ADJ 1226100374 User manual

User Instructions
VIZI WASH Z37

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of this document may be
available online.
Please check www.adj.com for the latest revision/update of this manual before beginning installation
and/or programming.
©2021ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and
instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying
product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection
claimed includes all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this document may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of
their respective companies.
ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and operation
of this product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device uses and can radiate radio frequency energy and, if not installed and used in accordance with
the included instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the following methods:
· Reorient or relocate the device.
· Increase the separation between the device and the receiver.
· Connect the device to an electrical outlet on a circuit different from which the radio receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for help.
10/09/19 1 1.0 14/16/17/71 Initial Version
Date Document
Version
Software
Version > DMX Channel Mode Notes
12/19/19 1.2 1.3 14/15/17/18/72 DMX Channel Modes Updated
10/21/20 1.31.514/15/17/18/38/72 DMX Channel Modes Updated
04/28/21 1.4N/C No Change Updated Specifications and Dimensional Drawings

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 2
Vizi Wash Z37 Table of Contents
Introduction
Features I Warranty Registration
Safety Guidelines
External Light Exposure
Installation
Overview
DMX Set Up
DMX Addressing
DMX Channel Modes
Color Macro Chart
System Menu
Pixel Zone Layout
Target Modes
Dimmer Curve Chart
Error Codes
Dimensional Drawings
Multiple Unit Power Linking I Fuse Replacement
Trouble Shooting I Cleaning
Limited Warranty (USA Only)
Technical Specications
3
4
5
6
7
10
11
12
13
35
37
44
45
46
47
48
49
49
50
51

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 3
Vizi Wash Z37 Introduction
Unpacking: Thank you for purchasing the Vizi Wash Z37 by ADJ Products, LLC. Every Vizi Wash Z37
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit
has arrived intact. In the case damage has been found or parts are missing, please contact our toll free
customer support number for further instructions. Do not return this unit to your dealer without rst
contacting customer support.
Introduction: The ADJ Vizi Wash Z37 is a DMX intelligent, high powered, moving head fixture. To optimize
the performance of this product, please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. This product is intended to be used by professionally trained
personnel only and is not suitable for private use.
These instructions contain important safety information regarding the use and maintenance of this
unit. Please keep this manual with the unit, for future reference.
Customer Support: Contact ADJ Service for any product related service and support needs. Also visit
forums.adj.com with questions, comments or suggestions.
Parts: To purchase parts online visit:
http://parts.adj.com (US)
http://www.adjparts.eu (EU)
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: [phone] | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: [phone] | Fax: [phone] | [email protected]
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone]
www.adj.eu | [email protected]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
[phone]
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Vizi Wash Z37 Features
• Electronic Dimming 0-100%
• DMX-512 protocol
• Multiple DMX Channel Modes
• Locking 3-Pin and 5-Pin XLR Connectors In/Out
• Pixel Zone Control
• Zoom Adjustment
• Gamma Adjustment
• 6 Dimmer Curves With Dimmer Adjustment Speed
• Multiple Unit Power Linking (See page 39)
Included:
1 x Locking Power Cable
2 x Omega Brackets
Vizi Wash Z37 Warranty Registration
The Vizi Wash Z37 carries a 2 year limited warranty. Please fill out the enclosed warranty card to
validate your purchase. All returned service items whether under warranty or not, must be freight pre-
paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on
the outside of the return package. A brief description of the problem as well as the R.A. number must
also be written down on a piece of paper included in the shipping carton. If the unit is under war-
ranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by
contacting our customer support team on our customer support number. All packages returned to the
service department not displaying a R.A. number on the outside of the package will be returned to the
shipper.
ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 4

