Acer XR342CK User manual

XR342CK

English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
7. In order to prevent damage to the LCD pannel, do not place the monitor face down on a surface.
Package contents
LCD
monitor
Power
Adapter
MHL cable
(optional)
HDMI
cable
(optional)
DP cable
(optional)
USB cable
(optional)
Quick start
guide
Wall
mount
BKT
Headset
hook
XR342CK
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and /or DP (optional) and /or MHL (optional) input socket of the
monitor, and the HDMI (optional) and /or DP (optional) and /or MHL (optional) output socket of the graphics card on
the computer. Then tighten the thumbscrews on the signal cable connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
DP
USB
MHL

English
1
2
3
4
5
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates
standby/ power saving mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom
color settings to the factory defaults.
3 Function key
/
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select
select scenario mode or game mode .
4 Function key
/
X
a. Press to view Main page.Press again to enter Input select
function.
b. When the Function Menu is active, this button will quit the OSD.
5 Function key
/
a. Press to view Main page.Press again to enter next function in
the Function Menu.
b. The single toggle button on the backside of the Display bezel
operates like a joystick. To move the cursor, simply toggle the
button in four directions. Press the button to select desired option.
Red indicates operable. Grey indicates inoperable.
AdaptiveSync:
It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh
ratebasedontypicalcontentframeratesforpowerefcient,virtuallystutterfreeandlow-
latency display update.
DTS Sound:
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS Sound is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.

English
Adjusting the OSD settings
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: Thefollowingcontentisforgeneralreferenceonly.Actualproductspecicationsmayvary.
The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU
key to open the OSD. You can use the OSD to adjust the picture quality and general settings. For
advanced settings, please refer to following page:
Main page
Game mode
Acon
Brightness
80
Input
MHL
Menu
1. Hot Key1 (Modes, Brightness, Input, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
2. Hot Key2 (Modes, Brightness, Input, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
3. Input selection
4. Menu OSD
Hot key1 (default: Game mode)
Tochoosegamemode(G1,G2,G3)whichuser-denedproletouseorscenariomode(User,Standard,
ECO, Graphics, Movie)
Acon Racing Sports User
Movie
Graphics
ECO
Standard
Modes
OK
Move
Hot key2 (default: Brightness)
Open the Brightness control and select your preferred brightness setting . When you are done, press the
joystick to quit current page and store.
Brightness
80
OK
Adjust

English
Selecting the input
Open the Input control and select HDMI2.0, HDMI (MHL2.1) or DP In, Mini DP or Auto Source. When you
are done, press the joystick to exit current page and store.
Input
Input
HDMI2.0
Auto Source
Off
Enter
Move
The Function page
Open the Function page to adjust the functions, settings which you want using the arrows. When you are
done, toggle the joystick to the left or right to go back one level or use
X
to exit current page and
store.
Picture
Game Mode - User
80
50
Off
Off
Off
Color
Audio
Gaming
OSD
System
Brightness
Contrast
Blue Light
ACM
Super Sharpness
Picture
Save seng to...
Enter
Move
9
Black Boost
X
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue Light, ACM
and Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: Sets the degree of difference between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: If the image is very bright or has few shadow areas, adjusting this setting may not result in
any noticeable changes to the image.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is shown --
80%, 70%, 60%, or 50%.

English
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: Higher values allow more blue light through. For the best protection select a lower value.
9. ACM: Turn ACM on or off. The default is off.
10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can simulate
high-resolution images by boosting the pixel density of the original source to make images sharper
and clearer.
Color
Game Mode - User
2.2
User
Audio
Gaming
OSD
System
Gamma
Colour Temp
R Gain
G Gain
B Gain
Picture
Color
50
50
50
X
Save seng to...
Enter
Move
Game Mode - User
Off
Audio
Gaming
OSD
System
Picture
Color
sRGB Mode
6-axis Saturate
X
Enter
Move
R Bias
G Bias
B Bias 50
50
50
6-axis Hue
Save seng to...
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for
Windows).
5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or User.
6. sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral devices,
such as printers and digital cameras.
7. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
8. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
Audio
Game Mode - User
0
On
Gaming
OSD
System
DTS
Picture
Color
Volume
Audio
X
Save seng to...
Enter
Move

