Wimius S26 User manual
THE PROJECTOR
USER MANUAL
S26
English
Deutsch
Français
Español
Italiano
日本語
01-25
26-50
51-75
76-100
101-125
126-147
LANGUAGE
Foreword
Warnings
Precautions
Structural Diagram
Package Lists
Projector Specications
Multimedia Supported Files
Product Overview
Remote Control
Installation
Installing the Projector
How to clean the “ Black Spot”?
Projector Setting
Projection Distance&Size
04
04
05
06
06
06
07
07
08
09
09
09
10
12
Starting the Projector
Power On/Power Off
Language Setting
Keystone Correction & Focus & Digital Zoom
Signal Source & Multimedia Connection
Wireless Connection
Screen Mirroring ( For iOS System)
Screen Mirroring ( For Android System)
Bluetooth Connection
Main Menu Function
Factory Reset
System upgrade
Scheduled Shutdown
Power On Option
FAQ
Contact US
12
12
13
13
16
17
17
19
21
23
23
24
24
24
25
26
Content
15
4
EN
Foreword
Warnings
Dear Customer,
Luckily, your projector is already in your hands! Let's start enjoying the unique movie night with your family.
Please read this manual thoroughly before using the projector.
Do you have any questions on how it works? Are you satised with your projector? If you have any issues, send
email to [email protected], attaching your order number and the description of you issue. We will x your
issues as soon as possible.
Customers sometimes can meet some confusion when using the projector. Rather than trying to communicate
directly with us, many buyers instead just leave a comment on the product page. However, most negative comments
are caused by non-standardized use rather than a defect in the product itself. Actually, many problems can be
easily solved by setting, such as no signal, no sound, etc. We promise all the projectors have been carefully checked
and packaged before shipping. Therefore, if you have any questions, please contact us and give us an opportunity
to improve it. We guarantee that we will provide you with the most satisfactory solution.
Thanks for your understanding!
Best regards,
WiMiUS Brand Team
1. High brightness lamp! Please don’t look directly into the lamp.
2. Adjusting the contrast, brightness and focal length according to different input signals is the key to make the
picture clear; otherwise, the picture will be blurred;
3. There is high voltage inside the projector. Please don’t open the cover and touch the internal parts of the
machine.
15
5
EN
Precautions
1. Clean
When cleaning this projector, please pull out the power cable. Use a wet cloth to clean, don’t use any detergent that
may damage the unit.
2. Accessory
Please use our recommended accessory. Or it will damage the projector.
3. Correct environment
Do not place the projector in a wet environment, like a damp basement or near the swimming pool, etc.
4. Ventilation
The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause
the projector to heat up.
5. Power
Please make sure the power is within the required power range.
6. Thunder
For thunder day, please unplug the power cable from the projector.
7. Repair
Due to high voltage inside, please do not open or try to repair the projector by yourself. Don't disassemble the
projector without our suggestion, otherwise, any warranty will be invalid. Seek help from an authorized agent or
qualied professionals when needed.
8. Keep away from heat device
Please make sure the projector is far away from any heat devices which will damage the projector.
15
6
EN
Structural Diagram
Package Lists
Projector Specications
Projector x 1 Remote Control x 1 Power Cable x 1 AV Signal Cable x1 HDMI Cable x1
Portable Bag x1 User Manual x1 Cleaning Swab x2 Screwdriver x1
R
E
Model No.S26
Display Technology LCD Light Source LED
Resolution Native 1920x1080P Focus Manual
Installation Type Front/Rear/Ceiling/Desktop Aspect Ratio 16:9/4:3
Product Size 234×192×94mm Product Weight 1.6kg
Input Interface HDMI/USB/AV/3.5mm audio Output Interface Audio out
15
7
EN
Multimedia Supported Files
Files Support Doesn't Support
Audio Format MP3, AAC, WAV, WMA, M4A, OGG,
FLAC Dolby AC3, DTS, DivX, VC1, RM, RMVB, FLV, etc
Image Format JPG, PNG, BMP, JPEG
Video Format MP4, MKV, WMV, 3GP, MPG, TP, TS,
F4V, DAT, FLV, TRP MSVC / CRAM , MP42, GMC, IV32, RLE, cvid, RV20,
DivX, RM, RMVB, VC1, FLV
File Format TXT, XLSX, DOCX, PPT
If play the above les, the projector still can’t work properly, please don’t hesitate to contact us via
Product Overview
1
23456 7 8
1. Arrow Keys /Conrm
2. Power
3. Back
4. Source
5. Earphone/3.5mm
Audio Out
6. Audio, Video Input
7. USB Input
8. HDMI Input
15
8
EN
Remote Control
1. Power
2. Signal Source
3. Arrow keys
4. Menu
5. Home page
6. Volume+
7. Volume-
8. Mute
9. Flip
10. Conrm
11. Back
12. Previous
13. Next
1
29
310
411
13
12
5
6
7
8
1. Install 2 pieces of AAA batteries(not included) into the remote before using it. Do not combine new batteries with
old ones in remote controller, which can cause operation failure due to insufcient power supply.
