Activa STAR PROJECTOR NIGHT LIGHT WITH WHITE NOISE User manual

STAR PROJECTOR NIGHT LIGHT
WITH WHITE NOISE
USER MANUAL
CAUTION:
1. Please do not use this device under
the environment of explosives or other
inflammables.
2.
Do not store or use anywhere the product can
come in contact with water or any other liquids.
3. Always use the equipment as indicated. If
you find any defective components whilst
assembling or checking the equipment, or if
you hear any unusual noise coming from the
equipment during use, stop. Do not use the
equipment until the problem has been rectified.
PRODUCT SPECIFICATIONS:
• Model: ACT-STARPROJ-001
• Size of product itself: 162x115cm
• Net weight of product itself:311g
• Single package size:16.5x16.5x13.5cm
• Net weight of product including
package:530g
• Materials: ABS
1. Ocean wave light has 3 levels brightness:
A long press can switch between
brightness’s
2. Charging Port
3. Short press play previous song; Long
press reduce volume
4. Short press play next song; Long press
increase volume
5. Short press control the music play/pause
6. Short according to the implementation
of the wireless connection switch/white
noise model
7. Power ON/OFF
WL
White noise
OFF
Remote Receiving Area
DC 5V 1A
ON
1
3
4 5 6
2
7

1. LED Ocean Wave Light
ON/OFF Button
2. Laser Light ON/OFF Button
3. Press “R” the red light will
turn ON; Press again and
the red light will turn OFF
4. Press “G” the green light
will turn ON; Press again
and the green light will
turn OFF
5. Press “B” the blue light will
turn ON; Press again and
the blue light will turn OFF
6. Press “W” the white light
will turn ON;
Press again and the white
light will turn OFF
(Note: You can combine
two of the four color
RGBW buttons to form a
double-color projection.)
7. Increase Volume Button
8. Decrease Volume Button
9. Play Previous Song Button
10. Play Next Song Button
11. Voice Control Button
12. Speed up Ocean Wave
Speed (Pause--Slow--
Medium--Fast)
13. Slow Down Ocean Wave Speed
(Fast--Medium--Slow--Pause)
14. Timer Off
15. Press “FADE 1”, ocean wave
moves circularly in R-G-B-W
single color mode and the
laser light will be changed to
gradation mode.
16. Press “FADE 2”, ocean wave
moves circularly in RB-RG-
RW-BG-BW-GW double-color
mode and the laser light will
be changed to gradation
mode.
17. 1H Timer: Press once to shut
off automatically after 1 hour
18. LED Brightness Button
19. Laser Light Button: press
once to turn on the laser
light, press twice to enter
into gradation mode
20. 2H Timer: Press once to shut
ff automatically after 2 hours
21. Sound Button: A short press
will switch to music and a
long press will change to the
white noise.
LIMITED LIFETIME WARRANTY
Your product is backed by a limited lifetime
manufacturer’s warranty. Activa will repair or
replace your device at any time should it fail due
to a defect in material or workmanship, subject to
the certain limitations.
This limited warranty does not cover any damage
that results from unauthorized or improper use,
service, or repair. Further, it does not cover
damage caused by accident, impact, negligence,
or normal wear and tear. Should you discover
your product is not functioning properly, please
send your device to our repair center for
evaluation. If your product cannot be repaired or
serviced, we will reserve the right to change it for
a similar or newer model.
Please note that a flat rate of $18.00 will be
charged to cover a service evaluation fee and
return shipping of your device. All warranty claims
must be accompanied by a copy of your proof of
purchase from an authorized retailer. Please send
your device, proof of purchase, and a check or
money order in the amount of $18.00 made out
to Activa to:
Address:
Activa Service Center
3069 Taft Street
Hollywood, FL 33021
PRODUCT OVERVIEW:
1
2
4
10
15
19
17
7
6
18
20
21
3
11
8
13
9
5
12
14
16
s+
s-
1H
B
R G
W
H2H
2
FADE
MUSIC
LASER
LED
LASER
LIGHT
1
FADE