English
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. DTS: Turn DTS Sound On or Off. Your monitor is equipped with two 7W speakers on the rear. DTS
Soundisstratiedandcreatesaremarkablesonicow.
Gaming
Game Mode - User
OSD
System
Picture
Color
Over Drive
Audio
Normal
Off
Aim point
Gaming
Save seng to...
Enter
Move
X
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. OD: Select Off, Normal, or Extreme.
5. Aim point: Show an Aim point on the screen for shooting games.
OSD
Game Mode - User
120
English
Gaming
System
OSD Timeout
Picture
Color
Language
Audio
OSD
Off
Off
Transparency
Refresh rate num
Save seng to...
Enter
Move
X
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency can be 0%
(OFF), 20%, 40%, 60%, or 80%.
7. Refresh rate num: Display the panel’s current refresh rate on the screen.

English
System
Game Mode - User
MHL
Gaming
Ambient Light
Picture
Color
Input
Audio
OSD Full
DP 1.2
Hot Key Assignment
DP Format
System
Wide Mode
PIP/PBP
X
Enter
Move
Clone
Daisy Chian
Off
Auto Source
Game Mode - User
Gaming
Picture
Color
DDC/CI
Audio
OSD
Off
Power-off
USB Charge
System
X
Enter
Move
Off
Quick start mode
Nomal
HDMI Black Level
On
Save seng to...
Save seng to...
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Input: Select the source from DP In, HDMI 2.0,HDMI(MHL),or miniDP.
5. Auto Source:The default is “On”, can support auto search for signal source in order.
6. Daisy Chain: Default is extend, can select daisy chain function extend or clone. Clone Mode is not
supported with Adaptive-Sync
7. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, and 1:1.
9. PIP/PBP settings
10. Ambient light: Adjust the lighting effects, color, and style. When choosing lighting effects by MNT
Status, following colors will be shown:
White: Normal mode.
Red: Adaptive-Sync mode.
11. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Input, Volume, Gamma,
Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes, Brightness, Input, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
12. DDC/CI: Allows the monitor settings to be set through the software on the PC.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls
to be sent via software.
13. HDMI Black level setting
14. Quick start mode: Select Off or On. Turn on to speed up boot speed.
15. Power-off USB charge: Turn On or Off.

English
Save Setting to…(User mode only)
Game Mode - User
Gaming
System
Game Mode Racng
Picture
Color
Game Mode Acon
Audio
OSD
Game Mode Sport
Enter
Move
X
Save seng to...
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. SaveSettingtoGamemode:Therearethreeuser-denedprolesavailable.Whenyouhave
decided what settings suit you, save them and system will be able to recall the settings in the future
when you turn on gaming mode .

English
Standard timing table
VESA MODE
MODE Resolution
1 VGA 640x480 60Hz
2 VGA 640x480 75Hz
3 SVGA 800x600 56Hz
4 SVGA 800x600 60Hz
5 SVGA 800x600 75Hz
6 SVGA 832x624 75Hz
7 XGA 1024x768 60Hz
8 XGA 1024x768 75Hz
9 XGA 1152x870 75Hz
10 XGA 1280x960 60Hz
11 XGA 1280x720 60Hz
12 SXGA 1280x1024 75Hz
13 WXGA 1280x800 60Hz
14 WXGA 1360x768 60Hz
15 WXGA+ 1440x900 60Hz
16 WSXGA+ 1680x1050 60Hz
17 WUXGA 1920x1080 60Hz
18 WFHD 2560x1080 ①60Hz
19 UHD 3440x1440 ②30Hz
20 UHD 3440x1440 ③60Hz
21 UHD 3440x1440 ④75Hz
①DisplayPort /HDMI only
②HDMI only
③/④DP DisplayPort only
IBM MODE
MODE Resolution
1 DOS 720x400 70Hz
MAC MODE
MODE Resolution
1 VGA 640x480 67Hz

English
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Onlyperipherals(input/outputdevices,terminals,printers,etc.)certiedtocomplywiththeClassB
limitsmaybeattachedtothisequipment.Operationwithnon-certiedperipheralsislikelytoresultin
interference to radio and TV reception.
Caution
Changesormodicationsnotexpresslyapprovedbythemanufacturercouldvoidtheuserauthority,
which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Notice: Canadian users
CANICES-3(B)/NMB-3(B)
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information ab ut where you can drop off your
wasteequipmentforrecycling,pleasecontactyourlocalcityofce,yourhousehold
waste disposal service or the shop where you purchased the product.

