Ads-tec Itc8113 tabx User manual

Updated 2017-06-23

Instruction manual

Tablet PCs

ITC8113 / TabX®

Version 1.7

Translation of the original

instruction manual

ITC8113 / TabX® 2

Table of Contents

1Notes.......................................................................................................................................5

1.1 General remark 5

1.2 Limitation of liability 5

1.3 Manufacturer 5

1.4 Relevant device documentation 6

2Safety instructions ...................................................................................................................7

2.1 Structure of safety instructions 7

2.2 Graduation of risk level 7

2.3 Explanation of used symbols 7

2.4 Symbols 8

2.5 Data, figures and modifications 8

2.6 Trademarks 8

2.7 Copyright 9

2.8 Environmental conditions 10

2.9 Standards 11

2.10 Scope of delivery 12

2.11 Features of the ITC8113 13

2.12 External dimensions ITC8113 15

3Operating and safety instructions ...........................................................................................16

3.1 Operating location 17

3.2 Damage due to improper use 17

3.3 Warranty / repairs 17

3.4 Intended use 17

3.5 Improper use 18

3.6 Treatment and disposal of lithium batteries 18

3.6.1 BIOS battery 18

3.6.2 Stick-style battery 19

3.7 Cleaning the device 19

4Commissioning.......................................................................................................................20

4.1 Procedure 20

ITC8113 / TabX® 3

5Operation ..............................................................................................................................21

5.1 Full HD display 21

5.2 10-finger multifunction touch-screen 22

5.3 Front status LEDs 23

5.4 Front panel operation keys 25

5.5 Landscape/portrait function 28

6Interfaces...............................................................................................................................29

6.1 Power supply via the power adapter 30

6.2 Power supply via stick-type batteries 31

6.3 USB interfaces 33

6.4 Network connection (RJ45) 34

6.5 Microphone 35

6.6 Speakers 36

7Wireless.................................................................................................................................37

7.1 WLAN 37

7.2 Bluetooth 38

7.3 UMTS / LTE (optional) 38

8Drives ....................................................................................................................................39

8.1 Hard disk / Flash SSD 39

8.2 External drives 39

9Software ................................................................................................................................40

9.1 Configuration Center 40

10 Technical details ..................................................................................................................41

10.1 Technical details of the ITC8113 41

10.2 Technical details of the stick-type batteries 42

ITC8113 / TabX® 4

11 Accessories..........................................................................................................................43

11.1 Transport case (optional) 43

11.2 Battery charging station (optional) 44

11.3 Replacement power adapter (optional) 49

11.4 Vehicle power adapter (optional) 49

11.5 Replacement battery (optional) 50

11.6 Rotatable and tiltable wall table adapter (optional) 51

11.7 Set-up mechanism 53

11.8 3-point strap (optional) 54

11.9 Hand strap (optional) 59

11.10 Protection cover (optional) 61

12 Component replacement .....................................................................................................62

12.1 Opening the service slot 62

12.2 Changing the mass storage device 64

12.3 Replacing the lithium battery 65

13 Service & support ................................................................................................................66

13.1 ADS-TEC support 66

13.2 Company address 66

ITC8113 / TabX® 5

1 Notes

1.1 General remark

This instruction manual is intended to ensure safe and efficient handling and operation of IT

Infrastructure products.

The instruction manuals must be read carefully by personnel before commencing any type of

work.

All of the safety notices and handling instructions given in the manual must be obeyed in order

to ensure that work is carried out safely.

Operation of the system is subject to the laws and regulations which are applicable in the

respective country at national, federal, European and international level.

The generally accepted rules of technology, usually in the form of standards, directives,

regulations, conditions and technical rules specified by national and federal organisations as

well as trade associations and committees for the field of specialisation concerned, shall apply.

Figures used in this instruction manual are provided for basic understanding and may differ

from the actual design.

The operator/operating company is independently responsible for compliance with and

observance of any subsequently introduced technical innovations or new legal requirements,

as well as for all usual obligations of the operator/operating company.

The original version of this instruction manual was written in German. All non-German versions

of this instruction manual are translations of the German instruction manual.

