ADA INSTRUMENTS Shooter400 User manual

Operating manual
SHOOTER 400
Manufacturer Address .

SHOOTER 400
Table of contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Appearance of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4. Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Operation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7. Accessory List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Appendix 1- «Certicate of acceptance and sale»
Appendix 2- «Warranty card»

MEASUREMENT FOUNDATION
SHOOTER 400
3
The Laser range and speed nder monocular user’s guide
1. Introduction
The Laser range and speed nder monocular is a portable optoelectronic device combined a laser range
nder, a laser speed nder and a monocular in one. Its function includes:
1) Measure the distance of a stationary and slowly moving object within a certain range and can, at the same
time, observe the object with great clearness It possesses many advantages, such as a high accuracy,short
measuring time, low power consumption and automatic shutoff for power saving etc.
2) Measure the speed of fast moving object, and at the same time, can observe the object with great clear-
ness.
The transmission power of this device is very small and no harm to users’ eyes, any target can be measured
at random. It is compact, accurate in measure, light in weight, small in volume, very easy to operate and
carry about. One piece of CR2/3v battery is used which can be bought and changed easily.
The laser range and speed nder monocular can be widely used for travel, sightseeing, golf sports, hunt-
ing, camping as well as for any measurement of outdoor projects. It is a very good assistant to improve our
outdoor life quality.

SHOOTER 400
MEASUREMENT FOUNDATION
4
2. Appearance of the Device
Figure 1. Appearance of The Laser Range and Speed Finder Monocular
Eyepiece
Start Button
Mode Button
Laser Emitting / Telescope Lens
Laser Receiving Lens
Battery Housing

MEASUREMENT FOUNDATION
SHOOTER 400
6 ~ 400 m
0-300 km/h
905 nm
24 mm
16 mm
6X
7°
3.9 mm
±4
-20 ~ 50°C
±1 M (Y) ± 0.2%
±5 km/h
CR 2/3 V
185 g
104x72x41 mm
5
3.The Specications of the Laser Range and Speed Finder Monocular:
Measuring Range of Distance
Measuring Range of Speed
Laser type
Object lens size
Eyepiece size
Magnication
Field of view
Exit pupil diameter
Diopter adjust range
Operating temperatures
Range measure accuracy
Speed measure accuracy
Battery
Low Battery indicator
Net Weight
Dimensions

SHOOTER 400
MEASUREMENT FOUNDATION
6
4.The Description for the Built - in Liquid Crystal Display (LCD) of the Laser Range and Speed Finder
Monocular
Figure 2. LCD Indications
Ready
Range Speed
Quality > > > > > >
KMY / hS

MEASUREMENT FOUNDATION
SHOOTER 400
7
1). «Ready» - range nder or speed nder is ready
2).«Range» - range nder mode
3). «Speed» - speed nder mode
4).« » - Laser transmission indication
5).« » - Aiming indication, It is used for aiming the center of a target.
6).« » - Distance display will be in 4 gures.
If measurement is failed, then four dashes « - - - - » will appear.
7) .«KMY/ hS» - Distance and Speed unit indications. It shows «M» or «Y» in the «range nder mode», and
it shows «KM/h» or «M/S» in the «speed nder mode».
8). «Quality > > > > > >» - Distance quality indication.
9). « » - Low battery indication.

SHOOTER 400
MEASUREMENT FOUNDATION
8
5.The Laser Range and Speed Finder Monocular Operation Instructions
5.1 Adjust Telescope
Turn the eyepiece of the monocular until the target becomes clear.
5.2 Start
The Laser Range and Speed Finder Monocular has two buttons, they are «Start» button ( ) and «Mode»
button. Press « » button for about 1 second and the Laser Range and Speed Finder Monocular will start.
The LCD will display as follows Figure 3. :
Ready
Ready
Y
Figure 3

MEASUREMENT FOUNDATION
SHOOTER 400
9
5.3 How to operate the Laser Range Finder
The Laser Range and Speed Finder Monocular has two modes, they are «Range Mode» (default) and «Speed
Mode». Shortly press the «Mode» button and they can be shifted one another. When «Range Mode» is
chosen,”Range”character will appear on the top of the LCD. Shortly press the « » button and the distance
data will be displayed on the bottom of the LCD immediately.
If holding pressed the « » button, Scan measurement of distance starts. The new measured data will be
displayed on the bottom of the LCD ceaseless. After release the « » button, Scan will stop and the LCD will
return initiative state.
The laser indicator « » will blink when laser is transmitting.
In measuring the distance , If the reection of target is too weak,The LCD will display «- - - -». If the measure-
ment of distance succeed, «Quality > > > > > >» will appear on the bottom of the LCD. The more numbers of
« > », meaning stronger reection.
Six grades in all are set for the quality of reection. In measuring the distance, the LCD will display as follows
Figure 4.:

SHOOTER 400
MEASUREMENT FOUNDATION
10
Figure 4
Ready
Ready
Y 628
Quality > > > > > >
Ready
Ready
М 574
Quality > > > > > >

MEASUREMENT FOUNDATION
SHOOTER 400
11
5.4 How to operate the Laser Speed Finder. When «Speed Mode» is chosen, «speed» character will appear
on the top of the LCD. Shortly press the « » button and measurement of speed start.The speed data will be
displayed about 3 seconds later, otherwise it means the reection is too weak and the speed measurement is
failed,than LCD will display «----». During the period of speed measurement, always have to aim the moving
target .
When the target speed is being measured, the laser indicator « » will blink, afterward, the marker « > » on the
bottom of the LCD will keep moving, the target speed data will be displayed on the bottom of the LCD at last.
Users have to aim the moving target up to get the speed data and the direction of speed measurement needs
to be in line with the direction of the moving target as best as one can, otherwise the excessive included angle
will affect the veracity of the speed measurement as a result. In measuring the Speed. The LCD will display
as follows Figure 5. :
Figure 5
Ready
Speed
28. 9 M/S
Ready
Speed
104 KM/h

