ADA INSTRUMENTS Robot Mini User manual

Operating manual
Laser distance meter
Model: Robot Mini
Manufacturer: ADAINSTRUMENTS Address: WWW.ADAINSTRUMENTS.COM

Robot Mini
Table of contents
1. Permitted use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Prohibited use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Laser classication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7. Operation and setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8. Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Appendix 1 - “Certicate of acceptance and sale”
Appendix 2 - “Warranty card”

Robot Mini
Congratulations on the purchase of laser distance meter ADA Robot Mini!
Permitted use
· Measuring distances
The safety regulations and instructions along with the operating manual should be read carefully
before initial operation.The person responsible for the instrument must ensure that equipment is
used in accordance with the instructions. This person is also accountable for the deployment of
personnel and for their training and for the safety of the equipment when in use.
Safety instructions
Please follow up instructions given in operators’ manual.
Do not stare into beam. Laser beam can lead to eye injury (even from greater distances).
Do not aim laser beam at persons or animals.
The laser plane should be set up above eye level of persons.
Use the instrument for measuring jobs only.

Robot Mini
Do not open instrument housing. Repairs should be carried out by authorized workshops only. Please contact
your local dealer.
Do not remove warning labels or safety instructions.
Keep instrument away from children.
Do not use instrument in explosive environment.
Prohibited use
- Using the instrument without instruction
- Using outside the stated limits
- Using the instrument in explosive environment (gas station, gas equipment, chemical industry and so on)
- Deactivation of safety systems and removal of explanatory and hazard labels
- Opening of the equipment by using tools (screwdrivers, etc.), as far as not specically permitted for
certain cases
- Carrying out modication or conversion of the product
- Don’t shoot at others with the laser intentionally

Robot Mini
- Don’t stare at the laser directly.
- Aiming directly into the sun
- Inadequate safeguards at the surveying site (e.g. when measuring on roads, construction sites, etc.)
- Using the instrument on the plane, near manufacturers, technological objects
Laser classication
The instrument is a laser class 2 laser product with power < 1 mW
and wavelength 650 nm.
Keypad
1 ON/Measuring
2 Clear/OFF
1
2

Robot Mini
TECHNICAL DATA
Range 0.05-30 m
Accuracy ±2 mm
Unit M
Continuous measurement YES
Display 2 Line display
Display illumination YES
Buzzer indication YES
Dust protection/Splash proof IP54
Battery type Type AAA 2 x 1.5V
Battery life Up to 5000 times
Laser class Class 2M II
Laser type 650 nm, < 1mW
Operating temperature 0°C to + 40°C
Storage temperature -10 °C to + 50°C
Auto laser switch-off After 30 seconds
Auto instrument switch-off After 3 min
Dimension 100x40x24 mm
Weight 75 g

Robot Mini
OPERATION AND SETTING
Switching on and off
Long press ON/DIST to switch on the device and laser.
Long press CLEAR/OFF to switch off the device when it’s on.
Clear
Press CLEAR/OFF once to cancel the last action or clear the historical data, while taking measurements.
Measuring
Press ON/DIST to activate the laser. Press again to trigger the distance measurement. The measured value is
displayed immediately.
Continious measurements
Press and Hold ON/DIST button more than 2 seс. The instrument will enter into the mode of continious
measurements. To quit this mode, press button CLEAR/OFF.

Robot Mini
PRECAUTIONS
Please, handle the instrument with care. Avoid viabrations and hits. During transportation put the instrument
into the soft bag. Note: the instrument should be dry!
Care and cleaning
Do not immerse the instrument in water. Wipe off dirt with a damp, soft cloth. Do not use aggressive cleaning agents
or solutions.
Specic reasons for erroneous measuring results
1) Measurements through glass or plastic windows; 2) Dirty laser emitting window; 3) After instrument has
been dropped or hit. Please check the accuracy. 4) Large uctuation of temperature: if instrument will be used
in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before
carrying out measurements.
Electromagnetic acceptability (EMA)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);

Robot Mini
will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities
or radio transmitters).
Laser classication
The instrument is a laser class 2 laser product accortding to DIN IEC 60825-1:2007. It is allowed to use unit
without further safety precautions.
Warranty
This product is warranted by the manufacturer to the original purchaser to be free from defects in material
and workmanship under normal use for a period of two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the
same or similar model at manufactures option), without charge for either parts of labour.
In case of a defect please contact the dealer where you originally purchased this product. The warranty will
not apply to this product if it has been misused, abused or altered. Without limiting the foregoing, leakage of
the battery, bending or dropping the unit are presumed to be defects resulting from misuse or abuse.

Robot Mini
Exceptions from responsibility
The user of this product is expected to follow the instructions given in operators’ manual.
Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry
out periodic checks of the product’s accuracy and general performance.
The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or
misuse including any direct, indirect, consequential damage, and loss of prots.
The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of
prots by any disaster (earthquake, storm, ood ...), re, accident, or an act of a third party and/or a usage in
other than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of prots due to
a change of data, loss of data and interruption of business etc., caused by using the product or an unusable
product.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of prots caused
by usage other thsn explained in the users’ manual.
The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or
action due to connecting with other products.