English
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size 34 "W (87cm)
Pixel pitch 0.233mm(H) x 0.233mm(V)
Brightness 300cd/m2(Typical)
Contrast 100,000,000:1Max. (ACM)
Viewable angle (Typical) 172° (H) 178° (V) (CR≥10)
Response time 5ms (GTG,Typical)
Panel Type In-Plane Switching
Video Digital Interface
H-Frequency 30K-120KHz( HDMI)/120-120KHz (DP)
V-Frequency 48-75Hz(HDMI&DP)
Display Colors 1.07B Colors
Dot Clock 600MHz
Max. Resolution 3440x1440 @75Hz
Plug & Play VESA DDCCI/DDC2B
EnergyEfciencyClass C
*Annual Energy Consumption(Typical) 92 (kWh) (for HDMI-input Model)
Power consumption
@200cd/m2
ON Mode 51W(typ.)
Sleep Mode 0.5W(typ.)
Off 0.48W(typ.)
Input Connector
DP (Only DP Model)
Mini DP (Only Mini DP Model)
MHL 2.1 (Only MHL 2.1 Model)
HDMI 2.0(Only HDMI 2.0 model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal DP signal(Only DP-Input Model)
HDMI signal(Only HDMI-Input Model)
Speakers(Typical) 7W x 2
Maximum Screen Size Horizontal:799.8mm
Vertical:334.8mm
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
Dimensions 816.8 (W) x 461.77(H) x 308.97(D)mm
Weight (N. W.) 9.7kg Unit (net)
Mechanism spec
Tilt: -5° to +35°
Swivel: -30° to +30°
Height adjustment: 130mm
Pivot: No
Detachable foot stand: Yes
External
Controls: Functions
Brightness
Contrast
Black Boost
Blue Light
ACM
Super Sharpness
Gamma
Colour Temp
sRGB mode
6-axis Hue
6-axis Saturate
Volume
DTS
Over Drive
Aim point
Language
OSD Timeout
Transparency
Refresh rate num
Input
Auto Source
Daisy Chain
DP Format
Wide Mode
PIP/PBP
Ambient Light
Hot Key Assignment
DDC/CI
HDMI Black level
Quick start mode
Power-off USB charge
Game mode
*Allspecicationsaresubjecttochangewithoutnotice.
Regulatory Compliance
S&E
FindmanualsandotherdocumentsforyourAcerproductontheofcialAcersupportwebsite.

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Conformiteitverklaring
Wij,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
En,
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI) Italië
Tel: [phone], Fax: [phone]
www.acer.it
Product: LCD-monitor
Handelsnaam:
Modelnummer:
SKU-nummer:
(“x” = 0~9, a ~ z, A ~ Z, of leeg)
Wij, Acer Incorporated, verklaren hierbij onder exclusieve verantwoordelijkheid dat het hierboven
beschreven product voldoet aan de relevante wetten op harmonisering in de Unie zoals in de onderstaande
Richtlijn en dat de geharmoniseerde normen en/of andere relevante standaarden werden toegepast:
EMC-richtlijn: 2014/30/EU
EN 55022:2010+AC:2011 Klasse B
EN 61000-3-2:2006+A2:2009 Klasse D
EN 55024:2010
EN 61000-3-3:2013
LVD-richtlijn: 2014/35/EU
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
RoHS-richtlijn: 2011/65/EU
EN 50581:2012
ErP-richtlijn: 2009/125/EG
Verordening (EG) nr. 1275/ 2008; EN 50564:2011
Jaar om de CE-markering te beginnen aanbrengen: 2016.
_______________________________
RU Jan / Sr. Manager Date
Acer Incorporated (Taipei, Taiwan)
XR342CK
XR342CK xxxxxx;
Acer
Feb.15,2016

