Adobe 22011302 User manual

Adobe®
Audition® 3.0 Read Me
Welcome to Adobe® Audition®. This document contains late-breaking product information,
updates, and troubleshooting tips that may not be covered in the Audition Documentation.
Minimum system requirements
Serial Numbers
Install your software
Activating your software
Install your Loopology content
Uninstall your software
Registration information
Known issues
Customer care
Other resources
Minimum system requirements
•Intel® Pentium® 4 (1.4GHz for DV, 3.4GHz for HDV); Intel Centrino®; Intel Xeon® (dual
Xeon 2.8GHz processors for HD); or Intel Core™ Duo or compatible processor (SSE2-
enabled processor required for AMD systems)
•Microsoft® Windows® XP Professional or Home Edition with Service Pack 2 or Windows
Vista® Home Premium, Business, Ultimate, or Enterprise (certified support for 32-bit
editions only)
•512MB of RAM (1GB for DV playback; 2GB for HDV and HD playback)
•10GB of available hard-disk space (when used with Loopology DVD)
•DVD drive required for installation
•1,280x900 monitor resolution with 32-bit video card and 16MB of VRAM
•Microsoft DirectX or ASIO compatible sound card
•QuickTime 7.0 required to use QuickTime features
•Internet or phone connection required for product activation
The latest information on system requirements can be found at
http://www.adobe.com/products/audition/systemreqs/
Serial Numbers
Adobe Audition 3.0 uses a 24-digit serial number. If you purchased the product on CD, the serial
number can be found on your registration card or on the back of your CD ROM case. If you
downloaded the software electronically from the Web, the serial number is on the receipt page that
confirms your purchase (a copy of the receipt page is e-mailed to you). For software downloads
purchased through Adobe, you can also view the product's serial number in your Order History
section of the Adobe Web site. Note: Do not use the number on the bottom of the Adobe Audition
box.

When installing a new version of Adobe Audition 3.0, you will be required to enter the serial
number. If you are installing an upgrade and the installer cannot find the previous version on your
hard drive, you will need to enter both the new 24-digit serial number that was included with the
upgrade and the serial number from your previous version.
If your serial number does not work, please contact Adobe Customer Support:
www.adobe.com/support/main.html
Install your software
•Make sure that your computer meets the system requirements for Adobe Audition 3.0. The
system requirements are listed on the Adobe Audition 3.0 box and in this ReadMe file.
•Before you install, close all applications currently running on your system—including other
Adobe applications, Microsoft Office applications, and browser windows.
•The installer requires that you enter the serial number. The serial number is located on the
application CD or, if you downloaded the software electronically from the Web, it is on the
receipt page that confirms your purchase (a copy of the receipt page is e-mailed to you).
For software downloads, you can also view the product’s serial number in your Order
History section of the Adobe web site if you purchased the software through Adobe.
To install Adobe Audition 3.0:
1. Do one of the following:
oIf you are installing Adobe Audition 3.0 from a CD, insert the application CD into
your CD drive. If the installer starts automatically, follow the on-screen instructions
to install the application. If the installer does not start automatically, double-click
Audition 3.0 Setup.exe in the Adobe Audition CD folder, and then follow the on-
screen instructions to install the application.
oIf you downloaded Adobe Audition 3.0 from the Web, the installer should start
automatically when the download completes. If it doesn’t, double-click Audition 3.0
Setup.exe in the Adobe Audition 3.0 folder you downloaded. Follow the on-screen
instructions to install the application.
To start Adobe Audition 3.0:
Choose Start > All Programs > Adobe Audition 3.0.
Activating your software
You need to activate your copy of Adobe Audition 3.0 within 30 days of installing the software. You
can activate your copy by using your Internet connection or by calling customer service.
Activation is a series of simple and quick steps users of Adobe Audition take upon installation in
order to begin using the application. Product activation is built in to help Adobe prevent copying of
the software onto more than the number of computers permitted by the license agreement
governing the software.
You can choose the activation process you prefer: by Internet, by phone using the 24-hour
automated Adobe Software Activation System, or by phone speaking directly with a Customer
Care Representative. If you’ve activated more than two times using your Internet connection, you’ll
need to activate by phone.

