ActivO MOTION PRO E4.1 User manual

Cover & Inner.indd 3Cover & Inner.indd 3 4/17/2014 11:29:43 AM4/17/2014 11:29:43 AM

User Manual
All information is correct at the time of print
Cover & Inner.indd 4Cover & Inner.indd 4 4/17/2014 11:29:43 AM4/17/2014 11:29:43 AM

CONTENTS
Safety Instructions 1
Warranty Claims 2
Product Parts 3
Product Installation 7
Product Operation Guide 14
Product Maintenance 28
Product Specifications 28
Contact Us 29
Thank you for choosing Activo Motion Pro E4.1. Please read the user manual carefully before use,
especially the safety instructions. Keep the manual for further reference.
REMARKS:
Before installation, please unpack all related accessories and check if you have all of them.
Related installation diagrams are supplied with corresponding texts, descriptions and legend
reference.
Activo Motion Pro E4.1 EN.indd 1Activo Motion Pro E4.1 EN.indd 1 4/17/2014 11:30:59 AM4/17/2014 11:30:59 AM

User Manual 1
MOTION PRO E4.1 Safety Instructions
BE SURE TO READ THE ENTIRE MANUAL BEFORE YOU ASSEMBLE OR
OPERATE YOUR MACHINE. IN PARTICULAR, NOTE THE FOLLOWING SAFETY
PRECAUTIONS:
1. Assemble the machine exactly as the descriptions in the user manual.
2. Check all the screws, nuts and other connections before using the machine. Only do exercising
on the machine when it is in correct working way. Ensure that all users are adequately informed
of all precautions.
3. Assemble the machine in a dry level place and leave it away from moisture and water; before
beginning exercising, remove all objects within a radius of 2 meters from the machine.
4. Place a suitable base (e.g. rubber mat, blanket etc.) beneath the machine in the area of
assembly or exercise to avoid scratch, dirt and etc.
5. Do not use aggressive cleaning articles to clean the machine, and remove drops of sweat from
the machine immediately after finishing exercising.
6. Only use the supplied tools or suitable tools to assemble or repair the machine; use only
original spare parts for any necessary repairs.
7. Your health can be affected by incorrect or excessive exercising. Before exercise, consult your
doctor. This is especially important for people over the age of 35 or those with pre-existing
health problems.
8. This machine is intended for indoor, home and commercial use, not suitable for therapeutic
purpose.
9. Wear appropriate clothes and athletic shoes when exercising to avoid tripped or trapped by
loose clothes.
10. If you have a feeling of pain, chest congestion, tachycardic, tachypnea, light-headed, dizziness,
sickness or other abnormal symptoms, please stop immediately and consult your doctor before
continue.
11. The power of the machine increases with increasing the speed.
12. The maximum user’s weight is 120KGS.
Activo Motion Pro E4.1 EN.indd 1Activo Motion Pro E4.1 EN.indd 1 4/17/2014 11:30:59 AM4/17/2014 11:30:59 AM

User Manual 2
MOTION PRO E4.1 Warranty Claims
User Manual 2
1. Warranty is not transferable.
2. This warranty is effective only if the product is purchased from ACTIVO or its authorised dealers.
3. Proof of purchase (original receipt) is required for all warranty repairs.
4. All implied warranties, including but not limited to these implied warranties of fitness and
merchantability, are limited to one (1) year from the date of purchase.
5. Damage due to misuse, improper treatment and unauthorised modification and repairs are not
covered by this warranty.
6. Warranty does not cover accessories and add-ons, which do not belong to this product.
7. Warranty is not effective to rental, business, commercial, institutional, or other nonresidential
users.
8. All services covered by this warranty must be approved by ACTIVO and repaired by authorised
technicians only.
9. If replacement parts for defective materials are not available, ACTIVO reserves the right to
make substitutions in lieu of repair or replacement.
Activo Motion Pro E4.1 EN.indd 2Activo Motion Pro E4.1 EN.indd 2 4/17/2014 11:30:59 AM4/17/2014 11:30:59 AM

User Manual 3
MOTION PRO E4.1 Product Parts
Main frame Console Handlebar post
Fixed handlebar Protective guard Front bottom tube
Rear bottom tube Handlebar Protective guard
Swing tube Pedal support Protective guard
Activo Motion Pro E4.1 EN.indd 3Activo Motion Pro E4.1 EN.indd 3 4/17/2014 11:31:00 AM4/17/2014 11:31:00 AM