2. When using the remote control, please make sure that the signal transmitter of the remote controller aims at
infrared signal of the projector.
3. When you are not using the remote controller for a long period. Please take out the batteries to prevent it from
leakage.
NOTE:
15
9
EN
Installation
Installing the Projector
How to clean the “ Black Spot”?
Keep the projector vertical and towards the mid of projector screen, keep the projection image at on the screen.
The S26 has special clean door to help you clean the inner lens, it will greatly extend your use lifespan and
enhance the movie enjoyment!
1. To adjust the tilt base, unscrew the support rod at the bottom of the projector, see below picture.
2. For Ceiling mount, there are 4 holes at the bottom of the projector (M5*10mm). Please slowly unscrew the 4 black
rubbers, then you can nd the holes for ceiling mount, see below picture.
NOTE: The hanging bracket or ceiling mount stand is not packaged.
12 3
1. Support base thread Adjust the height of the projector
2. Rubber Pads/Holes Fix with M5x10mm Screws
3. Dusting Mouth Cover Dismantle it to clean the screen inside
Please Kindly Note: Any electrical appliances will automatically inhale dust during operation, so man dust falls
into the projector lens, it will have "Black dots" in the screen, it will make bad enjoyment to your use!
15
10
EN
Tear off the bottom label, dismantle the Dusting Mouth Cover with a screwdriver(Included).
Method 1: Use the cold wind to blow the dusting mouth.
Method 2:(The most effective method): Use the cleaning swab (Included) to reach inside to clean the inner screen.
(We offer cleaning video!)
NOTE: Please contact our e-mail [email protected] for a video if you need detailed steps!
Projector Setting
Select Projection Mode to obtain a front and upward image:
Menu>Settings>Projection Image Setting>Projection Mode.
Press arrow key to select and press “OK” to conrm.
15
11
EN
1. Front-Desktop 2. Rear 3. Front-Ceiling 4. Rear-Ceiling
The projector can be hanged on the ceiling with special hanger fame,and placed on the stable desk to project the
image according to the operating environment and requirements.
Note: Keep the projector at a height where its lens is axial symmetry to the screen. If it is not possible, use the
keystone correction ring to adjust the image.
Front/Ceiling Rear/Ceiling
Table mounted
RearFront
15
12
EN
Projection Distance&Size
1.55m 2.17m 3.10m 3.72m 5.50m
50”
70”
100”
120”
200”
Recommended projection distance: 2.4-3M.
1. The image size depends on the distance between projector and screen. there may be 3% measure difference
among above listed data.
2. The recommended projection distance varies with different projection contents. Please adjust the distance
between the wall/ screen and the projector properly as needed.
3. Ambient darkness will improve the clarity of the projected images.
Starting the Projector
Power On/Power Off
1. First connect the power cord to the projector, plug it tightly.
2. Once the projector is plugged in, it will be in Standby mode.
3. If not use for a long time or encounter thunder and lightning, please unplug the power cord.
Power on: Press the button“ ”on the projector or on the remote control to turn on the projector.
Power off: Press the power button on the remote control again to turn the projector off.
15
13
EN
Language Setting
Keystone Correction & Focus & Digital Zoom
Language Change:
1. First enter the settings in the upper right corner of the main menu.
2. Then select the language setting option in "Other Setting", and choose the language you want.
To get the clearest pictures: Firstly use the remote control to adjust the keystone correction to make image rectangle
and at on the screen, then slowly rotate the focus lens to make the picture clear.
Note: Keep the projector vertical with projector screen and keep it on the same level.