During the activation process, you’ll provide Adobe with the randomly-generated activation number
given to you. Because each activation code and serial number is unique, Adobe can compare the
numbers from your activation request with our database to help ensure that your copy of the
software has not been activated more times than allowed under its license agreement.
When you need to activate
Adobe's activation system offers you a choice on when and how to activate. Adobe offers a 30-
day grace period during which you can use the software without activating. There are activation
reminders during the grace period. After the 30-day grace period you will not be able to use the
software until you activate.
Some circumstances may require you to activate again. If you replace or reformat your computer’s
hard drive, you may need to activate again on that computer. You may also need to activate again
if you uninstall Adobe Audition. There are two uninstall options. Advanced Uninstall removes all
components of the software, requiring you to activate again when you reinstall. If you uninstall
using the Standard option, you won’t need to activate again (certain activation related files and
information remain on your computer).
How activation information is used
The unique serial number assigned to each copy of Adobe Audition is combined with a randomly
generated number, assigned to your computer. Adobe's activation system does not transmit, or
collect, any personal information, including your hardware configuration.
Activation is separate from product registration, which is optional. Registration is for those
customers who want to receive information about product updates and other special offers from
Adobe. Adobe stores registration and activation information on separate secure servers, and there
is no linking of these sets of data.
Note: No personal information is collected by Adobe Systems when you activate your software. No
information about your use of the product or the files you create with the product is provided to
Adobe Systems. Data necessary for activation is sent to Adobe Systems only at the time of
activation.
To activate Adobe Audition:
1. Start Adobe Audition. (If you’ve just installed the software, the Activation screen appears
automatically.)
2. When the first Activation screen appears, do one of the following:
•If Adobe Audition detects an Internet connection, a message appears on the screen asking
if you would like to activate over the Internet. Click Next to start the Internet activation
process.
•If Adobe Audition does not detect an Internet connection, or if you want to activate by
phone or at a later time, click Other Activation Options.
3. If you clicked Other Activation Options, do one of the following:
•Choose Over The Internet, and then click Next to start the activation process immediately.
A status screen lets you know how it’s progressing. If you’re having trouble, try activating
by telephone.
•Choose By Telephone Via The Automated Software Activation System to begin phone
activation. Click Next to bring up a screen with the Adobe Customer Service phone

•Choose Remind Me if you want to delay the activation process by a few days. Choose a
reminder option from the pop-up menu, and then click Next. You still need to activate
within 30 days if you choose this option.
Install your Loopology content
To install your Loopology content:
1. Make sure Adobe Audition 3.0 is already installed by following the installation instructions.
2. Do one of the following:
oIf you are installing the Loopology content from the Loopology DVD, insert the
DVD into the DVD drive. If the DVD contents pop up automatically, double click on
the Loopology folder and then double click setup.exe and follow the on-screen
instructions to install the Loopology content. If the DVD contents do not pop up
automatically, browse your DVD with a file explorer, double click on the Loopology
folder and then double click setup.exe and follow the on-screen instructions to
install the Loopology content.
oIf you downloaded the Loopology content from the Web, the installer should start
automatically when the download completes. If it doesn’t, double-click Setup.exe
in the Adobe Audition Loopology Content folder you downloaded. Follow the on-
screen instructions to install the application
Uninstall your software
1. Before you uninstall, close all applications currently running on your system—including
other Adobe applications, Microsoft Office applications, and browser windows.
2. Open the Windows Control Panel and double-click Add or Remove Programs (for
Windows XP), or Programs and Features (for Windows Vista). Select Adobe Audition 3.0,
click Change/Remove, and then follow the on-screen instructions to remove your software.
Registration information
When you install your software, be sure to register to get up-to-date product information, training,
newsletters, and invitations to Adobe events and seminars.
Known issues
In order to provide you with the most up to date information, please refer to the online Audition
Release Notes for a list of all known issues.
Windows Vista: Deactivation option is not offered when uninstalling from Windows Vista
If you would like to uninstall Audition 3.0 and use it on a different machine, you can do so by using
the Transfer Activation feature. This feature allows you to remove your product activation from one
machine in order to activate on another. On Windows XP, this is offered as an option during the
uninstall process; however on Windows Vista you must perform this transfer before uninstalling the
application:

