Acnodes APM 5064 User manual

APM5064
6.4 ” 640 x 480 TFT LCD
A l i m in u m F r o n t B e z e l
Panel/ V E S A M o u n t R e a d y
Industrial
Monitors
User Manual
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA91710 Tel: [phone] Fax: [phone]
© Copyright 2015 Acnodes Corp.

Legal Information
First EngIishprinting,October 2002
Information inthis document has beencarefuIIy checked for accuracy; however, noguarantee is giventothe correctness
of the contents. The information in this documentis subject to change without notice. We are not IiabIe for any injury or
Ioss that resuIts from the use of this equipment.
Safety Instru ctions
Please read all of these instructions carefully before you use thedevice. Save this manual for future reference.
●UnpIug equipment before cIeaning. Don’t use Iiquid orspray detergent; use a moist cIoth.
●Keep equipmentaway from excessive humidity and heat. PreferabIy, keep itin an air-conditioned environment with
temperatures notexceeding 40ºCeIsius(104ºFahrenheit).
●When instaIIing, pIace the equipment on a sturdy, IeveI surface toprevent itfrom accidentaIIy faIIingand causingdam
age to other equipment or injury to persons nearby.
●When the equipment is inan open position, do not cover, bIock or in any way obstruct the gap between it and the
power suppIy. Proper airconvection is necessary tokeep it from overheating.
●Arrange the equipment’s power cord in such a way that others won’t trip or faII over it.
●If you are using a power cord that didn’t ship with the equipment, ensure that itis rated for the voItage and current
IabeIed on the equipment’s eIectricaIratings IabeI. The voItage rating on the cord shouId be higherthan the one Iisted
onthe equipment’s ratings IabeI.
●ObserveaIIprecautions and warnings attached to the equipment.
●If you don’t intend on using the equipment for a Iong time, disconnect itfrom the power outIet toprevent being dam
agedbytransientover-voItage.
●Keep aIIIiquids away from theequipment to minimize the risk of accidentaI spiIIage.Liquid spiIIed on to the power
suppIy oronother hardware may cause damage, fire oreIectricaIshock.
●OnIy quaIified service personneI shouId open the chassis. Opening it yourseIf couId damage the equipment and invaIi
date itswarranty.
●Ifany part of the equipment becomes damaged or stops functioning, have itchecked by quaIified service personneI.
What the warrantydoes not cover
●Any product, on which the seriaI number has been defaced, modified or removed.
●Damage, deterioration ormaIfunction resuIting from:
●Accident, misuse, negIect, fire, water, Iightning, orother acts of nature, unauthorized product modification, or
faiIuretofoIIowinstructions suppIiedwith the product.
●Repair or attempted repair by anyone notauthorized by us.
●Any damage of the product due to shipment.
●RemovaI or instaIIation of the product.
●Causes externaIto the product,such aseIectric power fIuctuation orfaiIure.
●Use of suppIies or parts not meeting our specifications.
●NormaI wear and tear.
●Any other causes which does not reIate to a product defect.
●RemovaI, instaIIation, andset-upservice charges.
RegulatoryNotices Federal Communications Commission (FCC)
This equipment has been tested and found to compIy with the Iimits for a CIass B digitaI device, pursuant to Part 15 of the
FCC ruIes. TheseIimits are designed toprovide reasonabIe protection against harmfuI interference in aresidentiaIinstaI-
Iation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses,and can radiate radio frequency energy and, if notinstaIIed and used in accordance with the
instructions,maycauseharmfuIinterference toradiocommunications.
However, there is no guarantee that interference wiII not occur in aparticuIar instaIIation.If this equipment does cause
harmfuI interference toradio or teIevision reception, which can be determined by turning the equipment off and on, the
user is encouragedto try to correct the interference by one or more of the foIIowing measures:
●Re-position or reIocate the receiving antenna.
●Increase the separation between the equipmentand receiver.
●Connect the equipment into an outIet on a circuit different from that to which the receiver is connected.

Contents
< Part. 1 > APM 5064
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & InstaIIation
P.1
P.2 - 3
P.4 - 5
< Part. 2 > Product Specifications & LCD OSD
2.1 Product Specifications
2.2 On-screen DispIay Operation ( OSD )
P.6 - 7
P.8
< Part. 3 > Options
3.1 Option TabIe
3.2 S-Video + BNC & Audio
3.3 6.5" Touchscreen : Resistive, Capacitive
3.4 48V, 24V or 12VDC power
3.5 TV ( AnaIog )
P.9
P.10
P.11
P.12
P.13 - 14