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 5
Vizi Wash Z37 Safety Guidelines
• DO NOT TOUCH the fixture housing during operation. Disconnect the power and allow approximately
15 minutes for the fixture to cool down before servicing.
• DO NOT shake the fixture, avoid brute force when installing and/or operating the fixture.
• DO NOT operate the fixture if the power cord has become frayed, crimped and/or damaged. If the
power cord is damaged, replace immediately with a new one of similar power rating.
• DO NOT Do not attempt to remove or break off the ground prong from the electrical cord. This
prong is used to reduce the risk of electrical shock and fire in case of an internal short.
• DO NOT attempt to operate this unit, if it becomes damaged.
• DO NOT spill water or other liquids into or on to your unit.
• This unit is intended for indoor use only, use of this product outdoors voids all warranties.
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
• Disconnect from main power before making any type of connection.
• DO NOT block any air ventilation slots. All fan and air inlets must remain clean and never blocked.
Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
• During the initial operation of this fixture, a light smoke or smell may emit from the interior of the
xture. Thsi is a normal process and is caused by excess paint in the interior of the casing burning
o from the heat. This will decrease gradually over time.
• DO NOT remove the cover under any conditions. There are no user serviceable parts inside.
• When installing fixture in a suspended enviroment, always use mounting hardware that is no less
than M10 x 25mm, and always install fixture with an appropriately rated safety cable.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 39
for cleaning details.
• Heat -The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the fixture.
C. The fixture has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a marked change in performance.
E. The fixture has fallen and/or subjected to extreme handling.

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 6
Vizi Wash Z37 External Light Exposure
POTENTIAL INTERNAL FIXTURE DAMAGE FROM EXTERNAL SOURCES OF LIGHT BEAMS
External sources of light beams from direct sunlight, lighting moving head xtures, and lasers, which
are focused directly towards the exterior housing and/or penetrate the front lens opening of ADJ
lighting xtures, can cause severe internal damage including burning to optics, dichroic color lters,
glass and metal gobos, prisms, animation wheels, frost lters, iris, shutters, motors, belts, wiring,
discharge lamps, and LEDs.
This issue is not specic only to ADJ lighting xtures, it is a common issue with lighting xtures
from all manufacturers. Although there is no true way to fully prevent this issue from happening, the
guidelines below can prevent any potential damage from occurring if followed. Contact ADJ Service
for more details.
DO NOT EXPOSE THE FIXTURE AND/OR FRONT LENS OPENING TO LIGHT BEAMS FROM DIRECT
SUNLIGHT, OTHER LIGHTING MOVING HEAD FIXTURES, AND LASERS WHILE UNPACKING,
INSTALLATION, USE, AND EXTENDED IDLE TIMES OUTDOORS.
DO NOT FOCUS A LIGHT BEAM FROM ONE LIGHTING FIXTURE DIRECTLY TOWARDS ANOTHER.

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 7
Vizi Wash Z37 Installation
FLAMMABLE MATERIAL WARNING
Keep xture at least 5.0 feet (1.5m) away from any ammable materials,
decorations, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections
and/or installations.
CAUTIONS
• For added protection, mount the xture in areas outside walking paths, seating areas, or in are
were unauthorized personnel might reach the xture.
• Ambient operating temperature range for this xture is 14° to 104°F. (-10° to 40°C). Do not place
this lighting xture in an enviroment where the temperatures are under or above the temperatures
stated above. This will allow the xture to run at its best and help prolong the xture life.
• Before mounting the xture to any surface, make sure the installation area can hold a minimum
point load of 10 times the weight of the xture.
• Fixture installation must always be secured with a secondary safety attachment, such as an appropriate
safety cable.
• Never stand directly below the device when mounting, removing or servicing.

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 8
Vizi Wash Z37 Installation
CLAMP INSTALLATION
Screw one clamp via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners of
the Omega bracket into the respective holes of the xture base plate. NOTE: The clamp must be
attached to the Omega Bracket before attaching the bracket to the xture. Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through one of the two rigging points located on
the bottom of the unit and over the trussing system or a safe xation spot. Insert the end in the cara-
bine and tighten the safety screw. NOTE: It is easier to pull the safety-cable through the rigging
points before attaching the Omega brakets.
SAFETY CABLE
RIGGING POINT
SAFETY CABLE
RIGGING POINT
OMEGA BRACKET
ATTACHMENT POINTS
OMEGA BRACKET
QUICK-LOCK
FASTENERS
CLAMP
(Not Included)
1
2
OMEGA BRACKET
QUICK-LOCK
FASTENERS
CLAMPS
(Not Included)
SAFETY CABLE
3

