ACU-RITE 200S READOUTS User manual

200S
Step-by-Step Instructions for Changing the Count Direction

200S: Changing Count Direction
Start with the unit off.
Or turn it off and wait 10 seconds before turning it back on.

200S: Changing Count Direction
From the home screen, press the “ENTER” key.

200S: Changing Count Direction
To change the count direction you don’t need to
reference the scale, so press the “NO REF” soft key.

200S: Changing Count Direction
When the axis is moved in the positive direction, the DRO shows a
negative number. Here’s how to change it.

200S: Changing Count Direction
Press the left soft key until the first
soft key menu space reads “SETUP.”
Soft
Key
Menu

200S: Changing Count Direction
Press the “SETUP” soft key.

200S: Changing Count Direction
Press the “INSTALL SETUP” soft key.

200S: Changing Count Direction
The DRO asks you for a “PASSCODE.”
Use the number soft keys and press:

200S: Changing Count Direction
Press “ENTER.”

200S: Changing Count Direction
“ENCODER SETUP” should be highlighted. If it isn’t, use the up or do
soft keys to highlight it, then press “ENTER.”

200S: Changing Count Direction
Use the up or do soft keys to highlight the input axis
you want to change. Then press “ENTER.”

200S: Changing Count Direction
Use the up or do soft keys to highlight the “COUNT DIRECTION”
box (shown on the next page).
This icon
shows you
how many
pages there
are in this
function
and which
page you
are on.

200S: Changing Count Direction
Press the “POSITIVE / NEGATIVE” soft key once to change the
count direction, then press “ENTER” to save your change.

200S: Changing Count Direction
Press the “C” soft key as many times as needed to
get back to the home screen.

200S: Changing Count Direction
Your DRO should now display the correct
count direction for your scale.