ADC FlexWave MMX 6000 User manual

www.adc.com • [phone] • 1-800-366-3891
Spec Sheet
FlexWave™ MMX 6000
Pico WiMAX Base Station
The FlexWave™MMX 6000 is a member of the FlexWave MMX family of mobile WiMAX
broadband wireless access systems based on the 802.16e mobile standard.
The FlexWave MMX 6000 is a scalable, single-piece mini-base station that supports up to 512
subscriber units. It provides dedicated enhanced outdoor and in-building coverage and capacity,
and enables differentiated services in locations where increased coverage and capacity are needed.
The MMX Pico Base Station is WiMAX Forum Wave2 (MIMO) certified and is currently the smallest
base station on the market. The unit is light weight and can be installed by one person on poles,
street lamps or walls. The MMX 6000 can also be used to feed ADC’s InterReach®Fusion WiMAX
in-building Distributed Antenna System (DAS).
The FlexWave MMX 6000 provides all the functionality necessary to communicate with fixed and
mobile subscriber units according to the service criteria and customer Service Level Agreements
(SLAs). It includes various network interfaces for flexible integration into the wireless operator’s
network backbone. The end-to-end Quality of Service (QoS) ensures that the same high quality
WiMAX experience is delivered to customers outside or inside his/her home or small office.
The MMX 6000 is supported by ADC’s FlexWave NMS management system.
Features
Lowest cost pico base station for lower OPEX and CAPEX•
Small size – one man installation•
Limited output power for outdoor or in-building WiMAX Access Point•
Supporting 2.X, 3.X GHz bands•

9/08•106978AE FlexWave
™MMX 6000
FlexWave™ MMX 6000
Pico WiMAX Base Station
2
www.adc.com • [phone] • 1-800-366-3891
MMX 6000 Highlights
Mobile-WiMAX compliance based on IEEE 802.16e standard and Wave2 (MIMO) certification•
Support of worldwide WiMAX deployments in the 2.X and 3.X GHz band (special frequencies•
available upon order)
Install anywhere – for coverage of holes in wireless deployments and increased capacity issues•
Limited output power – ideal for both outdoor and indoor installations•
Scalable architecture supporting up to 512 subscribers on the same unit•
Quality of Service (QoS) for reliable, best-in-class wireless coverage and capacity delivering the same•
high quality WiMAX experience inside the home/office
Adaptive modulation to optimize throughput and facilitate performance robustness•
Ecosystem compatibility with any FlexWave product or 802.16e standard compliant WiMAX•
network equipment

9/08•106978AE FlexWave
™MMX 6000
FlexWave™ MMX 6000
Pico WiMAX Base Station
3
www.adc.com • [phone] • 1-800-366-3891
Specifications
RADIO AND MODEM
Frequency: MMX 6125-205: 2496 to 2690 MHz
MMX 6135-205: 3300 to 3800 MHz
Sectors: 1
Radio Access Method: IEEE802.16-2005 (16e OFDMA)
Compatibility: WiMAX Forum Wave 2 Profile
Operation Mode: TDD
Channel Bandwidth: 3.5Mhz,5MHz,7MHz,10MHz
Frequency Resolution: 0.25 MHz
Antennas: External Antenna Ports
Number of Antennas Default Antenna: 2
Antennas Connectors: 2x N-Type, 50 Ohm, lightning protected
Diversity Support: 2x2, STC/MIMO-SM
Output Power per Sector[P1dB]: 2 x 500 mW
Output Power (average): 27dBm+/-1dBmaximum
FFT/Modulation: 512/1024 FFT points; QPSK, 16QAM, 64QAM
FEC: Convolution Code and Turbo Code
TPC: 15dB
Synchronization: GPS or IEEE1588 (optional)
NETWORK INTERFACES
Network: 1. 40.5-60VDC
2. 10/100BaseT
Half/Full Duplex IEEE 802.3 CSMA/CD Fiber Optic - optional
ASN GW Compatibility: WiMAX Forum R6 Profile C, Compatible with CISCO ASN-GW,
WiChorus SC Family
CONFIGURATION AND MANAGEMENT
Management: SNMP
SNMP Agent: SNMP ver 2 client: MIB II
(RFC 1213)
Private ADC MIBs
Software Upgrade: FTP
Remote Configuration: FTP
MECHANICAL
Dimensions [HxWxD]: 24 x 20 x 4 cm
  9.5"x7.8"x1.6"
Weight: < 4 kg / 8.8 lbs
POWER INTERFACE
Input: 48VDC
Power Consumption: 39 Watt
ENVIRONMENTAL
Operating Temperature: -40°Cto+55°C
Operating Humidity: 5%-95% non condensing, weather protected
STANDARDS COMPLIANCE
EMC: FCC Part 15, Subpart B ,Class A ETSI EN 301489-1/4
Safety: TUV-UL 60950-1 IEC 60950-1
Environmental: ETS 300 019:
Part 2-1 T 1.2 & Part 2-2 T 2.3
Part 2-4 T 4.1E
IP66
Immunity: EN61000-4-2
EN61000-4-4
EN61000-4-5
Radio: FCCPart27ETSIEN302326

Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:[phone]
Fax:[phone]•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106978AE 9/08 Original © 2008 ADC Telecommunications, Inc. All Rights Reserved