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 9
Vizi Wash Z37 Installation
The Vizi Wash Z37 is fully operational in three dierent mounting positions, hanging upside-down,
mounted sideways on trussing, or set on a at level surface. Be sure this xture is kept at least 12m
(40ft) away from any ammable materials (decoration etc.). Always use and install the supplied safety
cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails
(see next page). Never use the carrying handles for secondary attachment.
OVERHEAD RIGGING
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
without any deformation. When installing the unit must be secured with a secondary safety attachment,
e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or
servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 10
Vizi Wash Z37 Overview
1. LED Lens Array
2. MENU Button
3. ENTER Button
4. LCD Menu Control Display
5. DOWN Button
6. UP Button
7. Service Port
8. Locking 3/5-Pin XLR Connectors In/Out
9. Locking 3/5-Pin XLR Connectors In/Out
10. Locking Power Connectors In/Out
11. Fuse Holder
1
2 3 4 5 6
10987 11

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 11
Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator
on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-
nected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the
female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.
Vizi Wash Z37 DMX Set Up
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication
between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from
the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the
DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a
DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of dierent manufactures to be
linked together and operate from a single controller, as long as all xtures and the controller are DMX
compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use
the shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed
anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is
assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that
unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX Operation): The Vizi Wash Z37 can be controlled via
DMX-512 protocol. Your unit and your DMX controller requires either a 3-pin or 5-pin XLR connector for data
input and data output. We recommend Accu-Cable DMX cables. If you are making your own cables, be
sure to use standard 110-120 Ohm shielded cable (This cable may be purchased at almost all pro light-
ing stores). Your cables should be made with a male and female XLR connector on either end of the
cable. Also remember that DMX cable must be daisy chained and cannot be split.

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 12
Vizi Wash Z37 DMX Addressing
DMX ADDRESSING
All fixtures should be given a DMX starting address when using a DMX controller, so the correct fixture responds to the
correct control signal. This digital starting address is the channel number from which the fixture starts to “listen” to the
digital control signal sent out from the DMX controller. The assignment of this starting DMX address is achieved by setting
the correct DMX address on the digital control display on the fixture.
You can set the same starting address for all fixtures or a group of fixtures, or set different addresses for each individual
fixture. Setting all fixtures to the same DMX address will cause all fixtures to react in the same way, in other words,
changing the settings of one channel will affect all the fixtures simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen” to the channel number you have set, based
on the quantity of DMX channels of each fixture. That means changing the settings of one channel will only affect the
selected fixture.
In the case of the Vizi Wash Z37, when in 14 Channel you should set the starting DMX address of the first unit to 1, the
second unit to 15 (14 + 1), the third unit to 29 (15 + 14), and so on. (See the chart below for more details.)
Channel Mode Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
14 Channels115 29 43
16 Channels
117 33 49
17 Channels
118 35 52
71 Channels
172 143 214
Channel Mode Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
14 Channels115 29 43
15 Channels
116 31 46
17 Channels
118 35 52
18 Channels
119 37 55
72 Channels
173 145 217
SOFTWARE VERSION <V1.0
SOFTWARE VERSION 1.3 - 1.4
SOFTWARE VERSION > 1.5
Channel Mode Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
14 Channels 115 29 43

15 Channels 116 31 46

17 Channels 118 35 52

18 Channels 119 37 55
173 145 217

72 Channels
38 Channels 13977115

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 13
Vizi Wash Z37 DMX Channel Modes
1PAN MOVEMENT 8-BIT
2PAN FINE 16-BIT
3TILT MOVEMENT 8-BIT
4TILT FINE 16-BIT
Functions
71 Channels Values
RED ALL 0%-100%000-255
000-255
000-255
000-255
000-255
GREEN ALL 0%-100%000-255
BLUE ALL 0%-100%000-255
WHITE ALL 0%-100%000-255
RED (ZONE 1) 0%-100%000-255
GREEN (ZONE 1) 0%-100%000-255
BLUE (ZONE 1) 0%-100%000-255
WHITE (ZONE 1) 0%-100%000-255
1
3
16 Channels
14 Channels
1
2
2
4
5
7
6
8
3
5
4
6
17 Channels
1
2
3
4
COLOR MACROS (ZONE 1)
Open
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Color 31
Color 32
Color 33
000-009
010-017
018-024
025-032
033-039
040-047
048-054
055-061
062-069
070-076
077-084
085-091
092-099
100-106
107-113
114-121
122-128
129-136
137-143
144-151
152-158
159-165
166-173
174-180
181-188
189-195
196-203
204-210
211-217
218-225
226-232
233-240
241-247
248-255
000-255 64 COLORS MACROS
See the Color Macro charts on pages 25-26
5
6
7
8
7 9 10
9
5
6
7
8
9
ADJ VIZI WASH Z37
DMX Channel Values & Functions
Supports Software Version < 1.0
Features subject to change without notice
*Pixel Zones and control of effects depends on head orientation and Pan/Tilt settings*