1.2 Limitation of liability

ADS-TEC GmbH shall not be liable for personal injury, property damage or damage caused to

the device as well as consequential damage that is/was the result of non-compliance with this

instruction manual, improper use of the device, repairs and other actions on the device by

unqualified electricians and electricians not certified by ADS-TEC, or that is/was the result of

using unapproved replacement parts. Failure to observe the maintenance intervals shall also

result in exclusion from liability.

Furthermore, it is strictly forbidden to make any unauthorised alterations or technical

modifications to the device.

1.3 Manufacturer

The manufacturer of the product is ADS-TEC GmbH. The company is referred to in the

following as ADS-TEC.

ITC8113 / TabX® 6

1.4 Relevant device documentation

The following documents are decisive to device setup and operation:

Instruction manual:

Contains information for installation, commissioning and operation of the device along with

technical data of the device hardware.

Website

You can download drivers, software, user manuals, leaflets and flyers from the Download

section of our website www.ads-tec.de.

ITC8113 / TabX® 7

2 Safety instructions

2.1 Structure of safety instructions

The signal word classifies the hazard.

Reference to the type/consequences and source of the hazard is made underneath the signal

word.

Instructions for preventing the hazard are identified by an arrow ().

SIGNAL WORD

Type/consequences of hazard!

- Source of hazard

Measures to prevent hazard

2.2 Graduation of risk level

The signal word classifies the hazard.

Instructions for preventing the hazard are identified by an arrow ().

2.3 Explanation of used symbols

DANGER

Indicates an imminent danger. If not avoided,

death or severe injury will result.

WARNING

Indicates a possible danger. If not avoided,

death or severe injury could result.

CAUTION

Indicates a possible danger. If not avoided,

light or minor injuries could result.

ITC8113 / TabX® 8

ATTENTION

Indicates a possibly damaging situation. If

not avoided, the system or something in its

surroundings could be damaged.

Recommendation for use:

The symbol "Recommendation for use" indicates terms and/or

conditions that strictly need to be observed to ensure optimised and/or

zero-defect operation. Tips and suggestions for the efficient use of the

device and software optimisation are also provided.

2.4 Symbols

Symbol

Meaning

Designation of batteries in accordance with § 13 of the

German Battery Act (BattG). Batteries may not be

disposed of with household waste, but must rather be

disposed of separately. Used batteries must be returned to

the point of sale or a disposal system.

Labelling of electrical and electronic devices in accordance

with § 7 of the German Electrical and Electronic

Equipment Act (ElektroG). Electrical and electronic

devices must not be disposed of with household waste,

but must rather be taken to a collection point for waste

electrical equipment. Such a collection point is generally

operated by public waste management authorities, i.e., by

municipalities.

Symbol for the protective earth connection

2.5 Data, figures and modifications

All data, text and figures were prepared to the best of our knowledge. They do not represent

any assurance for the properties themselves. Despite taking utmost care, no liability can be

assumed for accuracy, completeness and actuality of the information. Subject to changes.

2.6 Trademarks

It is noted that any software and/or hardware trademarks and any company brand names

mentioned in this documentation are all subject to the general trademark protection rights.

StoraXe®, TabX® and Big-LinX® are registered trademarks of ADS-TEC.

All other third-party trademarks used are hereby acknowledged.

In the case of infringement of trademark rights, ADS-TEC reserves the right to exercise all

rights.

ITC8113 / TabX® 9

2.7 Copyright

This instruction manual is protected by copyright. For the authorised user, simple usage rights

are granted within the scope of the intent of the contract. Any modified use or exploitation of

the provided content, particularly duplication, modification or publishing in whatever form is

permitted only with the prior consent of ADS-TEC.

In the case of copyright infringement, ADS-TEC reserves the right to exercise all rights.

ITC8113 / TabX® 10

2.8 Environmental conditions

The device can be put into operation and used under the following conditions. Failure to

observe any one of these conditions will invalidate the warranty. ADS-TEC cannot be held

liable for any damages arising from improper use and handling.