SHOOTER 400
MEASUREMENT FOUNDATION
12
5.5 How to shift the meaning length unit «M», «Y» - Meaning length unit, «M» means meter, «Y» means yard.
During the distance measurement period, you can change the measurement unit just by long pressing the
«Mode» button and it can be shifted «M» and «Y».
«KM/h», «M/S»- Speed unit indications. «KM/h» means kilometers per hour, «M/S» means meters per sec-
ond. During the period of speed measurement, you can change the measuring unit just by long pressing the
«MODE» button. When the speed unit is «M/S», the rst two numbers among the four digits are single and tens
digits, the third is radix point displayed as «-», the fourth digit is decimal, if the data is 12.8m/s, it is displayed
as «12_8M/S».
5.6 Automatic shut off for power
If the device idles over 20 seconds, it will automatically shut off.
5.7 Low battery indication
When « » appears, meaning the battery is insufcient and needs to be changed.

MEASUREMENT FOUNDATION
SHOOTER 400
13
6. Caution
6.1 The measuring distance of this laser range and speednder monocular has something to do with the target’s
character, transmitting beams with the angle of the target’s surface and the weather visibility. In general, if the sur-
face of the target is smooth, bright and large, the beams are upright to the surface of the target and the weather is
clear, the longer distance can be measured, whereas the shorter distance will be made by the device.
6.2 When « » (low battery indication) appears, battery should be changed in time, otherwise the measur-
ing errors will be increased. If the device is not used for a long time, it’s better to take out the battery from the
housing.
6.3 Never touch the surface of the lens so as to prevent the coating from damages during the course of
operation.
6.4 This device has been accurately aligned and adjusted with high precise equipments. Never disassemble
it at random.
6.5 If the external lens is stained, please clean it with the lens cloth attached to the device. Don’t use other
things so as to prevent the coating from damages.
6.6 Collision or high pressure should be avoided when carrying about or operating, keep it away from the re
and prevent corrosion as well.
6.7 Keep the device at a dry, cool and airy place and avoid dust, direct sunshine and extreme change of
temperature.

SHOOTER 400
MEASUREMENT FOUNDATION
14
6.8 If the device meets with a problem, send it to a professional department, never disassemble it by your-
selves.
7. The Accessory List of the Laser Range and Speed Finder Monocular:
Laser Range and Speed Finder, Colour Box, Wrist Strap, Soft Bag, User Manual, Drier, Lens Cloth
SHOOTER 400

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.
2. Periodic maintenance, repair or changing parts as a result of their normal runout.
3. All adaptations and modications with the purpose of improvement and expansion of normal sphere of product application,
mentioned in the service instruction, without tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence of the terms of
service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, pres-
ence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s
transportation and storing, warranty doesn’t resume.
For more information you can visit our website WWW.ADAINSTRUMENTS.COM
or write the letter with your questions on [email protected]

WARRANTY CARD
Name and model of the product ________________________________________________
Serial number ________________date of sale_______________________
Name of commercial organization _____________________stamp of commercial organization
Warranty period for the instrument explotation is 24 months after the date of original retail purchase. It extends to the equipment, imported
on the RF territory by ofcial importer.
During this warranty period the owner of the product has the right for free repair of his instrument in case of manufacturing defects.
Warranty is valid only with original warranty card, fully and clear lled (stamp or mark of thr seller is obligatory).
Technical examination of instruments for fault identication which is under the warranty, is made only in the authorized service center.
In no event shall manufacturer be liable before the client for direct or consewuential damages, loss of prot or any other damage which
occur in the result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no
complaints to the product quality. I am familiar with the conditions of qarranty service and i agree.
purchaser signature _______________________________
Before operating you should read service instruction!
If you have any questions about the warranty service and technical support contact seller of this product

Certicate of acceptance and sale
__________________________________________________________________________
__________________________________________________________________________
___________________________________________________________№_____________
name and model of the instrument
Corresponds to ______________________________________________________________
designation of standard and technical requirements
Data of issue _______________________________________________________________
Stamp of quality control department
Price
Sold ___________________________________ Date of sale ______________________
name of commercial establishment

Руководство по эксплуатации
SHOOTER 400
Производитель: ADAINSTRUMENTS Адрес: WWW.ADAINSTRUMENTS.COM

Оглавление
1. Описание . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Свойства . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Технические характеристики . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4. Начало работы . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5. Переключение единиц измерения . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6. Меры предосторожности. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Приложение 1 - «Свидетельство о приемке и продаже»
Приложение 2 - «Гарантийный талон»

SHOOTER 400
MEASUREMENT FOUNDATION
20
1. Описание
Лазерный дальномер и измеритель скорости - портативный оптико-электронный прибор объединяющий
функции оптического монокуляра, лазерного дальномера и датчика скорости.
Назначение:
Измерение расстояния неподвижного или медленного движущегося объекта в пределах определенного
диапазона.
Измерение скорости быстро двигающегося объекта.
Преимущества:
У этого прибора есть много преимуществ, таких как высокая точность, короткое время измерения,
низкий расход энергии, автоматическое отключение питания.
Мощность излучателя этого прибора невелика и является безопасной для глаз человека, поэтому он
может наводиться на любую цель.
Лазерный дальномер и измеритель скорости имеет широкий спектр применения; для путешествий,
ocмотpa достопримечательностей, в спорте, для гольфа, охоты и т.д.