Acnodes RP30173 User manual

RP30173
1U Military Rackmount Monitor Drawer
17.3" 1920 x 1080 Full HD LCD Monitor
MIL-STD-810G Military Testing Compliance
Industrial Monitors
All rights reserved. Product description and product specifications are subject to change without notice.
For latest product information, please visit Acnodes’ website at www.acnodes.com.
14628 Central Ave. Chino, CA 91710 Tel: [phone]
Fax: [phone]
© Copyright 2021 Acnodes Corp.
User Manual

< Part. 3 > PIN Assignment P.6
< Part. 2 > Dimensions
< Part. 1 > OSD Functions
1.1
1.2
1.3
1.4
Control Button
Input Source Selection
Key Operation
OSD Context
Contents
P.1
P.1
P.2
P.3
P.4-5

P. 1
< Part 1 > OSD Functions
< 1.1 > Control Button
RP-F117
Package Content
Structure Diagram & Dimension
a. Function:
Auto / Exit 1. Input signal Source Menu (See below 2.)
2. Jump out of Main Menu
Menu / Select Call up the Menu list (see below 3.)
On/ Off Screen On/Off
Increase (+) 1.Volume Increase(if speakers installed)
2.To the right direction (under Menu)
3.Increase (adjusting bar under sub-menu)
Decrease (-) 1.Volume Decrease(if speakers installed)
2.To the left direction (under Menu)
3.Decrease (adjusting bar under sub-menu)
After the input source is detected, the monitor will auto-searching the input source, it will take
10 - 15 sec. to show the screen automatically. Either or select the input signal manually shown
in below item 2.
< 1.2 > Input Source Selection
IMPORTANT NOTE:
*Products with both “HD-SDI” and “HDMI” inputs,
The “HD-SDI” input will be shown as“HDMI” in the source Menu,
The “HDMI ”input will be shown as “DVI” in the source Menu.
a. Press “On/Off” button, the LED indicator will lit up in Green.
b. Press“Auto/Exit” (The Source Menu will appear at down left corner).
c. Press “-” key to switch down the Input source in sequence.
d. Then press “+” key to confirm the selection.
AV
S-Video
DVI (HDMI)
HDMI (HD-SDI)
PC
b. Auto Searching
Input Source

< 1.3> Key Operation
Press “Menu/Select” button to call the main menu as below,
Figure 1 Main Menu
*Note: All Button Function In Main Menu
1. Under main menu screen, press “Increase” or “Decrease” button to switch between 4 top menu icons.
2. Under Main menu, press “Auto/Exit” button to down to sub-menu selection, and keep pressing the key to
jump to next sub-menu item.
In the sub-menu item, press “Menu/Select” to jump out to top Main Menu
3. Under the sub-menu item, press “Increase” or “Decrease” to adjust the strength.
4. In the main menu, press “Menu/Select” key to skip out of OSD screen. Press “Menu/Select” in the sub-
menu item could jump out to Main Menu.
P.2

P.3
Picture
Brightness :
Contrast :
Color Temp :
Auto :
Clock :
Phase :
Press Increase / Decrease to adjust the brightness
Press Increase / Decrease to adjust the contrast
Press Increase / Decrease to adjust the color temperature,
9300 inclines to blue, 6500 inclines to sunlight color, 5800
inclines to red color
Auto-adjustment
Adjust the screen frequency
Adjust the input phase level
A
< 1.4 > OSD Context
Audio < Audio SETUP >
Volume :
Mute :
Adjust the volume up/down
Mute the audio
B
COSD < OSD Menu >
Language :
H. Position :
V. Position :
H.Zoom :
V. Zoom :
Reset :
Default English (Others by request)
Adjust the video horizontal position
Adjust the video vertical position
Adjust the OSD horizontal position
Adjust the OSD vertical position
Reset to the factory setting
DPicture in Picture < PIP >
Multi Window :
Sub Source :
Size :
Position :
Black :
Sound Source :
1. Off 2.PIP 3.PNP,
Select the second input source
Screen size of second video input
(Three modes: small, medium, large)
Relative position of 2nd video input
(4 choices: up-right, down-right, up-left, down-left.)
Background color (Black , Blue)
Audio Input selection

P. 4
< Part 2 > Dimensions
Specications / OSD
Product Specications
Rear View Front View
Top View

P.5
Close View

P.6
< Part 3 > PIN Assignment
PIN Definition
Options
3G / HD / SD-SDI Broadcast-grade input
J1 Pin Assignment
J2 Pin Assignment