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
And,
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI) Italy
Tel: [phone] ,Fax: [phone]
www.acer.it
Product: LCD Monitor
Trade Name:
Model Number:
SKU Number:
(“x” = 0~9, a ~ z, A ~ Z, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in
conformity with the relevant Union harmonization legislations as below Directive and following harmonized
standards and/or other relevant standards have been applied:
EMC Directive: 2014/30/EU
EN 55022:2010+AC:2011 Class B
EN 61000-3-2:2006+A2:2009 Class D
EN 55024:2010
EN 61000-3-3:2013
LVD Directive: 2014/35/EU
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
RoHS Directive: 2011/65/EU
EN 50581:2012
ErP Directive: 2009/125/EC
Regulation (EC) No. 1275/ 2008; EN 50564:2011
Year to begin affixing CE marking: 2016.
_______________________________
RU Jan / Sr. Manager
Date
Acer Incorporated (Taipei, Taiwan)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Déclaration de conformité
Nous,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Et,
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho(MI), Italie
Tél : [phone], Fax : [phone]
www.acer.it
Produit :
Moniteur LCD
Nom commercial :
Numéro de modèle :
Numéro SKU :
(“x” = 0~9, a ~ z, A ~ Z, ou blanc)
Nous, Acer Incorporated, déclarons par la présente, sous notre seule responsabilité, que le produit décrit ci-
dessus est conforme aux législations d'harmonisation pertinentes de l'Union comme la directive ci-dessous,
et que les normes harmonisées suivantes et / ou d'autres normes pertinentes ont été appliquées :
Directive CEM : 2014/30/UE
EN 55022:2010+AC:2011 Classe B
EN 61000-3-2:2006+A2:2009 Classe D
EN 55024:2010
EN 61000-3-3:2013
Directive LVD : 2014/35/UE
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
Directive RoHS : 2011/65/UE
EN 50581:2012
Directive ErP : 2009/125/CE
Règlementation (CE) n° 1275/2008; EN 50564:2011
Année de début concernant l'apposition du marquage CE : 2016.
_______________________________
RU Jan / Dirigean
Date
Acer Incorporated (Taipei, Taiwan)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Konformitätserklärung
Wir,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan,
Und
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI), Italien
Tel.: [phone], Fax: [phone]
www.acer.it
Produkt: LCD-Monitor
Handelsbezeichnung:
Modellnummer:
Artikelnummer:
(„x“ = 0 bis 9, a bis z, A bis Z oder Leerzeichen)
Wir, Acer Incorporated, erklären hiermit in alleiniger Verantwortung, dass das oben beschriebene Produkt
mit den relevanten Angleichungsrechtsvorschriften der Union entsprechend der nachstehenden Richtlinie
übereinstimmt und folgende harmonisierte Standards und/oder anderen relevanten Standards angewandt
wurden:
EMV-Richtlinie: 2014/30/EU
EN 55022:2010+AC:2011 Class B
EN 61000-3-2:2006+A2:2009 Class D
EN 55024:2010
EN 61000-3-3:2013
LVD-Richtlinie: 2014/35/EU
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
RoHS-Richtlinie: 2011/65/EU
EN 50581:2012
Ökodesign-Richtlinie (ErP): 2009/125/EG
Verordnung (EG) Nr. 1275/ 2008; EN 50564:2011
Jahr, in dem mit der Anbringung der CE-Kennzeichnung begonnen wird: 2016.
_______________________________
RU Jan / leitender Manager Datum
Acer Incorporated (Taipeh, Taiwan)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Dichiarazione di conformità
Con la presente,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
E,
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI) Italy
Tel: [phone], Fax: [phone]
www.acer.it
Prodotto: Monitor LCD
Denominazione commerciale:
Numero modello:
Numero articolo (SKU):
