Acer packardbell viseo 193ws User manual

Dear Customer,
Thank you for buying an AEG microwave oven and putting your trust in the
AEG brand name.
Before using your AEG microwave oven for the first time, please read the
instruction book thoroughly. This will enable you to take advantage of all the
features that the appliance offers. It will also ensure trouble-free operation
and minimize unnecessary service calls.
/\ Important information concerning your safety or the operation of your
( • N appliance is noted by this symbol and/or mentions words such as «Warning»,
«Take caret). Be sure to follow all instructions carefully.
Throughout the manual, this symbol guides you step by step when operating
the appliance.
rs-| This symbol indicates further information concerning the use of the
UJ appliance.
□ Bui The clover indicates energy-saving tips and hints for environmentally friendly
use of your appliance.
In the event of malfunctioning, please follow the instructions given in the
section «What to do if...»

CERTIFIED DIMENSION PRINT

Chapter 1: Whafs in This User Guide?
Chapter 2: Wi-Fi Phone Panels
Chapter 3: Installing and Using the Wi-Fi Phone
Inserting the Battery into the Wi-Fi Phone
Powering on the Wi-Fi Phone
Navigating the Wi-Fi Phone
Setting up the Wi-Fi Phone
Using the Wi-Fi Phone
Chapter 4: Configuring the Wi-Fi Phone
Instructions for Configuring the Wi-Fi Phone
Status Information
Howto Access the Web-based Utility
Settings of the Wi-Fi Phone
Chapter 5: For Administrators Only
Administrator Settings of the Wi-Fi Phone
Accessing the Web-based Utility
Protecting Administrator Access
Appendix A: Frequently Asked Questions
Appendix B: Glossary
Appendix C: FAQ

ProJet® x60 Pro Series User Guide
3
4
5
6
Routine Cleaning.
3.1 Vacuum Excess Core.....
3.2 Clean The Debris Separator.
3.3 Clean The Parking Caps.
3.4 Clean The Fast Axis Rails and Carriage. ..
3.5 Clean The Service Station.
3.5.1 Example - Dirty Service Station.
3.5.2 Example - Clean Service Station.
3.5.3 Cleaning Procedure.
Post-Processing.
4.1 Post-Processing Using Water Cure.
4.2 Post-Processing With ColorBond ™ .
4.3 Post-Processing With StrengthMax ™ .
Additional Operations.
5.1 The Printer Status Dialog.
5.1.1 Ready to Print.
5.1.2 Not Ready to Print .
5.2 Change Print Head(s).
5.3 Add Binder.
5.4 Adding Core to the Feeder.
5.5 Add Cleaning Solution.
5.6 Replace the Waste Tray.
5.7 Position Build Piston (Build Bed).
5.8 Cover.
Printer Maintenance.
6.1 Fast Axis Bearing Lubrication.
6.2 Piston Screw Lubrication - ProJet 660Pro.
6.3 Piston Screw Lubrication - ProJet 860Pro.
6.4 Slow Axis Bearing Lubrication.
6.5 Clean The Alignment Sensor Window.
6.6 Clean The Fast Axis Pulleys.
6.7 Clean The Slow Axis Rails and Pulleys.
6.8 Clean The Spreader Roller.
6.9 Printer Storage Preparation.
26
26
26
28
31
36
36
. 36
.38
. 38
40
43
45
45
46
47
7 Troubleshooting the ProJet x60Pro.61
7.1 Try This First. 62
7.2 Problems Powering Up. 63
7.3 Print Head Errors/ Weak Parts. 64
7.3.1 Try This First. 64
7.4 Alignment Errors. 66
7.5 Motion Errors - Fast Axis. 67
7.6 Motion Errors - Slow Axis. 69
7.7 Network Errors - Cannot Connect to Printer. 71
7.8 Network Errors - Packet Timeout. 72
7.9 Part Quality Issues - General. f -T-Tr ■ finia'r-rwrT •r , r . - r-_72
All Rights Reserved
5/12/13
gggassss

0
p

OSD options
Please refer to "External Controls" on Page 6.
To adjust the OSD settings:
1. Press the MENU button to open the OSD main menu.
Warm (Reddish white)
Cool (Bluish white)
User : You can adjust the colors red, green and blue to the
intensity you desire.
clear and sharp.
akes the picture
Clock:
If there are any vertical stripes seen on the background of the
screen this renders them less noticeable by minimizing their size.
It also changes the size of the horizontal screen.
H-Position:
This adjusts the horizontal screen position.
This adjusts the vertical screen l position.