Temperature for ITC8113

in operation 0 … +40°C

for storage -20 to +60°C

Humidity

in operation 10 … 85% without condensate

for storage 10 … 85% without condensate

Vibration

in operation environmental class 7M3

2G, 2 –500 Hz

(DIN EN 60721-3-7)

Shock resistance

in operation environmental class 7M3

30 G, with a sinusoidal half-wave of 11 ms

(DIN EN 60721-3-7)

ITC8113 / TabX® 11

2.9 Standards

The manufacturer hereby declares that this device has been marked with

the CE mark in accordance with the basic requirements and other relevant

conditions of the following European Directives:

2011/65/EU, RoHs Directive

2014/30/EU, EMC Directive

2014/53/EU, RED Directive

2014/35/EU, Low Voltage Directive

The product is a class B device.

A corresponding EU conformity declaration is available for competent authorities at

the manufacturer and can be viewed upon request.

The EU conformity declaration can be requested at

http://www.ads-tec.de/support/support-anfrage.html and is available for download

at http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.

Recommendation for use:

For full compliance with the EMC legislation, all components and

cables used for device connection must also be compliant with these

requirements. It is therefore necessary to employ BUS and LAN

cables with shielded connectors and these must be installed as per

the instructions contained in the instruction manual.

ITC8113 / TabX® 12

2.10 Scope of delivery

Check the contents of the package for completeness and for any damages:

Should the device have evident signs of damages caused, e.g., by improper operation or

storage conditions or due to improper use or handling, the device and accessories must be

shut down immediately. Ensure that they are secured against being started up accidentally.

1 x device

1 x power adapter 20VDC

2 x stick-style battery

QuickStartGuide

Optional scope of delivery:

ITC8113 accessories acc. to delivery note

ITC8113 / TabX® 13

2.11 Features of the ITC8113

The industrial tablet computer from ADS-TEC has been consistently further developed for

professional and mobile use.

High performance, brilliant Full HD display and optimised for applications in service

environments –

the new TabX- ITC8113 scores high marks both for indoor and outdoor use.

Front side

Fig.

No.

Description

HD display with 10-finger touch-screen

(1920 x 1080 pixels)

Monocoque frame

Status LEDs

Front keys with lighting

ITC8113 / TabX® 14

Rear side

Fig.

No.

Description

Battery ejector

Set-up mechanism

Service slot

Docking connector

ITC8113 / TabX® 15

2.12 External dimensions ITC8113

Fig.

ITC8113 / TabX® 16

3 Operating and safety instructions

The device operates under electrical voltage and contains highly sensitive components.

Intervention by the user is required only for connecting the power supply lines. Should any

further modifications be required, it is necessary to consult either with the manufacturer

directly or with service personnel authorised by the manufacturer. The device must be de-

energised during work. Appropriate measures must be taken to prevent electrostatic

discharges on components. If the device is opened up by an unauthorised person, the user

may be subject to hazards and the warranty is invalidated.

General information

All users must read this manual and have access to it at all times.

Installation, commissioning and operation may only be performed by qualified

and trained personnel.

The safety notices and the manual itself must be observed by all persons who

work with this device.

At the installation site the valid guidelines and regulations for accident

prevention must be observed.

The manual contains the most important instructions on how to use this device

in a safe way.

Appropriate storage, proper transport, installation and commissioning, as well as

careful operation are prerequisites for ensuring safe and proper operation of the

device.

The device can be cleaned by using a soft cloth and a commercially available

glass cleaning agent (e.g. Sidolin) with low alcohol content.

ATTENTION

To prevent damage to the device, all cable

lines (power supply, interface cables) must

be only be connected while the device is

switched off.

ITC8113 / TabX® 17

3.1 Operating location

The device is optimised for use with applications in a service environment.

Make certain that the specified environmental conditions are maintained at all times. Use in

non-specified environments, i.e., on board ships, in explosive atmospheres or at extreme

elevations, is prohibited.

ATTENTION

The device may only be switched on after

acclimatising to the ambient temperature in

order to avoid condensate accumulation.

This also applies if the device is exposed to

extreme temperature fluctuations.

To avoid overheating in operation:

The device must not be exposed to direct radiation by sunlight or any other light source.

3.2 Damage due to improper use

Should the device have evident signs of damages caused, e.g., by improper operation or

storage conditions or due to improper use or handling, the device must be shut down

immediately. Ensure that it is secured against being started up accidentally.

