ADC High Density Position Panel LSX 288 User manual

www.adc.com • [phone] • 1-800-366-3891
Spec Sheet
High Density LSX 288-Position Panel
Termination and Termination/Splice Configurations
ADC introduces the new high-density LSX 288-position panel available preterminated
with intrafacility (IFC) or outside plant (OSP) cables or in termination and splice configurations.
ADC’s 288-position LSX panel (with either SC or LC) offers integrated vertical cable guides
(VCG’s) within the panel, as well as on each side of the panel. VCG’s effectively segregate cables,
aiding in easy-to-follow routing paths. The angled bulkhead style panel offers additional protection
from bends that can increase attenuation and loss.
Features and Benefits:
Integrated cable management•
Angled bulkhead panel•
Vertical cable guides•
Available in SC and LC connector styles and multiple fiber cable styles•
288 terminations using either SC or LC connectors•
LSX 288-Position Preterminated Panel

8/08•106370AE High Density LSX 288 – Position Panel
2
www.adc.com • [phone] • 1-800-366-3891
High Density LSX 288-Position Panel
Preterminated Panels
Ordering Information
Connector style Cable Type Cable Length Catalog Number
SC/APC Ribbon-Indoor 16m(50')  LSX-LL/0WA016
SC/UPC Ribbon-Indoor 16m(50')  LSX-L7/0WA016
LC/APC Ribbon-Indoor 16m(50')  LSX-LM/0WA016
LC/UPC Ribbon-Indoor 16m(50')  LSX-LK/0WA016
SC/APC Stranded-Indoor 16m(50')  LSX-LL/0WB016
SC/UPC Stranded-Indoor 16m(50')  LSX-L7/0WB016
LC/APC Stranded-Indoor 16m(50')  LSX-LM/0WB016
LC/UPC Stranded-Indoor 16m(50')  LSX-LK/0WB016
Preterminated Panels
Ordering Information
Connector style Cable Type Cable Length Catalog Number
SC/APC Ribbon Diel- OSP 16m(50')  LSX-LL/0WC016
SC/UPC Ribbon Diel- OSP 16m(50')  LSX-L7/0WC016
LC/APC Ribbon Diel- OSP 16m(50')  LSX-LM/0WC016
LC/UPC Ribbon Diel- OSP 16m(50')  LSX-LK/0WC016
SC/APC Stranded Diel- OSP 16m(50')  LSX-LL/0WD016
SC/UPC Stranded Diel- OSP 16m(50')  LSX-L7/0WD016
LC/APC Stranded Diel- OSP 16m(50')  LSX-LM/0WD016
LC/UPC Stranded Diel- OSP 16m(50')  LSX-LK/0WD016
PreterminatedPanelsforCEV/CustomerPremiseLocations
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Specifications
Port Count: 288
Rack Units: 6
DIMENSIONS (H X W X D)
Preterminated: 279mmx584mmx305mm(11"x23"x12")
Termination/Splice: 279mmx584mmx381mm(11"x23"x15")
CABLE LENGTH
Preterminated: 16m(50')Standardconfigurationistwo-144-fibercables
Termination/Splice: 12-fiberpigtails

8/08•106370AE High Density LSX 288 – Position Panel
3
www.adc.com • [phone] • 1-800-366-3891
High Density LSX 288-Position Panel
Termination/Splice Panel
ADC’s 288-positon LSX panel is also available in a termination and splice configuration. While ADC
recommends off-frame splicing in high-density applications, often floor-space is limited and on-frame
splicingisrequiredinahighdensityenvironment.Ina18-inchdeepframe*,thispanelsolutionsaves
thevaluablerackspaceoftenrequiredforadedicatedsplicepanel.Panelscanbeorderedwith12-fiber
ribbonor12-fiberstrandedpigtails.Splicetraysandcableclampsareincludedwithinthepanel.
LSX 288-Termination and Splice Panel—Splicing in the rear eliminates rack space for a
dedicated splice point. Panel is shown here from front vantage (left) and back vantage (right)
Ordering Information
Connector style Pigtail Type Splice Type Catalog Number
SC/APC Ribbon-Indoor Mass Fusion  LSX-LL5243-A-SPL
SC/UPC Ribbon-Indoor Mass Fusion  LSX-L75243-A-SPL
LC/APC Ribbon-Indoor Mass Fusion  LSX-LM5243-A-SPL
LC/UPC Ribbon-Indoor Mass Fusion  LSX-LK5243-A-SPL
SC/APC Stranded-Indoor Heatshrink Fusion  LSX-LL1242-A-SPL
SC/UPC Stranded-Indoor Heatshrink Fusion  LSX-L71242-A-SPL
LC/APC Stranded-Indoor Heatshrink Fusion  LSX-LM1242-A-SPL
LC/UPC Stranded-Indoor Heatshrink Fusion  LSX-LK1242-A-SPL
Termination/Splice Panels
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
*Seepage5foradditionalaccessoriesthataccommodatethedeeperpanel.

