Advanced Technology International USA M200 Series Operating and safety instructions

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M200 Series Copier Controller
Product Overview
The M200 Series Copier Controller accepts one coin to vend one copy. That coin can
be a nickel (M205), dime (M210) or quarter (M225).
The M200 Series Controller's housing - similar to a tall and narrow "breadbox" -
allows for easy mounting on any of its three non-faceplate sides.
The M200 Series Controller runs safely off the low signal voltages of its attached
copier, and comes standard with both a copier specific sprig and bypass keyswitch.
Technical Specifications
• Accommodates 5 VDC to 30 VDC signals from copier
• Rugged tubular lock
• $70 cashbox capacity
• Dimensions: 16.5" x 5.75" x 6"
• Weight: 12 lb
Warranty
The M200 is warrantied against manufacturing defects for a period of one year from
date of shipment, to be determined by the serial number on the inside of its housing.
To honor legitimate warranty claims, Advanced Technologies (TekVend) agrees to
repair or replace at its discretion any M200 Series Controller found defective for
manufacturing defects within the warranty period specified. Advanced Technologies
(TekVend) additionally agrees to pay ground return shipping and insurance on these
warranty repairs or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. Installer
is expected to use the original copier specific harness (sprig) supplied by Advanced
Technologies (TekVend), and install the M200 on the originally specified copier,
unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M6000 CreditVendCopier / Printer Controller
Product Overview
The M6000 CreditVendCopier / Printer Controller accepts nickels, dimes, quarters,
and dollar coins to vend one or more images, depending on the amount of monetary
value (credit) not yet spent.
One price is available for all image types.
The M6000 employs SmartCointechnology to ensure that change is always
available for every conceivable vending situation.
Foreign coin mechanisms are available for select countries. Please contact us for
foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Three tube MDB changer (N, D, Q, $1 Coin, $41 capacity)
• Optional five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82
maximum capacity)
Software Features
• SmartCointechnology assures that change is always available for every
conceivable vending situation
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVendtechnology allows user to add monetary value "on the fly" i.e.
while copies are being made
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made
• Readouts show current (resettable) and cumulative (nonresettable) vend and
bypass copies totals
Technical Specifications
• Controller uses safe low voltage (24 VAC)
• Controller totally isolated from copier / printer
• Controller works on most all copiers and with most copier signals
• Canadian coin acceptance switch selectable with high capacity changer
• Two key coin inventory system adds measure of security
• Dimensions: 25.5" x 16" x 5.5"
• Weight: 42 lb
Warranty
The M6000 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
microchip. Warranties for components of the M6000, if different, supercede this
general warranty.
Specifically, the standard MDB changer is warrantied against manufacturing
defects for a period of two years from date of manufacture, to be determined from
the first four digits of its serial number (wwyy).
Additionally, the optional MDB changer is warrantied against manufacturing
defects for a period of three years from date of manufacture, to be determined
from the first four digits of its serial number (wwyy).
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M6000 on the
originally specified copier, unless otherwise authorized

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M6500 CreditVendCopier / Printer Controller
Product Overview
The M6500 CreditVendCopier / Printer Controller accepts nickels, dimes, quarters,
dollar coins and $1 and $5 bills to vend one or more images, depending on the
amount of monetary value (credit) not yet spent.
One price is available for all image types.
The M6500 employs SmartCointechnology to ensure that change is always
available for every conceivable vending situation.
Foreign coin mechanisms and bill validators are available for select countries. Please
contact us for foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Safe 24 VAC external power supply included
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Three tube MDB changer (N, D, Q, $1 Coin, $41 capacity)
• Optional five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82
maximum capacity)
• Self diagnostic MDB bill validator ($1 and $5 bills, $500 capacity)
Software Features
• SmartCointechnology assures that change is always available for every
conceivable vending situation
• SmartCointechnology dynamically controls bill type acceptance based on
maximum credit allowed, and change available
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVendtechnology allows user to add monetary value "on the fly" i.e.
while copies are being made
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made
• Readouts show current (resettable) and cumulative (nonresettable) vend and
bypass copies totals
Technical Specifications
• Controller uses safe low voltage (24 VAC)
• Controller totally isolated from copier / printer
• Controller works on most all copiers and with most copier signals
• Canadian coin acceptance switch selectable with high capacity changer
• Two key coin inventory system adds measure of security
• Dimensions: 25.5" x 16" x 5.5"
• Weight: 46 lb