Before Installation
●It is very important to mount the equipment in a suitabIe cabinet or on a stabIe surface.
●Make sure the pIace has a good ventiIation,is out of directsunIight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
incIuded and in goodcondition. Ifanything is missing,or damaged, contact the suppIierimmediateIy.
How To Clean Your LCD Monitor
Caution :
●To avoidtherisk of eIectric shock, make sure your hands are dry before unpIugging your monitor from or
pIugging yourmonitor into aneIectricaI outIet.
●When you cIean your monitor, do notpress down on the LCD screen. Pressing down on the screencan
scratch or damage your dispIay. Pressure damage is not covered under warranty.
●Use onIycIeansers made specificaIIy for cIeaning monitors and monitor screens. CIeansers not made to
cIean monitors and monitor screens canscratch the LCD dispIayor strip off the finish.
●Do notspray any kind of Iiquid directIy onto the screen or case of your monitor. Spraying Iiquids directIy
onto the screen or case can cause damage which is not covered under warranty.
●Do notuse paper toweIs or abrasive pads to cIean your monitor. Using an abrasive pad or any wood based
paper product such as paper toweIs canscratch your LCD screen.
Cleaning Your Monitor
TocIean your LCD safeIy, pIease foIIow these steps :
1 Disconnect the power cord.
2 GentIy wipe the surfaceusing a cIean, dry microfiber cIoth. Use as IittIe pressure as possibIe.
Cleaning Tough Marks and Smudges
Toremove tough marks and smudges, pIeasefoIIowthese steps :
1 Disconnect the power cord.
2 Spray a smaII amountof non-abrasive cIeanser on a microfiber cIoth.
Caution : Do not spray or applyany liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directlyon the parts you are cleaning.
3 GentIy wipe the surface. Use as IittIe pressure as possibIe.
4 Wait untiI your monitor is compIeteIy dry before pIugging it in and powering it up.

< Part 1 >
< 1.1 > Package Content –APM 5064 6.5" LCD Display
APM 5064
6.5" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Mounting hardware X 1 pack
- Mounting bracket x 2 pcs
- M4* 6mm screw x 4 pcs
- M4* 50mm screw x 4 pcs
Standard IIO
Power VGA
AD1.2 upgrade IIO
Power S-Video BNC VGA Audio
in - in - out
PC Video
- Options : S-Video + BNC, Audio

1
2
3
4
< 1.2 > Structure Diagram - APM 5064
Front view
5
1 Rear case
2 LCDpaneI
3 3mm protective gIass
( NEMA 4 / IP65 front protection for NAP series )
4 6mm aIuminum front bazeI
5 Audio speaker, pair
6 LCD membrane
Rear view
6
Model
ProductDimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
APM5064
255 x 68 x 182 mm
10 x 2.7 x 7.2 inch
515 x 117 x 429 mm
20.3 x 4.6 x 16.9 inch
1.5 kg
3.3Ibs
3.5 kg
7.7Ibs

< 1.2 > Dimension - APM 5064
Front View Side View
-6
Rear View
Bottom View
UNIT:mm
1mm = 0.03937 inch

Step
¦ In
¦ Ad
x 4 p
< 1.3 > Panel Mount Installation –APM 5064
1
Mounting
bracket
x 2 pcs
2
M4*6mm screw
x 4pcs
3
M4*50mm screw
cs
Hardwareset part no.UV-BK#1
s
staII 2 mounting brackets with 4 x M4*6mm screws
just the LCD paneI with 4 x M4*50mm screws and fix it on the surface.

M4 screw
VESAmount ( 75*75mm )
¦ Hardware and M4*4 pcs for VESAmount ar
< 1.3 > VESAmount Installation –APM 5064 6.5” LCD Displ
e not provided

< Part 2 >
< 2.1 > Product Specifications
Mechanical
Design
APM 5064
Front PaneI
BIack, RAL 9005
Rear Casing
Dark grey,RAL 7037
VESAMounting
75 x 75mm
Other Mounting
PaneImount
Protection
3mm protectivegIass
LCD
Panel
Manufacturer
PaneI Size ( diagonaI )
6.5-inch TFTcoIor LCD
DispIay pixeI ( dots x Iines )
640 x 480
Brightness ( typ. )
800
Contrast Ratio ( typ. )
600:1
CoIor
262 K
Viewing AngIe ( L/R/U/D )
80/80/70/70
Response Time ( ms )
25
Dot pitch ( mm )
0.207
DispIayArea ( mm )
132.48H x 99.36V
Surface treatment
Anti-gIareHard-coating
Surface hardness
3H
BackIightType
LED
MTBF ( hrs )
50,000
Video
Connectivity
AnaIog
VGA
AnaIog0.7Vp-p
Power
Power SuppIy
Range
Auto-sensing 100 to 240VAC,
50/60Hz
Power Consumption
ScreendispIayON
14W or Iess
Power saving mode
4W or Iess
Power buttonOFF
1W orIess
Regulatory
Safety ApprovaI
FCC & CE

Environmental
Conditions
Operating
Temperature
0 to 50°C degree
Humidity
20~90%,non-condensing
Storage
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceIeration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
Product ( W x D x H )
255 x 68 x 182 mm
10 x 2.7 x 7.2 inch
Packing ( W x D x H )
515 x 117x 429 mm
20.3 x 4.6 x 16.9 inch
NetWeight
1.5 kgs / 3.3 Ibs
GrossWeight
3.5 kgs / 7.7 Ibs
Applicable
Format
VGA Input
PCSignaI
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz

< 2.2 > On-screen Display Operation ( OSD )
Power Iight
Green = On
Orange = Power saving
Membrane Switch Function
Power on / off LCD
DispIay the OSD menu
ScroIIs through menu options and adjusts the dispIayed controI
(To auto adjustment by pressing the button for 5 seconds)
Exit the OSD screen
ToggIe anaIog, digitaI & video connection (DVI-Dand video options onIy)
OSD Configuration Page
Image:
forthe brightness, contrast,coIor temp, red, green, and bIue
Geometry:
forthe autoadjust, H position, V position, phase andcIock
Video:
forthe coIour, tint, sharpness, noise reduction, DCDi andTV Setup
Audio:
forvoIume, bass, trebIe, baIance,AVL andmute
Misc:
for the Ianguage, OSD position, graphic mode, ratio, reset andtimer

< Part 3 > Options
< 3.1 > Option Table
Options
APM
PM
S-Video + Composite ( BNC )
Audio
Touchscreen
DC Power
TV *
*
( 1 ) For TV option , this comes with RC-2 remote controller.

< 3.2 > AD1.2 Upgrade Options :
- S-Video + BNC
- Audio
Power S-Video BNC Audio
VGA in - in - out
PC Video
AV
Audio :S-Video + Composite (BNC)
: 3.5mm audiojacks for audio in &out, and 2W + 2W speakers

< 3.3 > Options : Touchscreen & driver 6.5” LCD Display
6.5" USB Touchscreen Specification
● USB touchscreen package incIudes 1 x6ftUSB cabIe, quick referenceguideIine and CDdisc
● FordetaiIed information,pIease refertothe attached CD disc
● As the touchscreen unit is notmadeof toughened gIass, pIeasehandIe itcarefuIIy
USB Touchscreen
Power
VGA
Model
TRB
e-Resistive
TCB
e-Capacitive
Technology
5-WireResistive
Capacitive
Method
StyIus or Finger
Finger
ActivationForce
= 50g / StyIus=R0.8
= 50g
Durability
35miIIiontouches
300miIIiontouches
Response Time
15 ms
20 ms
OpticalTransmittance
80% ± 3%
87% ±2%
SurfaceHardness
3H
9H
Haze
8% ± 3%
7%
Glass
1.4 ±0.2 mm
1.8 mm ±10%
Connector
USB TypeA
Compatibility
Windows 7 / XP / Vista, Linux

Please follow the below steps to setup the touch screen:-
Step 1. Run the bundIed CD disc
Step 2. DoubIe cIick the Setup.exe
Step 3. FoIIow the instaIIationinstruction to finish the setup
Step 4. After instaIIation, run the TouchKit program & the “4 pointcaIibration”
PIease dothe initiaI caIibration
after the first setup

< 3.4 > Options : DC Power
Model
12V
24V
48V
Input rating
Input voItage:
12-VoIt
24-VoIt
48-VoIt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Input current
-No Ioad
50 mA
50 mA
50 mA
-FuII Ioad
4950 mA
2450 mA
1220 mA
Output rating
Output voItage:
12-VoIt
12-VoIt
12-VoIt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%

< 3.5 > Options : TV ( Analog )
TV
6.5” LCD Display
Power S-Video BNC VGA Audio
in - in - out
PC Video
*** For TV option :
( 1 ) 1 x RC-2 remote controller included.
( 2 ) Casing dimensions will be changed.

1
8
2
INPUT MUTE
VOL
9
1 2 3
3
4 5 6 CH
10
7 8 9
4
AUTO 0
-/--
F REEZE 11
12
5
MENU SE LECT ASP ECT 13
14
6 ENTER
SLEEP
15
16
7
BACK EXIT
PIP
17
PIP
20
S OURCE SWAP POSITION
AUDIO 18
PIP
21
19
How to Use RC-2 Remote Controller
r
1
INPUT SeIect thesource
2 Switcheson or off theTV
3
0 - 9 OnIy use in TV mode. SeIect channeIs. For channeI numbers 10
and above, enter the second digit withintwo seconds.
4 AUTO Auto adjust
5 MENU DispIaythe menu on the screen or gotothepreviousmenu
Goto theupper menuor seIecttheprevious vaIue /
Goto thenextmenu orseIectthe next vaIue /
6 ? / ? / ? / ? / ENTER Decrease the setting vaIue /
Increasethe settingvaIue or entertotheseIect itemsetting
Enterto the seIectitem settingsor excude the setting
7 BACK Back to previous vaIue
8 MUTE Turn on or offthe speaker
9 Vol + I - Increase or decreasethe speaker voIume
10 CH + I - ForTV modeI onIy, increase or decrease thechanneI number
11 FREEZE Reserve for OEM modeI
12 - I -- For setting input singIe or doubIe digits
13 ASPECT Adjust thescreen size
14 SELECT To seIect the existing item
15 SLEEP SeIect thesIeepingtime
16 EXIT Exit the menuor canceI
PIP functions
17
PIP
Picturein picture
18
PIP AUDIO
To set the audioof in PIP mode
19
POSITION
To set thescreen position in PIPmode
20
SOURCE
PIPSource
21
SWAP
Swapscreenin PIPmode