(“x” = 0~9, a ~ z, A ~ Z, o spazio)
Acer Incorporated, dichiara sotto la propria responsabilità che il prodotto sopra descritto è conforme alle
pertinenti normative di armonizzazione dell'Unione, come le Direttive che seguono, e che sono state
applicate le seguenti norme armonizzate e/o altre norme pertinenti:
Direttiva EMC: 2014/30/UE
EN 55022:2010 + AC:2011 Classe B
EN 61000-3-2:2006 + A2:2009 Classe D
EN 55024:2010
EN 61000-3-3:2013
Direttiva LVD: 2014/35/EU
EN 60950-1:2006 / A11:2009 / A1:2010 / A12:2011 / A2:2013
Direttiva RoHS: 2011/65/UE
EN 50581:2012
Direttiva ErP: 2009/125/CE
Regolamento (CE) numero 1275/ 2008; EN 50564:2011
Anno per iniziare l'apposizione della marcatura CE: 2016.
_______________________________
RU Jan / Senior Manager Data
Acer Incorporated (Taipei, Taiwan)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Declaração de Conformidade
Nós,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
E,
Acer Italy s.r.l.
Viale De Gasperi 88/A, 20017 Mazzo di Rho(MI),Italy
Tel: [phone], Fax: [phone]
www.acer.it
Produto: Monitor LCD
Designação comercial:
Número do modelo:
Número SKU:
(“x” = 0~9, a ~ z, A ~ Z, ou espaço em branco)
Nós, Acer Incorporated, declaramos sob nossa exclusiva responsabilidade que o produto acima descrito está
em conformidade com a legislação de harmonização da União e que foram aplicadas as Diretivas e normas
indicadas abaixo e/ou outras normas relevantes:
Diretiva CEM: 2014/30/UE
EN 55022:2010+AC:2011 Classe B
EN 61000-3-2:2006+A2:2009 Classe D
EN 55024:2010
EN 61000-3-3:2013
Diretiva LVD: 2014/35/UE
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
Diretiva RSP: 2011/65/UE
EN 50581:2012
Diretiva ErP: 2009/125/CE
Regulamentação (CE) Nº. 1275/ 2008; EN 50564:2011
Ano para iniciar a utilização da marca CE: 2016.
_______________________________
RU Jan / Administrador Data
Acer Incorporated (Taipé, Taiwan)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwán
Declaración de conformidad
Nosotros,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwán
Y,
Acer Italy, S.R.L.
Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI) Italia
Tel: [phone], Fax: [phone]
www.acer.it
Producto: Monitor LCD
Nombre comercial:
Número de modelo:
Número de Referencia (SKU):
(“x” = 0~9, a ~ z, A ~ Z, o en blanco)
Nosotros, Acer Incorporated, por la presente declaramos bajo nuestra exclusiva responsabilidad que el
producto descrito anteriormente cumple con la normativa de armonización correspondiente en la Unión
Europea, la Directiva a continuación y las siguientes normas armonizadas y/o se han aplicado otras normas
pertinentes:
Directiva CEM: 2014/30/UE
EN 55022:2010+AC:2011 Clase B
EN 61000-3-2:2006+A2:2009 Clase D
EN 55024:2010
EN 61000-3-3:2013
Directiva de baja tensión: 2014/35/UE
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
Directiva RoHS: 2011/65/UE
EN 50581:2012
Directiva ErP: 2009/125/CE
Reglamento (CE) Nº 1275/ 2008; EN 50564:2011
Año para empezar a aplicar el marcado CE: 2016.
_______________________________
RU Jan / Administrador Superior Fecha
Acer Incorporated (Taipei, Taiwán)
Feb.15,2016
XR342CK
XR342CK xxxxxx;
Acer

Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product: LCD Monitor
Model Number: XR342CK
SKU Number: XR342CK xxxxxx
(“x” = 0~9, a ~ z, or A ~ Z)
Name of Responsible Party: Acer America Corporation
Address of Responsible
Party:
333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person: Acer Representative
Phone No.: 254‑298‑4000
Fax No.: 254‑298‑4147
Acer America Corporation
333 West San Carlos St., San Jose
Suite 1500
CA 95110, U. S. A.
Tel : [phone]
Fax : [phone]
www.acer.com