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 14
Vizi Wash Z37 DMX Channel Modes
10
11
12
13
Functions
71 Channels Values
000-255
000-255
000-255
000-255
000-255
000-255
000-255
RED (ZONE 2) 0%-100%
000-255
GREEN (ZONE 2) 0%-100%
000-255
BLUE (ZONE 2) 0%-100%
WHITE (ZONE 2) 0%-100%
16 Channels14 Channels 17 Channels
COLOR PRESETS (ZONE 2)
See Channel 9 (71 Channel Mode)
14
RED (ZONE 3) 0%-100%
GREEN (ZONE 3) 0%-100%
BLUE (ZONE 3) 0%-100%
WHITE (ZONE 3) 0%-100%
000-255 COLOR MACROS (ZONE 3)
See Channel 9 (71 Channel Mode)
15
000-255
000-255
000-255
000-255
RED (ZONE 4) 0%-100%
GREEN (ZONE 4) 0%-100%
BLUE (ZONE 4) 0%-100%
WHITE (ZONE 4) 0%-100%
000-255 COLOR MACROS (ZONE 4)
See Channel 9 (71 Channel Mode)
000-255
000-255
000-255
000-255
000-255
000-255
000-255
RED (ZONE 5) 0%-100%
000-255
GREEN (ZONE 5) 0%-100%
000-255
BLUE (ZONE 5) 0%-100%
WHITE (ZONE 5) 0%-100%
COLOR MACROS (ZONE 5)
See Channel 9 (71 Channel Mode)
RED (ZONE 6) 0%-100%
GREEN (ZONE 6) 0%-100%
BLUE (ZONE 6) 0%-100%
WHITE (ZONE 6) 0%-100%
000-255 COLOR MACROS (ZONE 6)
See Channel 9 (71 Channel Mode)
000-255
000-255
000-255
000-255
RED (ZONE 7) 0%-100%
GREEN (ZONE 7) 0%-100%
BLUE (ZONE 7) 0%-100%
WHITE (ZONE 7) 0%-100%
000-255 COLOR MACROS (ZONE 7)
See Channel 9 (71 Channel Mode)
000-255
000-255
000-255
000-255
RED (ZONE 8) 0%-100%
GREEN (ZONE 8) 0%-100%
BLUE (ZONE 8) 0%-100%
WHITE (ZONE 8) 0%-100%
000-255 COLOR MACROS (ZONE 8)
See Channel 9 (71 Channel Mode)
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 15
Vizi Wash Z37 DMX Channel Modes
45
46
47
48
Functions
71 Channels Values
000-255
000-255
000-255
000-255
000-255
000-255
000-255
RED (ZONE 9) 0%-100%
000-255
GREEN (ZONE 9) 0%-100%
000-255
BLUE (ZONE 9) 0%-100%
WHITE (ZONE 9) 0%-100%
16 Channels14 Channels 17 Channels
COLOR MACROS (ZONE 9)
See Channel 9 (71 Channel Mode)
49
RED (ZONE 10) 0%-100%
GREEN (ZONE 10) 0%-100%
BLUE (ZONE 10) 0%-100%
WHITE (ZONE 10) 0%-100%
000-255 COLOR MACROS (ZONE 10)
See Channel 9 (71 Channel Mode)
000-255
000-255
000-255
000-255
RED (ZONE 11) 0%-100%
GREEN (ZONE 11) 0%-100%
BLUE (ZONE 11) 0%-100%
WHITE (ZONE 11) 0%-100%
000-255 COLOR MACROS (ZONE 11)
See Channel 9 (71 Channel Mode)
50
51
52
53
54
55
56
57
58
59

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 16
Vizi Wash Z37 DMX Channel Modes
Functions
71 Channels Values16 Channels14 Channels 17 Channels
COLOR MACROS (ALL ZONES)
Open
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Color 31
Color 32
Color 33
Open
Clockwise Fast-Slow
Stop
Counter-Clockwise Slow-Fast
Open
Random Colors Fast Speed
Random Colors Medium Speed
Random Colors Slow Speed
Open
000-009
010-014
015-019
020-024
025-029
030-034
035-039
040-044
045-049
050-054
055-059
060-064
065-069
070-074
075-079
080-084
085-089
090-094
095-099
100-104
105-109
110-114
115-119
120-124
125-129
130-134
135-139
140-144
145-149
150-154
155-159
160-164
165-169
170-174
175-179
180-201
202-207
208-229
230-234
235-239
240-244
245-249
250-255
60
000-255 BASE COLORS
See Channel 9 (71 Channel Mode)
61