3.3 Warranty / repairs

During the device warranty period, any repairs must only be performed by the manufacturer or

by service personnel that has been authorised by the manufacturer.

3.4 Intended use

The device is used for diagnostics, visualisation and control of a wide range of processes in a

service environment, among other places. The device is designed for indoor and outdoor

applications.

The device is only to be assembled, installed and operated within the permissible

specifications.

ITC8113 / TabX® 18

3.5 Improper use

Operation other than or beyond that described for the device shall be deemed improper use.

The device is not allowed to be used to control vehicles or for applications for which further

approvals beyond the manufacturer's declaration are necessary, e.g. applications with

explosion hazard, medical technology, shipping industry.

The device must not be put into operation in the case of transport damage or nonconformity

with the specifications and, if necessary, must be taken out of operation in the case of

changing conditions.

In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or

damage that is directly or indirectly attributable to the handling of the device.

3.6 Treatment and disposal of lithium batteries

3.6.1 BIOS battery

This device contains a lithium battery for supplying the system clock with power as long as the

supply voltage is not connected. The battery has a life cycle of 3 - 5 years depending on which

load is applied.

ATTENTION

The more the battery is exposed to higher

temperatures, the faster it ages.

WARNING

Danger of explosion if using incorrect battery

types.

WARNING

Lithium batteries should not be exposed to

fire, soldered, recharged, opened, short-

circuited, reversed or heated above 100 °C

and they should be disposed of properly as

well as protected against sunlight, moisture

and condensation.

ITC8113 / TabX® 19

Lithium batteries may only be replaced by the same type, or by a type recommended by the

manufacturer.

The used lithium battery should be disposed of in accordance with local legal regulations.

3.6.2 Stick-style battery

The defective stick-style batteries are to be disposed of in accordance with the valid legal

regulations.

ATTENTION

Damage due to electrostatically sensitive

components

Damage to the device can be caused by

electrostatically sensitive components.

All installation and service work performed

on the device must be performed only under

safe, secure and de-energised conditions.

Recommendation for use:

Always adhere to the safety measures applicable when handling

components at risk of being damaged by electrostatic discharges.

The provisions of DIN EN 61340-5-1 / DIN EN 61340-5-2 apply

3.7 Cleaning the device

For cleaning we recommend applying a cleaning agent for household use.

Additionally, we have tested the following disinfectant: Meliseptol® produced by B. Braun

Melsungen AG. It can be used following the recommendations for use and dosage indicated

by the manufacturer.

ITC8113 / TabX® 20

4 Commissioning

The power supply connection and the interfaces on the device are located on the side of the

housing. All supply leads and all required data leads have to be connected before

commissioning.

ATTENTION

The device must be switched off before

connecting or disconnecting any cables in

order to prevent damage to the electronics!

The device may only be switched on after

acclimatising to the ambient temperature in

order to avoid condensate accumulation.

Make sure to meet the permissible voltage

for this device.

After switching off and before switching on

you must wait for at least 5 seconds.

Recommendation for use:

The shielding of a data cable must always be connected with the connector

housing (EMC).

For embedded operating systems, the interfaces must be explicitly

enabled and the necessary drivers installed in order to use them.

Recommendation for use:

When using accessories, proceed according to chapter Accessories.

4.1 Procedure

/Dat entechnik/Inbetrie bnahme/Reihenf olge der Inbetriebnah me/Reihenfolge der In betriebnahme für VMT 6 0xx-Serie @ 1\m od_12220731591 79_6.doc @ 4100 @

Pos: 19 /Datentechni k/Inbetriebnahme/Betri ebsbereitschaft prüfen/ Betriebsbereitschaft prüf enf ür OPC/CPC/PLC/OTC /ITC/VMT-Serie(+M onitore) / IPC 5100/5500/ 2400/1100 @ 0\mod_115 8905578361_6.doc @ 38 1@

No.

Description

Check for operational readiness

Check the battery charge state

(see chapter Battery operation)

Insert battery into the device and snap

into place

(see chapter Battery operation)

Connect power adapter (if necessary)

Start the device (ON/OFF

pushbutton) and activate in the operating

system by entering the licence