8/08•106370AE High Density LSX 288 – Position Panel
4
www.adc.com • [phone] • 1-800-366-3891
ADC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
1
5
10
15
20
25
30
35
39
CABLE TIE
BRACKETS
660 mm
(26")
2.1 m (7')
203 mm
(8")
381 mm
(15")
3.4 m (11')
2" BUMPER GB
Panels/Frame Terminations/Frame Recommended Maximum Frame Lineup
51,440 4frames(5,760terminations)
Ordering Information
Description Dimensions (H x W x D) Catalog Number
High-DensityFrame(includes8"deepfronttroughs) 2.1mx660mmx381mm
(7'x26"x15")
 E-501-LGX-HD
InterbayManagementPanel(includes8"deep
troughs and spools)
2.1mx127mmx381mm
(7'x5"x15")
 E-501-L139-HD
288-Termination-Only Distribution Panel 279mmx584mmx305mm
(11"x23"x12")
Refer to previous
pages for catalog
numbers
EndGuard 2.1mx64mmx381mm
(7'x2.5"x15")
 RAC-7B0162
Recommended Patch Cord Lengths
The preterminated LSX-288 solution utilizes a traditional frame designed to fit a variety of termination,
splice and storage applications. This front load frame is built to ensure commonality with patch cord
routing, slack storage and fiber protection. It is shipped complete with top and bottom troughs.
Available accessories include interbay management panels (IMPs).
Density Recommendations
Number of Frames Approximate Patch Cord Length
15m(16.4')
26m(19.7')
36m(19.7')
47m(23')
High Density LSX 288-Position Panel
High-Density Distribution Solution (using 288-Termination-Only panel)

8/08•106370AE High Density LSX 288 – Position Panel
5
www.adc.com • [phone] • 1-800-366-3891
High Density LSX 288-Position Panel
High-Density Distribution Solution (using 288-Termination/Splice panel)
ADC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
Ordering Information
Description Dimensions (H x W x D) Catalog Number
High-DensityFrame(includes8"deepfronttroughs) 2.1mx660mmx381mm
(7'x26"x15")
 E-501-LGX-HD
FrameRearGuardBox
(rear 2-inch bumper should be
removed and replaced with this item)
660mmx127mm
(26"x5")
 RAC-0X0439
InterbayManagementPanel(includes8"deep
troughs and spools)
2.1mx127mmx381mm
(7'x5"x15")
 E-501-L139-HD
InterbayManagementPanelRearGuardBox
(rear 2-inch bumper should be
removed and replaced with this item)
127mmx127mm
(5"x5")
 RAC-0X0440
288-Termination/Splice Distribution Panel 279mmx584mmx381mm
(11"x23"x15")
Refer to previous
pages for catalog
numbers
EndGuard 2.1mx64mmx381mm
(7'x2.5"x15")
 RAC-7B0162
UniversalEndGuardExtender 2.1mx64mmx76mm
(7'x2.5"x3")
 E-501-12002
The termination and splice LSX-288 solution utilizes a traditional frame designed to fit a variety of
termination, splice and storage applications. This front load frame is built to ensure commonality with
patch cord routing, slack storage and fiber protection. It is shipped complete with top and bottom
troughs. Available accessories include interbay management panels (IMPs).
1
5
10
15
20
25
30
35
39
660 mm
(26")
2.1 m (7')
203 mm (8")
3.4 m (11' )
CABLE TIE
BRACKETS
457 mm (18")
5" GUARD BOX