1. Open Audition 3.0.
2. Go to Help > Transfer Activation.
3. Follow the steps to complete the process.
4. Uninstall Audition 3.0.
Windows Vista: Installing Adobe Audition 3.0 from the MSI file results in an activation error
on launch
If you run the Adobe Audition 3.0.msi file in Windows Vista, Audition will install, but when you try to
launch, you will receive the following error:
"Current user account does not have the privileges to perform product activation.
Run this application from a user account with administrative privileges or contact
your system administrator."
To fix this issue, either:
1. Run the Audition 3.0 Setup.exe file to install instead of running the .msi file.
2. If you have already installed, repair the installation from the Uninstall command in the
Windows Control Panel.
Windows Vista: AERO: "Enable Desktop Composition" causes dropouts during recording.
Due to increased video and CPU processing used by the Windows Vista "AERO" feature,
recording while this is enabled may produce some dropouts, especially with computers that are
close to the minimum system requirements, recording at higher sample rates and bit depths,
and/or while recording in any of the spectral viewing modes (frequency, pan, or phase).
To help remedy this, you can record using waveform view only. If you still get dropouts, you can
also disable the AERO feature called "Desktop Composition" under Windows Vista performance
options:
1. Open Control Panel.
2. Double-click "System."
3. Click "Advanced System Settings."
4. Under visual Effects, un-check the box next to "Enable Desktop composition."
5. Click Apply, and then click OK.
Enabling Live Preview of MIDI Sequencer:
In order to preview VSTi audio and MIDI Input while idle, users must perform two steps:
1. MIDI Tracks must be set to "Live Monitoring" mode by clicking the green "L" button located
in the track controls panel in Multitrack. It is in the same location as the "Record Enable"
button is located on Audio tracks.
2. Set Monitoring Mode, located in the Session Properties panel, to "Audition Mix." This
enables the internal Audition mixing engine to process VSTi output without the need to be
in a record or playback state.
Adobe Bridge CS3 cannot be installed from a network location
Adobe Bridge CS3 is included with Adobe Audition 3.0 and can be installed in the following ways:

1. Install from CD: You can click the Adobe Bridge icon from the Autoplay menu or browse to
the Adobe Bridge CS3 folder on the CD.
2. If you downloaded your copy of Audition 3.0, you can run the Bridge installer from the
Adobe Bridge CS3 folder.
The stand-alone installer for Adobe Bridge CS3 cannot be installed from a network location. You
will receive an error message asking you to insert Adobe Bridge CS3 when a network install is
attempted and the process will fail. If you have the Adobe Bridge CS3 folder stored in a network
location, please copy the folder to a local hard drive in order to properly install the application.
Notes:
•If you already have Adobe Bridge CS3 installed there is no need to install it again. Audition
3.0 will be able to use the version that was previously installed.
•After installing Bridge CS3 we suggest that you launch Bridge and go to Help > Updates to
download and install the latest version.
ASIO driver vs. Audition Windows Sound
For the highest level of compatibility, Adobe Audition 3.0 automatically assigns your default
Windows sound card as its default inputs and outputs. If your audio hardware supports the ASIO
driver model, we recommend that you choose it in the Audio Hardware setup dialog instead of the
Audition Windows Sound, as this will give improved performance in most cases.
There is a known issue with the ASIO driver for the Creative Audigy line of sound cards where,
when Audition closes, the ASIO driver does not release itself and Audition remains running in
memory and visible as a running process in the Windows Task Manager. To prevent this issue with
these cards, leave the hardware setup set to Audition Windows Sound.
CD burning
Some CD-RW drives cannot handle writing ISRC and UPC/EAN values. If your attempt to write
fails, try to uncheck the Write CD-Text box in the Write CD dialog and uncheck the ISRC box in the
Track Properties dialog for every track in the CD Project View.
For some CD-RW drives, an incorrect write speed is displayed in the CD Device Properties dialog
and you will be unable to change the setting. In these cases, the CD will be burned at the
maximum possible speed for the drive.
The maximum number of Index Cues per track supported by Adobe Audition is 98.
Extract Audio from CD
The default mode for CD audio extraction is SPTI. It is recommended that you do not use ASPI
due to known problems with different versions of ASPI drivers. For more details, visit the Adobe
Audition Support site.
Only silence will be extracted when the Buffer Size setting in the Extract Audio from CD dialog is
greater than 128 KB when using SPTI mode for CD audio extraction. Use 128 KB or lower to work
around this problem.
ReWire