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 17
62
Functions
71 Channels Values16 Channels14 Channels 17 Channels
BLOCK MACROS
Blackout
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
000-007
008-022
023-037
038-052
053-067
068-082
083-097
098-112
113-127
128-142
143-157
158-172
173-187
188-202
203-217
218-232
233-247
248-255
SHUTTER & STROBE
LEDs Off
LEDs On
Strobing Slow-Fast
LEDs On
Pulse Effect in Sequences
LEDs On
Random Strobing Slow-Fast
LEDs On
000-031
032-063
064-095
096-127
128-159
160-191
192-223
224-255
MASTER DIMMER
0%-100%
000-255
DIMMER FINE000-255
ZOOM WIDE-NARROW000-255
ZOOM FINE000-255
63108 11
64119 12
651210 13
661311 14
67
Vizi Wash Z37 DMX Channel Modes

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 18
Vizi Wash Z37 DMX Channel Modes
681412
Functions
71 Channels Values16 Channels14 Channels 17 Channels
15
DIMMER MODES & DIMMER SPEED
Standard
Stage
TV
Architectural
Theatre
Stage 2
DIMMER DELAY TIME
0.1Sec.
0.2Sec.
0.3Sec.
0.4Sec.
0.5Sec.
0.6Sec.
0.7Sec.
0.8Sec.
0.9Sec.
1.0Sec.
1.5Sec.
2.0Sec.
3.0Sec.
4.0Sec.
5.0Sec.
6.0Sec.
7.0Sec.
8.0Sec.
9.0Sec.
10Sec.
Default to Unit Setting
000-020
021-040
041-060
061-080
081-100
101-120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141-255
COLOR BLOCK MACRO SPEED
Slow-Fast
000-255
PAN/TILT SPEED
Fast-Slow
000-255
SPECIAL FUNCTIONS
Null
Blackout with Pan/Tilt Enabled
Blackout with Pan/Tilt Disabled
Null
Zoom Reset
Reset All
Null
Pan/Tilt Reset
Null
000-069
070-079
080-089
090-189
190-199
200-209
210-219
220-229
230-255
701513 16
711614 17
69

ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 19
Vizi Wash Z37 DMX Channel Modes
1PAN MOVEMENT 8-BIT
2PAN FINE 16-BIT
3TILT MOVEMENT 8-BIT
4TILT FINE 16-BIT
Functions
72 Channels Values
RED ALL 0%-100%000-255
000-255
000-255
000-255
000-255
GREEN ALL 0%-100%000-255
BLUE ALL 0%-100%000-255
WHITE ALL 0%-100%000-255
1
3
17 Channels
15 Channels
1
2
2
4
5
7
6
8
3
5
4
6
18 Channels
1
2
3
4
5
6
7
8
000-035
036-040
041-045
046-050
051-055
056-060
061-065
066-070
071-075
076-080
081-085
086-090
091-095
096-100
101-105
106-110
111-115
116-120
121-125
126-130
131-135
136-140
141-145
146-150
151-155
156-160
161-165
166-170
171-175
176-180
181-185
186-190
191-195
196-200
201-205
206-210
211-215
216-220
221-225
226-230
231-235
236-240
241-245
246-250
251-255
COLOR TEMPERATURE (LINEAR)
Null
2700K
2800K
2900K
3000K
3100K
3200K
3300K
3400K
3500K
3600K
3700K
3800K
3900K
4000K
4100K
4200K
4300K
4400K
4500K
4600K
4700K
4800K
4900K
5000K
5100K
5200K
5300K
5400K
5500K
5600K
5700K
5800K
5900K
6000K
6100K
6200K
6300K
6400K
6500K
6600K
6700K
6800K
6900K
7000K
7 9 9 60
14 Channels
1
2
3
5
4
6
8
ADJ VIZI WASH Z37
Supports Software Version 1.3 - 1.4
Features subject to change without notice
*Pixel Zones and control effects depends on head orientation and Pan/Tilt settings*