ACTi ACM-5611 User manual

www.acti.com * Latest product information: www.acti.com/product/
* Accessory information: www.acti.com/accessory/
110205
Box Came r a
ACM-5601/ACM-5611
Megapixel IP PoE Box
Camera / Megapixel IP
D/N PoE Box Camera
• 1/3” Aptina Progressive Scan CMOS
• Day and night function with mechanical IR cut lter
(ACM-5611)
• Minimum illumination 0.5 lux at F1.0 (ACM-5601) /
0.05 lux at F1.0 (ACM-5611)
• Built-in f4.2 mm / F1.8 Megapixel xed lens
• 8 fps at 1280 x 1024 resolution
• Selectable MPEG-4 SP, MJPEG compressions
• Two-way audio
• Video motion detection
• Digital input and digital output
• Powered by PoE Class 3 / DC 12V
Unit: mm [inch]
1 Ethernet Port
2 Reset Button
3 Audio Input / Output
4 Digital Input / Output
5 DC 12V Power Input
PHOTO INDICATION DIMENSION DIAGRAM
1
2
5
3
4
* One xed lens is included.
Lens
PLEN-0102 IR Compatible, Fixed Iris, F1.8, 8 mm,
33.3° (For ACM-5601 only)
PLEN-0107 Manual Iris, F1.4, 3.5 mm - 8 mm, 70° -
31.6° (For ACM-5601 only)
PLEN-0201 Manual Iris, F1.2, 2.4 mm - 6 mm, 101.3° -
45.6° (For ACM-5601 only)
PLEN-0202 IR Compatible, Manual Iris,
F1.6, 2.8 mm - 12 mm, 91.1° - 22.9°
Outdoor Housing & Bracket
PMAX-0200 IP66, with heater and fan powered by
110V AC,
-30 °C ~ 50 °C (-22 °F ~ 122 °F), requires
housing bracket
PMAX-0201 IP66, with heater and fan powered by
220V AC,
-30 °C ~ 50 °C (-22 °F ~ 122 °F), requires
housing bracket
PMAX-0202 IP66, 0 °C ~ 50°C (32 °F ~ 122 °F),
requires housing bracket
PMAX-1101 Aluminum, max. load 10 kg (22.05 lb), tilt
angle 90°
(For PMAX-0200, PMAX-0201, PMAX-
0202)
Camera Bracket
PMAX-1100 Plastic, max. load 3.5 kg (7.72 lb), tilt
angle 90°
ACCESSORY OPTIONS
Popular Mounting Solutions
Corner PMAX-0200/
PMAX-0201
PMAX-1101
PMAX-0402
Pole PMAX-0200/
PMAX-0201
PMAX-1101
PMAX-0502
* For more mounting solutions, please refer to Mounting Accessory section of Buyer's
Guide or Project Planner on www.acti.com
+
+ +
+

BulletBox Cube Fixed Do me Spee d D ome Vid eo Enc o der Vid eo Decod er
IP VIDEO SOLUTION PRO DUCT
* All specications are subject to change without notice.
* All brand names and registered trademarks are the property of their respective owners. www.acti.com
110205
ACM-5601 ACM-5611
• Device
Device Type Box Camera
Image Sensor Aptina Progressive Scan CMOS
Sensor Size 1/3” (4.8 x 3.6 mm)
Day / Night No Yes
Minimum Illumination Color: 0.5 lux at F1.0 (30 IRE, 2400°K)
B/W: 0.5 lux at F1.0 (30 IRE, 2400°K)
Color: 0.5 lux at F1.0 (30 IRE, 2400°K)
B/W: 0.05 lux at F1.0 (30 IRE, 2400°K)
Color to B/W switch DSP based switch, congurable CDS sensor based switch
Mechanical IR Cut Filter No Yes
IR Sensitivity Range No 700 - 1100 nm
IR LED No
Electronic Shutter 1/30 - 1/1,000 sec (60Hz); 1/25 - 1/1,000 sec (50Hz) (manual mode)
1/5 - 1/15,000 sec (auto mode)
• Lens
Focal Length Fixed focal, f4.2 mm / F1.8
Iris Fixed iris
Focus Manual focus
Mount Type C/CS mount (interchangeable lens)
Horizontal Viewing Angle 64.4°
• Video
Compression MPEG-4 SP, MJPEG
Maximum Frame Rate
vs. Resolution
8 fps at 1280 x 1024 (SXGA); 10 fps at 1280 x 720 (HD 720p); 30 fps at 640 x 480 (VGA);
30 fps at 320 x 240 (QVGA); 30 fps at 160 x 112 (QQVGA)
Multi-Streaming Multiple streams based on single conguration
Bit Rate 28 Kbps - 3 Mbps (per stream)
Bit Rate Mode Constant, Variable
S/N Ratio More than 44 dB
Image Enhancement White balance: automatic, hold, predened, manual; Brightness; Saturation; Contrast; Sharpness;
Automatic gain control; Auto exposure: automatic, predened, manual; Flickerless
Privacy Mask 1 congurable region
Text Overlay User dened text on video
Image Orientation Image ip and mirror
• Audio
Compression 8 kHz, Mono, PCM, 16 bit encoding
Audio-In 3.5 mm Phone Jack
Audio-Out 3.5 mm Phone Jack
• Network
Protocol & Service TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP,
DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP , Bonjour
Ethernet Port 1, Ethernet (10/100Base-T), RJ-45 connector
Security IP address ltering; HTTPS encryption; Password protected user levels
• Alarm
Alarm Trigger Video motion detection (3 regions); External device through digital input
Alarm Response Notify control center; Change camera settings; Command other devices; E-mail notication with snapshots;
Upload video, snapshot to FTP server; Activate external device through digital output
• Interface
Digital Input 1, terminal block
Digital Output 1, terminal block
• General
Power Source /
Consumption
PoE Class 3 (IEEE802.3af) / 4.3 W
DC 12V / 3.3 W
Weight 400 g (0.88 lb)
Dimensions (W x H x D) 67 mm x 55 mm x 129.5 mm (2.64” x 2.17” x 5.10”)
Operating Temperature 0 °C ~ 50 °C (32 °F ~ 122 °F)
Operating Humidity 10% ~ 85% RH
Approvals Camera: CE, FCC; Adapter: CE, TUV-GS, UL, RCM, CCC
• Integration
Unied Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
PRODUCT SPECIFICATION
ACM-5601/ACM-5611
Box Camera