free of charge.
IMPORTANT - Not covered by Guarantee
1. Batteries, straps and bracelets.
2. Damage caused by accident, misuse or lack of care.
3. Water penetrations except in watches marked as “Water
Resistant”.
SERVICING AND REPAIRS UNDER GUARANTEE
Please post your watch, together with the Retailer’s Sales Re-
ceipt or proof of purchase, the completed Guarantee slip, and
a brief note to explain the nature of the fault, by Registered
Post or Recorded Delivery to the address shown. Do not send
the presentation box as this will NOT be returned.
SERVICING AND REPAIRS OUTSIDE OF GUARANTEE
Available at a reasonable charge after an estimate has been
sent by T.P. (UK) Ltd. Send your watch to us by Registered
Post or Recorded Delivery to the address shown.
Important Note
It is important to identify your watch correctly. If, after reading
this Instruction Guide, you have any further questions regard-
ing the use, operation or adjustment of your watch, please call
T.P. (UK) Ltd., Alexander House, Chartwell Drive, Wigston,
Leicester LE18 2EZ
United Kingdom.
GUARANTEE
PLEASE USE BLOCK CAPITALS
NAME
ADDRESS
POST CODE
DAYTIME TELEPHONE NUMBER
IMPORTANT
This guarantee slip should be retained by the owner of
the product and should be sent to Time Products (UK)
Ltd. together with the product and £4.50 to cover the
handling and postage when service under Guarantee
is required.
A
B
1 2 3
SEC
1/10th
MIN

3 eye chronograph (1/10th sec)
with date
Using the stop watch/chronograph fea-
ture continued:
• Split time measurement:
1. Press ‘A’ to start the timing, then press ‘B’ to
split the timing.
2. Press ‘B’ to release the timing as many times
as required.
3. Press ‘A’ to stop the chronograph timing.
4. Press ‘B’ to reset the chronograph.
3 eye chronograph (1/10th sec)
with date
Using the stop watch/chronograph
feature:
* The chronograph measurement can time up to 60
minutes.
• Standard measurement:
1. Press ‘A’ to start the chronograph timing, then
press ‘A’ to stop the timing.
2. Press ‘B’ to reset the chronograph.
• Accumulated elapsed time measurement:
1. Press ‘A’ to start timing, then press ‘A’ to stop
the timing.
2. Restart the timing by pressing ‘A’ as many
times as required.
3. Press ‘A’ to stop the chronograph and ‘B’ to
reset.
3 eye chronograph (1/10th sec)
with date
Setting the time:
* The chronograph measurement must be stopped
before the time can be set.
1. Pull the crown out to position ‘2’.
2. Turn the crown clockwise until the previous
date is displayed.
3. Now pull the crown out to position ‘3’ and
adjust the hands to the desired time.
4. Push crown back to position ‘1’.
* Do not attempt to set the date between 9:00 PM
and 1:00 AM as the date change cycle is already in
progress.
GUARANTEE
DATE OF PURCHASE:
Retailers stamp if required or full name and address:
Please attach the receipt or proof of purchase; failure to
This Guarantee does not affect your statutory rights.
attach these may invalidate this Guarantee.
IA04/04-2015
3 eye chronograph (1/10th sec)
with date
Resetting the chronograph function:
• Before setting the time please check that all
chronograph hands are at the “0”/12 o’clock
position.
• To reset the hands to the “0”/12 o’clock
position press the buttons on your watch in the
following sequence:
1. If the chronograph is counting then press ‘A’
to stop the chronograph and then ‘B’ to reset
back to “0”.
2. If split timing is displayed then press ‘B’ then ‘A’
followed by ‘B’ again to reset.