< a of id

Automatic Tuning of Channels
Automatic tuning of channels allows you to store each programme automatically.
Press button
I
<s>
<!>
<S>
©
PICTURE
Press button repeatedly until
PRESET menu is selected.
/ c- Press button repeatedly until
' Auto Store is selected.
(n &-
ED EDL |
Contrast
Bright.
Color
*1
i t <— ►
MENU
1 C3 d 1 -
□
Manua! Store
up
[t l OK
MENU
< 3 >
<S>
Start automatic
channels.
ling of
Press button to stop tuning.
Note: when thetuning is
completed,the menu will quit
automatically.
Manual Tuning of Channels
Manual tuning allows you to select your preferred channel number for every available programme.
H M | Press button
Result on screen
<0> ©
(1=1 CD j=ai1 |
^ Color Temp^

Adjusting the Monitor
A Look at the Control Panel
Adjusting the Monitor
You can adjust the monitor with the On-Screen Display (OSD) menus, There are 3
keys for user's control. They include i txq Adjust, and Power Switch. The
following is the introduction.
Panel key introduction
1. i (xy Intelligent key used for auto-cailibration of picture size and position.
2. Adjust : rotates or presses to make adjustments,
3. Power Switch: turns the monitor on or off
3-1 Adjusting the Monitor

Automatic Tur
Automatic tuning of channels allows you to store each programme automatically.
Step Press button Result on screen
Enter main menu.
nnri|:
SSs *^ Install is selected.
<^> Select Auto Store.
Start automatic tuning of
channels.
———
When tuning is completed,
n
13

Notes
12
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 70269701

Remote Control Layout
Refer to the "Turning the Projector On/Off" section.
To choose the desired aspect ratio (Auto/4:3/16:9).
Zooms the projector display in or out.
When a USB cable is connected, it performs the sa
function as the left mouse button.
RESYNC
/-\ Keystone
Automatically synchronizes the projector to the input
Adjusts image distortion caused by tilting projection
(±40 degrees).
▼ directional
select keys
keypad 0-9
Selects it< rr makes adjustments to your selection.
in the “Setting >
To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p),
and YCbCr (480i/576i).
To change source to Component video. This
connection supports YPbPr.

Submenu PROGRAM:
NEW - QUERY -CHANGE - DELETE - END

FAQ - Frequently
Asked Questions
6. Can I install Airfree in my walking closet ?
Yes, as long as it has at least 330cu.ft (10m 3 )*. Airfree should not be placed under
shelves or its efficiency will be reduced.
* as reference 330cu.ft (10m 3 ) is approximately 7’x7’
7. Can I use Airfree in air conditioned rooms?
Yes.
8. How do I know if Airfree is no longer working?
Check the top lid, if warm Airfree is working.
9. Can I place Airfree at the corridor to reach the whole house?
No. Airfree will just reduce air pollution in the corridor’s area.
10. Can I place Airfree in a closed room?
Yes. Please remember such a room must have at least 330cu.ft (10m3)*.
* as a reference 330cu.ft is approximately 7’x7’
11. Does Airfree eliminate bacteria and viruses?
Yes. Unlike the air filters in the market Airfree is more efficient with the
smallest microorganisms as they are easily carried by Airfree’s airflow into its
heated ceramic core.
12. Can I change Airfree from one room to another?
Airfree must always be plugged in the same room 24 hours a day. Airfree's
patented technology works gradually and cannot have its cycle interrupted.
Moving it from one room to another will interrupt the cycle and will recontaminate
the room. See question 13 bellow.
13. Should I turn off Airfree when I leave house?
No. Airfree must always be on.
14. What happens if Airfree is disconnected or there was a black out?
Airfree will take approximately the same time to recover the previous reduced
contamination level.
Hir nee

Mechanical Instructions

O*
U1