ACU-RITE 01127 User manual

Instruction Manual
Digital Kitchen Scale
model 01127
CONTENTS
Package Contents .................. 2
Features & Benets................. 2
Setup .................................... 4
Install or Replace Batteries...... 4
Select Measurement Units....... 4
Using the Scale...................... 5
Troubleshooting ..................... 6
Care & Maintenance.............. 7
Specications......................... 7
Customer Support .................. 7
Questions? Contact Customer Support at
[phone] or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

(!)
ZERO
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Package Contents
1. Scale
2. Instruction Manual
Features & Benets
FRONT FRONT
1
1. Weighing Area
2. MODE Button
modes
3. Display
4. "
weight modes.
2
3
4
Press to toggle between weight
" Button
Push to turn scale ON/OFF or
select between Zero and Tare
2

Features & Benets
1
BACK BACK
1. Battery Compartment
2. UNIT Button
Push to choose Metric (g, ml) or
Imperial (lb:oz, 'oz) measurement
units.
3. Battery Compartment Cover
2
6
3
DISPLAY
1
2
3
4
DISPLAY
1. Tare Indicator
2. Zero Indicator
3. Minus Indicator
Indicates weight of item(s) removed
from scale
5
4. Weight Mode Indicator
Toggle between weight, water or milk
mode
5. Measurement Units
6. Current Weight
3

•
~
SETUP
Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. 1. Remove the battery compartment cover. 2. Insert 2 x AAA batteries into the battery compartment, as shown. Follow the
polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
2 Install Batteries
2 AAA alkaline batteries
Remove Battery Cover
1
Select Measurement Units To set the measurement units (Metric or Imperial), press and release the UNIT button, located on the bottom of the scale.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4

OPERATION
Using the Scale
Measure Weight
The scale's default mode is set to weigh solid items. Volume Mode, used
for weighing liquids, allows you to choose between WATER or MILK modes
because milk is denser than water. To weigh an item:
1. Place the scale on a at, stable surface.
2. Gently touch the center of the scale; wait for the display to show 0.
3. To set the mode, press and release the MODE button (toggle between
Weight, Water and Milk modes).
4. Place item to be measured within the center of the Weighing Area of
the scale.
5. Volume or weight will be shown on the display.
Weight Mode: Water Volume Mode: Milk Volume Mode:
g/kg/oz/lb ml/ oz ml/ oz
Zero & Tare Functions
To measure items as they are added, use the Zero and Tare Functions. If the
weight of the items being measured is below 4% of the scale’s capacity (less
than .04kg/0.9lb), the Zero function is used. If the weight of the items exceeds
4% of the scale’s capacity, the Tare function is used.
1. Place the rst item(s) within the center of the Weighing Area of the
scale to take a measurement.
2. Without removing the item(s), press the ZERO button to reset the
display to 0.
3. Depending on the weight of the item(s), you will see the Zero indicator
" " or the Tare indicator " " on the display.
4. With the rst item(s) still in place, add the next item to the surface of
the scale. The display will now show the weight of that item.
5. Press the ZERO button to see the combined weight of the two items.
6. Press ZERO button again to reset the display to 0.
7. Repeat these steps until all items have been added.
Note: Adhere to the maximum weight capacity of the scale.
5

<!)
ZERO
Lo I I E,-,-I
<!)
ZERO
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can
identify the value of a single item or ingredient by using the Minus Function:
1. Add item(s) to the scale; display shows total weight.
2. Press the ZERO button to reset display to 0.
3. Remove an item.
4. Display shows the weight of the removed item with the Minus Function
indicator (negative value is shown on the display).
5. Press the ZERO button to view cumulative weight of any remaining
items.
6. Repeat steps as needed.
Power Saving Mode
The scale will automatically power off if the displays shows "0" or the same
weight measurement is showing for 2 minutes. The scale can be manually
powered off by pressing the " " button. when the display shows "0". If the
scale is showing a weight measurement, press and HOLD the " " button for
3 seconds.
Warning Messages
A "Lo" message on the display screen indicates that the batteries will need to
be changed. A "Err" message on the display screen indicates that the maximum
weight capacity has been exceeded. To avoid damage, remove some weight
from the scale.
Troubleshooting
Problem Possible Solution
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.
6

Care & Maintenance
Store in a dry location at room temperature. Clean with a soft, damp cloth.
DO NOT immerse in water or use caustic cleaners or abrasives. All parts
should be wiped clean immediately after direct contact with foods. Avoid
contact with acids and citrus juices. Use the scale on a hard, at surface. DO
NOT strike, shake or drop the scale. Scale is not designed for commercial use.
Specications
MAX WEIGHT CAPACITY 5 kg / 11 lbs
MAX VOLUME CAPACITY 5000 ml / 168.7  oz
POWER 2 x AAA alkaline batteries
Customer Support
AcuRite customer support is committed to providing you with best-in-
class service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
[phone] [e-mail]
24/7 support at www.AcuRite.com
► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas
7

ACU ► RITE®
ACU ► RITE.
Weather Temperature Weather Kitchen Clocks
Stations & Humidity Alert Radio Thermometers
& Timers
It’s More than Accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with condence™.
www.AcuRite.com
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-
Printed in China rights are the property of their respective owners. AcuRite uses patented technology.
01127 INST 122314 Visit www.AcuRite.com/patents for details.