ADS Technologies USBAV-708 INSTANT VIDEOMPX User manual

Capturing with Windows Media Encoder using the Instant VideoMPX
After starting Windows Media Encoder, select "Capture Audio or Video" when the "New Session" window appears and click "OK".
Under "Device Options", ensure that "Instant VideoMPX" and "Instant VideoDVX" are selected for the Video and Audio source.

Click the "Configure" button next to "Video"

Select either "Video Composite" or "Video SVideo" in the "Inputs" drop-down list. Choose the one that is appropriate for your capture
source.
Click on "Video Properties".
Under the tab named "Video Proc Amp" click the button labeled "Default" then click ok.

On the page labeled "Output File", select the desired name and location of the output video file.

On the page labeled "Content Distribution", select how you will distribute the output video file.
On the page labeled "Encoding Options", Select your desired Video and Audio qualities then click finish.

*Click on "Start Encoding" once you are ready to start capturing.

When you have arrived at the end of your capture, click "Stop".
The "Encoding Results" windows will appear. Click on "Play Output File" to view what you have captured.

*PLEASE NOTE: Audio will not be heard while capturing only while playing back the resultant output file.