1. Keystone Correction
2. Focusing
12
15
14
EN
1. Keystone Correction
Menu>Settings>Projection Image Setting>Keystone Advanced.
a. The projector has both vertical keystone and 4-point keystone, you can not only adjust the image vertically,
but also adjust four points to make the image rectangle.
b. Vertical keystone±50 ° : adjust the the screen angels with the arrow keys vertically, until the guides are
adjusted to a rectangle.
c. 4-Point keystone: adjust the screen with the arrow keys until the guides are adjusted to a rectangle.
Note: The projected image may be bury or difficult to
see, this is due to lack of focus adjustment with the lens,
please follow the processes below to adjust the focus.
15
15
EN
2. Focus
Rotate the focus ring slowly. At the same time, check the resolution point carefully. The best focus point for the lens
would be where the image most clear.
Note: If it is still blurry, please contact the seller support e-mail for help!
The E-mail: [email protected]
3. Digital Zoom
Menu>Settings>Projection Image Setting>Digital Zoom.
You can reduce the display size from 100% to 1% propotionally.
Note: Before adjusting the display size, the “Keystone Advanced” shall be selected to "Front" mode.
15
16
EN
Signal Source
Signal source selection
Press the remote control signal source key "S", enter the signal source menu interface. Use the direction key and the
conrmation key to select the signal source.
1. HDMI equipment connecting
a. HDMI interface can be connected with the computer and other with VGA HDMI output interface device.
b. Choose the media signal channel :“HDMI”.
2. AV Connection
a. Use AV cable for connecting as follows, choose the "AV" source input.
3. USB Connection
a. Insert the USB ash driver into the USB port and choose the corresponding les( video or pictures), then press
“Play/ Pause” button(OK )to display or stop.
4. Audio Out Connection
a. User can connect the projector to an external speaker or headphones via 3.5mm earphone jack.
15
17
EN
Wireless Connection
Screen Mirroring ( For iOS System)
Important Tips for Wireless Connection:
On the projector:
Note: Both mobile phone and projector are connected to the same WiFi/hotspot
1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A
bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter
is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. If the projected image freezes when you switch the screen mirroring interfaces, please long press “OK” button for
5 seconds on the projector/ remote to do a reset, and the reset process will complete in 2 minutes, please wait
patiently.
5. Any questions, please feel free to contact WiMiUS [email protected].
1. Select "Settings" in the upper right corner on the main menu, click into it and select "WiFi Setting".
15
18
EN
2. Select "Settings" in the upper right corner on the main menu, click into it and select "WiFi Setting".
3. Return to the main menu, click "iOS Cast".
On your iOS device:
1. Click into the WiFi settings and make sure your phone is connected to the same Wi-Fi network or Hotpot as the
projector.
2. Activate the "Screen Mirroring/AirPlay Mirroring" of your iOS mobile device and then search for the projector
device, tap to connect it.
3. The display of your iOS mobile device will be projected to the wall/ screen via Home WiFi network data after a
successful connection.
15
19
EN
Screen Mirroring ( For Android System)
To activate this function, your Android device must support Multi-Screen/Wireless display. Names may differ from
different devices.
There are two methods for screen projection on Android phones. The rst is to connect the phone and the projector
to the same WiFi or hotspot; the second is to connect the phone to the projector’s WiFi directly.
Method 1: connecting the phone and the projector to the same WiFi or hotspot.
Note: Both mobile phone and projector are connected to the same WiFi/hotspot.
On the projector:
1. Select "Settings" in the upper right corner on the main menu, click into it and select "WiFi Setting".
2. Turn on the WiFi function and scan, search for home WiFi/Hotspot. When the WiFi name appears in the search
list, select it to connect.
3. Return to the main menu, click “Miracast”.
15
20
EN
On your Android phone:
On the projector
1. Click into the WiFi settings and make sure your phone is connected to the same Wi-Fi network or Hotpot as the
projector.
2. Activate Multi-Screen function on your Android device and nd the projector device, tap to connect it.
3. The display of your Android mobile device will be projected to the wall/screen via Home WiFi network data after
a successful connection.
1. On the main menu, click “Miracast”.
Method 2: Connecting the phone to the projector’s WiFi directly.
Note: If the projector was connected to the home WiFi, please disconnect it rst and then enter the “Miracast”.
Other manuals for S26
1
Table of contents
Languages:
Other Wimius Projector manuals