To launch an application in ReWire slave mode, you first need to launch Adobe Audition, enable
ReWire, and then select the ReWire slave application. Then click on the Launch button to start the
Rewire slave application. Some ReWire slave applications do not support being launched via
ReWire and nothing will happen when you click the Launch button. For these applications, start the
slave application through normal means after enabling ReWire in Adobe Audition, such as the
Windows Start > Programs menu. Once the ReWire application is then launched, it will
automatically be in Slave mode.
Adobe Audition does not support multiple tempos within a single session. If your ReWire slave
application uses a session that contains multiple tempos, Adobe Audition will not respond to the
tempo changes.
Changes made to tempo and time signature within a ReWire slave application will not be reflected
in Adobe Audition. However, changes made to the session tempo or time signature in Adobe
Audition will be reflected in the ReWire slave application.
Snap to frames behavior
In Multitrack View, it is possible to set your snapping behavior to frames by right-clicking on the
timeline, and selecting Snap to Frames (Always). This allows the cursor to snap to a frame
boundary, as long as the time format is measured in frames (such as Compact Disc and SMPTE).
This command is especially handy for working on audio for CD. It is important to note that the
frames in use here are audio frames, not video frames.
Saving when file is open in Adobe Premiere Pro
When attempting to save a change to an audio file in Adobe Audition that is also loaded in Adobe
Premiere Pro, you may see an error that states: "File is probably in use by another application.
Please close the other application and try saving again." In this case, the file is still being read by
Adobe Premiere Pro in order to conform the audio. You will need to wait until the audio from the
file is conformed in Adobe Premiere Pro before saving the changes to the file. A progress bar in
the lower right corner of the Adobe Premiere Pro application window displays that status of the
audio conform.
Customer care
Customer Service
Adobe Customer Service provides assistance with product information, sales, registration, and
other non-technical issues. To find out how to contact Adobe Customer Service, please visit
Adobe.com for your region or country and click on Contact.
Support Plan Options and Technical Resources
If you require technical assistance for your product, including information on free and paid support
options and troubleshooting resources, more information is available at
http://www.adobe.com/go/support/. Outside of North America, go to
http://www.adobe.com/go/intlsupport/. Free troubleshooting resources include Adobe’s support
knowledgebase, Adobe user-to-user forums and more.
If you are having any issues with installing or uninstalling, please try rebooting your system prior to
contacting Support.
Other resources

Visit the Adobe Audition page on the Adobe Systems Incorporated Web site:
www.adobe.com/audition. You will find links to tutorials, user groups, third-party plug-in
developers, Adobe Customer Support, and more.
Documentation
Order printed documentation at www.adobe.com/go/buy_books.
© 2007 Adobe Systems Incorporate. All rights reserved.