Actxa Sense 2 User manual

Get The Balance Right
Sense2
Smart Scale
Model No: CS10A
User Guide
Supports Actxa Wellness Programme and Healthy Living Score

Introducing Actxa Sense 2
The Actxa Sense 2 smart scale is a professional grade segmental body
composition analyser. It provides segmental analytics of your body
composition using 8 electrodes and dual frequency Bioelectrical
Impedance Analysis (BIA). It supports more than 20 body compositions
indicators, including weight, body fat percentage, visceral fat level,
muscle mass percentage, bone mass and total body water.
Actxa Sense 2 smart scale uses Dual-Frequency BIA technology to
measure your body impedance at two different frequencies. With
the additional frequency, an even higher accuracy of measurements
can be achieved as compared to body composition scale that uses
single frequency.
Together with Tetrapolar 8-point Tactile Electrodes measurement
method (4 ITO conductive layer on the scale and 4 metal electrodes
on the handle), Actxa Sense 2 smart scale is able to distinguish and
measure your body in five segments: each arm, leg and abdominal
area, and provide segmental analytics of body composition in these
five segments.
When the Actxa Sense 2 smart scale is paired with the Actxa App,
your measurements are synchronized wirelessly to your mobile phone.
The Actxa App provides health insights and the trending of your body
composition measurements that help you reach your target goals.

Scale Overview
Front
Hand Electrodes
Handle Cable
Display Screen
Foot ITO Electrodes
Back
Hand Electrodes
Reset Hole
Charging/Handle
Cable Port

Display Icons
Charging In Progress
What It MeansIcons
Bluetooth Connection
Muscle Mass Reading
Body Mass Index Reading
Body Fat Percentage Reading
Low Battery Alert
Overload Alert
Calibration In Progress

Charging The Actxa Sense 2
On your first use, charge your Actxa Sense 2 smart scale fully.
Step 1: Connect the bundled USB charging cable to the Actxa Sense 2,
before switching on the power either from an adapter or
standard USB port.
Step 2: Charge for approximately two hours.
Step 3: Turn off the power source and remove the USB charging cable.
You are ready to pair your Actxa Sense 2 smart scale with Actxa App.
Each full charge of the Actxa Sense 2 smart scale could last for around
90 days of usage. When the battery is low, the scale will display “Lo”.
Follow the steps above to charge the scale for approximately two hours.

Set-up With The Actxa App
Download the Actxa App to set up your personal account and to pair
your Actxa Sense 2 smart scale via Bluetooth. The Actxa App can be
installed from the App Store or Google Play. You may also scan the QR
code above.
Turn on Bluetooth and launch the Actxa App on your smartphone.
Follow the onscreen instructions to:
1. Set up and login to your Actxa App account
2. Set up your user profile. This involves providing information
such as gender, height and age.
3. Pair the Actxa Sense 2 smart scale with the Actxa App.
If you own another Actxa product and have already installed the Actxa
app, simply launch the app and add a new device. You can then follow
the onscreen instructions as previously indicated.
Once your set-up on the Actxa app is completed, your Actxa Sense 2
smart scale is ready to start measuring and tracking data.

At the Actxa App Dashboard, pull down the screen and follow the
onscreen instructions to take the measurement.
Once the measurement is completed, your results will be displayed
on the Actxa App Dashboard.
You are encouraged to take your measurements daily or minimally
once a week, to keep track of your body composition trending over
a period of time.
To take your body composi-
tion measurements, insert
the measuring handle cable
into the USB Type-C port on
the scale.
Step on the scale barefoot-
ed while holding the
measuring handle.
Taking Measurements

Efficient Use Of Your Scale
To ensure the accuracy of measurement, please follow the instructions
below during measurement
• Place the scale on a flat surface. Soft surface such as carpet will
affect the accuracy of the scale.
• Step onto the scale with bare feet. Stand still and keep full contact
with the electrodes until the measurement is complete.
• Start measurement at least 2 hours after waking up or dining.
• Avoid measurement immediately after strenuous exercise, sauna or
bath, drinking, and dining.
• Always start measurement in the same timeslot and on a flat,
hard surface.
• Always recalibrate the scale to ensure accurate result if it has been
moved or flipped upside down.
Step 1: Place the scale on a hard, flat surface.
Step 2: Step on the scale with one foot. Once the display lights up,
quickly step off the scale.
The scale will display “CAL” followed by “0.00” when the calibration
is completed.

Dimension: Scale: 320 x 300 x 21mm • Handle: 317 x 35 x 23mm
Net Weight: Approximately 1.93kg
Display: Digital LED
Measurement Unit: Kilogram/Pound
Measurement Range: 0.2kg to 180kg • 0.4lb to 394lb
Accuracy: 0~50kg (±0.2kg); >50~100kg (±0.3kg);
>100~150kg (±0.4kg); >150~180kg (±0.5kg)
Input: 5.0VDC, 500mA (Approximately 2 hours of charging)
Auto-Off: The Actxa Sense 2 smart scale will turn off after about
20 seconds if there is no operation
Protection Against Ingress Of Water: IPx3
Data Transmission: Bluetooth™and WiFi*
Measurement Method: Multi-segment dual frequency BIA Technology
Electrode Method: Tetrapolar 8-point Tactile Electrodes
Accessories: Type-C charging cable, User Guide
* WiFi support will be available via software update
Specifications

Caution & Safety Notes
The Actxa Sense 2 smart scale is intended for home-use only and is
not a medical device. Please note that all data should be used as a
reference and is not a substitute for medical advice from a licensed
healthcare professional. Do not self-diagnose or self-medicate on the
basis of this device without consulting your doctor. This device is for
healthy individuals over 13 years old. However, some body composition
indicators may require other minimum or maximum age requirements.
The Actxa Sense 2 smart scale uses Dual-band Bio-electrical Imped-
ance Analysis (BIA) technology, which generates a weak electrical
current at low frequency of 20kHz and high frequency of 100kHz that
passes through your body to make the various measurements. This
current is small (less than 50mA) and may not be felt. It is safe,
toxic-free and non-invasive.
However, the Actxa Sense 2 smart scale should NOT be used for
individuals who are pregnant or those wearing implantable electronic
devices (eg. Pace-maker).
Contraindications
1. This device is contraindicated for any female subjects who may be
suspected of, or is pregnant. Beside possibility of inaccurate
readings, there might be unknown implications on the fetus through
this device.
2. This device is contraindicated for any person who is connected to a
wearable or implantable electronic device or instruments such as a
pacemaker or defribillator.

Limited Product Warranty
The Actxa Sense 2 (The ‘Product’) is guaranteed against manufacturer’s
defects for a period of 1 year from the date of purchase. This warranty
only covers defects in material and workmanship. If the smart scale is
found to be faulty due to defects in materials and workmanship, the
authorized service provider will replace it with another Actxa Sense 2
smart scale.
The warranty does not cover normal wear and tear, excessive abuse, or
misuse and damage arising from failure to follow instructions relating
to the Product’s use. This Limited Warranty does not cover the services
provided by Actxa Pte Ltd or any 3rd party service provider rendered to
owners of the Product. All warranty claims must be accompanied by a
valid sales receipt.
Please visit actxa.com/support/ for more information

P/N› AW-S200-000-300
actxa.com
Complies with IDA Standards DA107472