Acme Furniture 97787 User manual

SHOE CABINET
Width - 47.24"
Depth - 15.75"
Height - 50.08"
DIMENSIONS
MODEL#97787
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***

97787
PARTS LIST
X1 Top
A
X1 Left side
B
X1 Right side
C
X1 Bottom
D
X1 Middle
E
X1 Middle top
F
X1 Small left side
I
X1 Small right side
J
X4 Large layer
K
X4 Small layer
L
X1 Large door
O
X1 Drawer head
P
X1 Drawer right
R
X1 Drawer back
S
X1 Drawer left
Q
X1 Right back
U
X1 Left back
V
X1 Drawer bottom
T
X1 Large support
G
X1 Small support
H
X1 Left door
M
X1 Right door
N

HARDWARE LIST
Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled.
Carefully check parts and packing materials prior to ordering replacements.
Attention
X14
2Cam lock 15*12mm
1X14 Cam bolt 7*35*12.5mm
X8
3Dowel 8*30mm
4X4 Wood screw 8#*1-3/4"
X12
5Coarse screw 7*11*50mm
6X2 Slide rail 17*310mm
7X4 Wood screw #6*1/2"
X2
8Fixing screw M4*12mm
X32
9Shelf pin 4.9*16mm
X3
10 Handle
X6
11 Handle screw 7#*19mm
X6
12 Hinge ø26mm*3/8
X24
13 Hinge screw 6#*1/2"
X20
19 T-head screw 4*12mm
X8
14 Fixative plate
X8
15 Wood screw 3*19mm
X2
16 Dowel 8*20mm
X1
20 Adjustable leveler 24mm*1/4*12mm
X1
21 Glue
X1
22 Allen wrench
X4
17 Foot
X1
18 Support foot

ASSEMBLY INSTRUCTIONS
1
Step 1.
21
3
1
A
3
B
C

Step 2.
2
ASSEMBLY INSTRUCTIONS
6
7
2nd Hole
Push runner to see screw
holes on the other end.
Screw Hole
21
3
3
1
E
F
16 H
IJ

Step 3.
3
ASSEMBLY INSTRUCTIONS
hole usage
13
X6
O
10
11
12
M
N

Step 4.
4
ASSEMBLY INSTRUCTIONS
Insert in as arrow
direction to specify
21
3
Q
3
R
P
1
2
R
T
P
Q
4
S
R
Q

Step 5.
5
ASSEMBLY INSTRUCTIONS
2
5
F
I
J
Unfinished
G
I
J
21
3
2
B
F
G

Step 6.
6
ASSEMBLY INSTRUCTIONS
2
2
5E
F
C
E
H

Step 7.
7
ASSEMBLY INSTRUCTIONS
X4
19
19
B
CD
E
5
17
18
20
D

8
ASSEMBLY INSTRUCTIONS
X32
9
K
L
2
Step 8.
U
V
A
2
B
C
E

Step 9.
9
ASSEMBLY INSTRUCTIONS
hole usage
X6
13
Extend the two outer slides of the
runners so that they could align
with the sides of the drawer.
Make sure the pre-drilled holes
from the drawer align with the
screw holes of the outer slides.
Secure two screws from the
inside of the drawer using a
Phillips screwdriver to tighten
them to the outer slides.
O
M
N
P
8

Step 10.
10
ASSEMBLY IS COMPLETED.
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLY INSTRUCTIONS
15
14
X8
U
V