8/08•106370AE High Density LSX 288 – Position Panel
6
www.adc.com • [phone] • 1-800-366-3891
High Density LSX 288-Position Panel
Homerun Splitter Solution
Ordering Information
Description Dimensions (H x W x D) Catalog Number
NetworkRackwith2"WECOmountingspaces
(shippedwith8-inchfrontguardbox)
2.14mx660mmx381mm
(7'x26"x15")
RAC-7A0501
FrameRearGuardBox*;(rear2-inchbumpershould
be removed and replaced with this item)
660mmx127mm
(26"x5")
RAC-0X0439
Interbay Management Panel 2.1mx127mmx381mm
(7'x5"x15")
E-501-L139-HD
InterbayManagementPanelRearGuardBox*
(rear 2-inch bumper should be removed and replaced
with this item)
127mmx127mm
(5"x5")
RAC-0X0440
EndGuard 2.1mx64mmx381mm
(7'x2.5"x15")
RAC-7B0162
UniversalEndGuardExtender* 2.1mx64mmx76mm
(7'x2.5"x3")
E-501-12002
288-Termination Distribution Panel 279mmx584mmx305/381mm
(11"x23"x12/15")
Refer to previous pages
for catalog numbers
Rack Mount Splitter Chassis – accommodates
upto24plugandplaysplitters
176mmx483/584mm
(7"x19/23")
FPS-MPPRACKMT24
Cable Management for Rack Mount Splitter Chassis 127mmx483/584mm
(5"x19/23")
FPS-MPPRACKMTCM
Parking Lot Panel for Rack Mounts
(accommodatesthree1x32splitteroutputs)
89mmx483/584mm
(3.5"x19/23")
ACE-ACC200-PKLT3
1x32PlugandPlaySplitterModulePlug-in FPS-MPP1AJJ
*usedonlywhentermination/splicepanelisloadedintoframe.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
ADC’s homerun splitter solution incorporates the LSX 288-position distribution panel along with plug
andplaysplittermodulesforcentralofficesplitting.Abletoeffectivelymanage1,152homeswithin
aseven-footframe,thissolutionoffersexcellentdensitywithADC’sbuilt-incablemanagement.In
addition, these same plug and play splitter modules are commonly used within ADC’s outdoor Fiber
Distribution Hubs (FDHs), allowing for easy-to-manage inventory with one splitter type versatile enough
for both inside and outside environments.
Parking Lot
Plug and Play
Splitters
Parking Lot
288-Termination
Panels
Plug and Play
Splitters
288-Termination
Panels

8/08•106370AE High Density LSX 288 – Position Panel
7
www.adc.com • [phone] • 1-800-366-3891
High Density LSX 288-Position Panel
OutsidePlantControlledEnvironmentActiveCabinetSolution
Ordering Information
Description Dimensions (H x W x D) Catalog Number
288-Termination or Termination/Splice
Distribution Panel
279mmx584mmx305/381mm
(11"x23"x12/15")
Refer to previous pages for
catalog numbers
FMT Bulk Storage Drawer 44mmx584mmx305mm
(1.75"x23"x12")
FMT-DBS000000-A00P2
ADC’s LSX-288 panels are also well suited to a controlled environment cabinet where limited rack space
and high termination counts are necessary. Used in conjunction with ADC’s Fiber Management Tray and
RiserGuide1on-demand cable management, this solution can meet both the termination demands, and
cable management requirement for a future-proofed network.
1FormoreinformationonRiserGuideon-demandcablemanagement,seeADCliterature#101573AE.
2FormoreinformationonFiberManagementTrays(FMTs),seeADCliterature#103743AE.
Fiber Management
Tray (FMT)
Active shelf
(not included)
LSX 288-panel

Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:[phone]
Fax:[phone]•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADCTelecommunications,Inc.,P.O.Box1101,Minneapolis,MinnesotaUSA55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
containedhereinmaybecoveredbyoneormoreU.S.orforeignpatents.AnEqualOpportunityEmployer
106370AE 8/08 Original © 2008 ADC Telecommunications, Inc. All Rights Reserved
Spec Sheet