ACME Libby 92545 User manual

ITEM NO. 92545 DISPLAY RACK
A
B
C
LARGE SIDE PANEL
3PCS
SMALL SIDE PANEL
3PCS
WOOD SHELF
4PCS
1
2
3
BOLT 1/4" X 1/2"
6PCS
BOLT 1/4" X 1"
24PCS
ALLEN WRENCH
1PC
4
5
6
WALL ANCHOR
2PCS
L BRACKET
2PCS
SCREW
2PCS
7
PASTIC STRAP
2PCS
ASSEMBLY INSTRUCTIONS

*** Do not tighten screws & bolts until the entire unit is completely assembled. ***
STEP 1
Attach large side panel (A)
to small side panel (B) using
bolts (1) as shown.
There are total 3 pieces of
side panel.
STEP 2
Attach wood shelf (C) to
one large side panel (A)
using bolts (2) as shown.

STEP 3
Attach another large side
panel (A) to wood shelf (C)
using bolts (2).
STEP 4
Attach the large side panel
(A) to wood shelf (C) using
bolts (2).

STEP 5
Attach the wood shelf (C) to
the assembled unit using
bolts (2) as shown.
STEP 6
Attach the wood shelf (C) to
the assembled unit using
bolts (2) as shown.

STEP 7
Attach the wood shelf (C) to
the assembled unit using
bolts (2) as shown.
STEP 8
5
Select a location where you
want the shelf mounted. Mark
on the wall the two locations
where the wall anchors (4) will
be placed. Drill a hole for each
anchor slightly smaller than the
size of screws (6). Push the wall
anchors (4) as far as it will go
with your finger. Tap gently with
a hammer until the anchors are
in. Then align the L brackets (5)
to the wall anchors (4) and
insert screws (6) to secure.
Wall
20”
46”

STEP 9
Insert each end of the plastic
strap (7) into L brackets (5),
then secure and tighten.
Wall