ACME 50660 User manual

ASSEMBLY INSTRUCTION FOR ACME FURNITURE
50660 /50661/50662
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may come loose inside the carton during shipment.
Identify and count all parts and metal hardware. Compare with the part list to be sure
all parts are present, If any part(s) are missing or damage, please contact your local
furniture dealer. For efficient and speedy service, please indicate the model number
and code letter of part(s) needed.
**Assemble the product on a flat, soft surface such a carpet or cloth to prevent
scratching the product finish. Read all instruction and study the drawing carefully before
starting the assembly process.
NO PART DECS QTY NO HARDWARE DECS QTY
A SEAT 1PC 1
Bolt
φ12*80mm
3PCS
B BACK 1PC
* DON'T TIGHTEN SCREW UNTIL COMPLETELY ASSEMBLED
STEP 1 STEP 2
Turn the sofa face down on a smooth, Please screw off the bolts
soft surface and unzip the black bottom from the wood frame underneath
fabric. the sofa with electric drill.
STEP 3
Please Pull Up the Backreset from the SEAT
PAGE 1/2
PART LIST
HARDWARE LIST

STEP 4
Please hang up the bracket on the backrest
into the bracket on the arm.
STEP5
Screw up three bolts into the wood frame underneath the sofa with electric drill.
STEP 6 STEP 7
Zipped up the black bottom fabric. Turn the sofa over and set up the cushion
and pillows.
Caution: Over tightening screw or bolts may cause damage.
It is suggested that two people work together for this assembly process.
PAGE 2/2