Active Ideas HOVR User manual

SIT DOWN. START WALKING.
DESK MOUNT

HOVR SAFETY
HOVR is intended to be used only while the user is seated.
DO NOT STAND ON THE HOVR.
If you are over the age of 35, pregnant, physically inactive, taking
medications for your heart or blood pressure, or suffer from any
chronic illnesses, please consult your physician before using HOVR.
Children under 12 should be supervised by an adult when using
HOVR.
Caring for your HOVR
Rubber Discs
As with any surface exposed to the bottom of our shoes and feet, the
rubber on the independent discs will get dirty. To keep them clean,
simply wipe them down with a damp cloth every couple of months.
Support
For customer support issues please e-mail:
[e-mail]
Warranty
If your purchase has a manufacturing defect, we will repair or replace
the defective!part at no additional cost to you. Send a photo and a
brief description of the!defect to [email protected], and we will get
back to you right away.!!
HOVR reserves the!right to determine what constitutes a
manufacturing defect or wear and tear, but we!believe in building a
culture of mutual trust and respect – we’ve got your back.
2

INCLUDED
3
A. Wheel0Stopper0x01
A. HOVR0Body0and0Strap0x01
B. HOVR0Discs0x02
C. Stability0Ring0x02
A. Mounting0Bracket0x01
B. Screws0x04
C. Double-sided0Tape0x01
D. Small0Screwdriver0x01
A
B
C
A
B
D

ATTACHING THE DESK MOUNT
1. Place one piece of double-sided tape on the top of your desk-
mount (A).
2. While seated, pull yourself up to your desk to your ideal sitting
position.
3. With the hooks pointing towards you, tape the desk-mount on
the bottom of your desk or table directly above your knees or
slightly in front of your knees if you are over 5’10” feet tall.
4. Climb under your desk/table and straighten the desk mount.
5. Take a marker and mark where the holes in the desk-mount are
located.
6. Remove the desk mount and the tape.
7. Make 4 starter holes using your drill at the marks.
8. Hold the desk-mount in place and securely fasten ALL 4
screws.
Important:!
•Only attach the desk mount
to solid wooden desk tops
that are at least 1” in
thickness. Please make sure
that the legs of your desk are
sturdy.
•Never put all your weight on
the HOVR when it is attached
to the desk mount.
STEP 1 STEP 2-4 STEP 5-6 STEP 7 STEP 8
4

ASSEMBLING YOUR HOVR
Adjusting HOVR arm position
Position HOVR arms (A) at your desired width.
(See measurement guide on next page.)
Secure the arms (A) to HOVR body (B) using screws (D).!
Adjusting HOVR Strap length
Adjust the strap length at buckle (C).
Pull on excess strap to shorten.
Release excess strap to lengthen.!
Suspending your HOVR from the stand or desk-mount.
For optimal use, the bottom of the HOVR should hang 1-2
inches above the floor. The HOVR should not touch the floor
when in normal use except occasionally when it is positioned
on an extreme angle. 5

REMOVABLE STABILITY RING
The purpose of the stability ring is to allow the user to
restrict the level of instability of the HOVR.
We developed the stability ring in response to
customer feedback requesting the ability to either
reduce or increase movement at their discretion.
1
2
3
4
6

POSITIONING
AND ADJUSTMENT
7

GETTING THE MOST
OUT OF YOUR HOVR
The HOVR can be used either passively or actively. To
use it passively, just place your feet on the HOVR and
allow your feet to move naturally. For active use,
approach your movements like you would a
traditional exercise program. First, select a movement,
pick a number of repetitions, and then lastly, pick a
number of sets.
PATENTED
“HOVR”
by Active IDEAS LLC
Chicago, ILLINOIS USA
hovrpro.com
FOR DETAILED SETUP AND
INSTRUCTIONAL VIDEOS, PLEASE VISIT
OUR WEBSITE:
8