User Manual 4
MOTION PRO E4.1 Product Parts
Protective guard Pedal Protective guard
Seat Seat tube Horizontal tube
Pin-pop knob Plum screw Flat washer D10 x ø20 x 2
Adapter Tool set
Activo Motion Pro E4.1 EN.indd 4Activo Motion Pro E4.1 EN.indd 4 4/17/2014 11:31:00 AM4/17/2014 11:31:00 AM

Activo Motion Pro E4.1 EN.indd 5 4/21/2014 9:14:59 AM

User Manual 6
MOTION PRO E4.1 Product Parts
Part List
Part No. Description Qty Part No. Description Qty
1 Main frame 1 35 Screw ST4.2x18 18
2 Front bottom tube 1 36L/R Protective guard 2pr.
3 Rear bottom tube 1 37 Bolt Φ12xM10x80 2
4 Handlebar post 1 38 Flat washer D12xΦ24x1.5 2
5 Fixed handlebar 1 39 Bushing Φ12xΦ32x15 4
6L/R Handlebar 1pr. 40 Bushing Φ16xΦ31x23 6
7L/R Swing tube 1pr. 41 Screw ST3.5x10 4
8L/R Pedal support 1pr. 42a/b Protective guard 2pr.
9 End cap 2 43 Arc washer D8xΦ19x1.5xR30 4
10 Hex screw M8x40xL12 2 44 Square neck bolt M8xL45 4
11 Roller 2 45 Foam grip 2
12 Flat washer D8xΦ16x1.5 12 46 Round cap 2
13 Nylon nut M8 12 47 Console 1
14 Hex nut M10 4 48 Round cap 2
15 Adjustable cushion 4 49 Pulse 2
16 Arc washer D8x2xΦ25XR39 4 50 Foam grip 2
17 Hex screw M8xL58 4 51a/b Protective guard 1pr.
18 Spring washer D8 12 52 Screw M4x10 4
19 End cap 2 53 Hex screw M8x16 8
20 Crank 2 54 Adapter 1
21 Wave washer Φ17xΦ23x0.3 4 55 U fixed bracket 1
22 Plastic bushing 4 56 Long axle 1
23L/R Pedal tube joint 1pr. 57 Seat 1
24 D-shape washer 4 58 Protective guard 1
25 Spring washer D10 4 59 Relay wire 1
26 Hex screw M10x20 4 60 Sensor wire 1
27 Screw M5x10 4 61 Saddle slide 2
28a/b Protective guard 2pr. 62 Handle pulse wire 2
29 Hex bolt M10x55 2 63 Pin-pop knob 1
30 Flat washer D10xΦ20x2 4 64 Bushing 1
31 Nylon nut M10 4 65 Seat tube 1
32 Bushing Φ18xΦ10x11 4 66 Plum screw 1
33 Hex screw M8x45 6 67 Square cap 2
34L/R Pedal 1pr.
Activo Motion Pro E4.1 EN.indd 6Activo Motion Pro E4.1 EN.indd 6 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 7
MOTION PRO E4.1 Product Installation
Step 1:
Install the Front bottom tube (2) and Rear bottom tube (3) to the Main frame (1) with the Hex
screw (17), spring washer (18) and arc washer (16).
Activo Motion Pro E4.1 EN.indd 7Activo Motion Pro E4.1 EN.indd 7 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 8
MOTION PRO E4.1 Product Installation
Step 2:
1. Make the Protective guard (58) covering on the Handlebar post (4).
2. Connect the Relay wire (59) with Sensor wire (60) properly at first, and then lock the
Handlebar post (4) onto the Main frame (1) with Hex screw (53), spring washer (18) and Flat
washer (12), then lock the Protective guard (58) tightly.
Activo Motion Pro E4.1 EN.indd 8Activo Motion Pro E4.1 EN.indd 8 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 9
MOTION PRO E4.1 Product Installation
Step 3:
1. Attach the Swing tube (7L/R) on the Handlebar post (4) with Hex screw (26), spring washer
(25), D-shape washer (24), Wave washer (21) and Long axle (56). Please don’t lock them
tightly now.
2. Fix the Pedal support (8L/R) on the Crank (20) with Hex screw (26), Spring washer (25),
Wave washer (21) and D-shape washer (24). Please don’t lock them tightly now.
3. Connect the Swing tube (7L/R) and Pedal support (8L/R) together with Bolt (37), Flat washer
(38), Flat washer (30) and Nylon nut (31), then lock Hex screw (26), Bolt (37) and Nylon nut
(31) tightly.
4. Lock the Pedal (34L/R) on the Pedal support (8L/R) tightly with Hex screw (33), Flat washer
(12) and Nylon nut (13).
Activo Motion Pro E4.1 EN.indd 9Activo Motion Pro E4.1 EN.indd 9 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 10
MOTION PRO E4.1 Product Installation
Step 4:
1. Lock the Handlebar (6L/R) onto the Swing tube (7L/R) tightly with Square neck bolt (44), Arc
washer (43) and Nylon nut (13).
2. Thread the Hand Pulse wire (62) into the hole of Handlebar post (4) and then take it out from
the console bracket. At last, lock the fixed handlebar (5) onto the Handlebar post (4) tightly
with Hex screw (53) and spring washer (18).
Activo Motion Pro E4.1 EN.indd 10Activo Motion Pro E4.1 EN.indd 10 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 11
MOTION PRO E4.1 Product Installation
Step 5:
1. Fix the Protective guard (42a/b) onto the Swing tube (7L/R) with Screws (41 & 35).
2. Fix the Protective guard (36L/R) onto the connection of Swing tube (7L/R) and Pedal support
(8L/R) with Screw (35).
3. Fix the Protective guard (28a/b) onto the Pedal tube joint (23L/R) with Screw (27).
Activo Motion Pro E4.1 EN.indd 11Activo Motion Pro E4.1 EN.indd 11 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 12
MOTION PRO E4.1 Product Installation
Step 6:
1. Firstly, connect the Relay wire (59), hand pulse wire (62) with the connecting wire of the
Console (47) properly, then fix the console (47) on the bracket of the Handlebar post (4) with
Screw (52).
2. Lock the Protective guard (51a/b) on the Handlebar post (4) tightly with Screw (35).
Activo Motion Pro E4.1 EN.indd 12Activo Motion Pro E4.1 EN.indd 12 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 13
MOTION PRO E4.1 Product Installation
Step 7:
1. Insert the seat tube (65) into the main frame (1), align the holes, and then tighten it with the
pin-pop knob (63).
2. Fix the horizontal tube (61) on the seat tube (65) with plum knob (66), flat washer (30) and
ufixed bracket (55).
3. Put the seat (57) onto the horizontal tube (61) and then use a cross wrench to tighten it.
NOTE:
Please make sure that the seat (57) is locked firmly in the horizontal tube (61) before use.
Activo Motion Pro E4.1 EN.indd 13Activo Motion Pro E4.1 EN.indd 13 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 14
MOTION PRO E4.1 Product Operation Guide
Functions:
1. Programs: 21 programs as following:
A: 1 Manual Program (See Fig 1)
Fig 1
Activo Motion Pro E4.1 EN.indd 14Activo Motion Pro E4.1 EN.indd 14 4/17/2014 11:31:01 AM4/17/2014 11:31:01 AM

