ACU-RITE 300S User manual

300S
Step-by-Step Instructions for Changing the Count Direction
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Start with the unit off.
Or turn it off and wait 10 seconds before you turn it back on.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
From the home screen, press the E key.
All manuals and user guides at all-guides.com

To change the count direction you don’t need to reference the scale,
so press the “NO REF” soft key.
300S: Changing Count Direction
All manuals and user guides at all-guides.com

300S: Changing Count Direction
When the axis is moved in the positive direction, the DRO shows a
negative number. Here’s how to change it.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press the soft key until the first
soft key menu space reads “SETUP.”
Soft
Key
Menu
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press the “SETUP” soft key.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press the “INSTALL SETUP” soft key.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
The DRO asks you for a “PASSCODE.”
Use the number soft keys and press:
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press
All manuals and user guides at all-guides.com

300S: Changing Count Direction
“ENCODER SETUP” should be highlighted. If it isn’t, use the u p or down
arrow soft keys to highlight it, and then press “ENTER.”
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Use the u p orown arrow soft keys to highlight the input axis
you want to change. Then press “ENTER.”
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Use the u p orown arrow soft keys to highlight the “COUNT DIRECTION”
box (shown on the next page).
This icon
shows you
how many
pages there
are in this
function
and which
page you
are on.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press the “POSITIVE / NEGATIVE” soft key once to change the
count direction, and then press “ENTE R” to save your change.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Press the “ C” soft key as many times as needed to return
to the home screen.
All manuals and user guides at all-guides.com

300S: Changing Count Direction
Your DRO should now display the correct
count direction for your scale.
All manuals and user guides at all-guides.com