User Manual 15
MOTION PRO E4.1 Product Operation Guide
B: 10 Automatic Programs P1~P10 (See Fig 2~Fig 11)
Fig 2 Fig 3
Fig 4 Fig 5
Fig 6 Fig 7
Fig 8 Fig 9
Fig 10 Fig 11
P1: ROLLING P2: VALLEY P3: FATBURN P4: RAMP P5: MOUNTAIN
P6: INTERVAL P7: CARDIO P8: ENDURANCE P9: SLOPE P10: RALLY
Activo Motion Pro E4.1 EN.indd 15Activo Motion Pro E4.1 EN.indd 15 4/17/2014 11:31:02 AM4/17/2014 11:31:02 AM

User Manual 16
MOTION PRO E4.1 Product Operation Guide
C: 1 Watt Control Program WATT (See Fig 12)
Fig 12
D: 4 Heart Rate Control Programs (See Fig 13 ~ Fig 16)
55%H.R, 75%H.R, 90%H.R and TARGET H.R
Fig 13 Fig 14
Fig 15 Fig 16
Activo Motion Pro E4.1 EN.indd 16Activo Motion Pro E4.1 EN.indd 16 4/17/2014 11:31:02 AM4/17/2014 11:31:02 AM

User Manual 17
MOTION PRO E4.1 Product Operation Guide
E: 4 User-defined Programs: CUSTOM1~CUSTOM4 (See Fig 17- Fig 20)
Fig 17 Fig 18
Fig 19 Fig 20
Activo Motion Pro E4.1 EN.indd 17Activo Motion Pro E4.1 EN.indd 17 4/17/2014 11:31:02 AM4/17/2014 11:31:02 AM