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Warranty
The M6500 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's
microchip. Warranties for components of the M6500, if different, supercede this
general warranty.
Specifically, the standard MDB changer is warrantied against manufacturing
defects for a period of two years from date of manufacture, to be determined from
the first four digits of its serial number (wwyy).
Additionally, the optional MDB changer is warrantied against manufacturing
defects for a period of three years from date of manufacture, to be determined
from the first four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of three
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M6500 on the
originally specified copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M6506 CreditVendCopier / Printer Controller
Product Overview
The M6506 CreditVendCopier / Printer Controller accepts nickels, dimes, quarters,
dollar coins and $1 and $5 bills to vend one or more images, depending on the
amount of monetary value (credit) not yet spent.
Six prices are available to support up to six image types e.g., letter, legal and ledger,
for black and white, or full color copies. Other pricing schemes are possible,
depending on copier make and model (e.g., two color, reduction and enlargement,
etc.). The multi-pricing capability of the M6506 can only be used on copiers
supporting mode B or serial communication protocols.
The M6506 employs SmartCointechnology to ensure that change is always
available for every conceivable vending situation.
Foreign coin mechanisms and bill validators are available for select countries. Please
contact us for foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Safe 24 VAC external power supply included
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Three tube MDB changer (N, D, Q, $1 Coin, $41 capacity)
• Optional five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82
maximum capacity)
• Self diagnostic MDB bill validator ($1 and $5 bills, $500 capacity)
Software Features
• SmartCointechnology assures that change is always available for every
conceivable vending situation
• SmartCointechnology dynamically controls bill type acceptance based on
maximum credit allowed, and change available
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVendtechnology allows user to add monetary value "on the fly" i.e.
while copies are being made
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made
• Readouts show current (resettable) and cumulative (nonresettable) vend and
bypass copies totals by copy type (A through F)
Technical Specifications
• Controller uses safe low voltage (24 VAC)
• Controller totally isolated from copier / printer
• Controller works on most all copiers and with most copier signals
• Fully compatible with Ricoh Aficio, Xerox and Minolta color copiers

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
• Canadian coin acceptance switch selectable with high capacity changer
• Two key coin inventory system adds measure of security
• Dimensions: 25.5" x 16" x 5.5"
• Weight: 46 lb
Warranty
The M6506 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's
microchip. Warranties for components of the M6506, if different, supercede this
general warranty.
Specifically, the standard MDB changer is warrantied against manufacturing
defects for a period of two years from date of manufacture, to be determined from
the first four digits of its serial number (wwyy).
Additionally, the optional MDB changer is warrantied against manufacturing
defects for a period of three years from date of manufacture, to be determined
from the first four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of three
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M6506 on the
originally specified copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M7500 CreditVendCopier / Printer Controller
Product Overview
The M7500 CreditVendCopier / Printer Controller accepts nickels, dimes, quarters,
dollar coins, $1, $2, $5, $10 and $20 bills and proprietary magnetic debit cards to
vend one or more images, depending on the amount of monetary or card value
(credit) not yet spent. The M7500 comes standard with a high capacity premium
changer.
One price is available for all image types.
The M7500 employs SmartCointechnology to ensure that change is always
available for every conceivable vending situation. Value can be added to cards, and
value on cards can be used to make images, but value on cards cannot be converted
to money.
Foreign coin mechanisms and bill validators are available for select countries. Please
contact us for foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Safe 24 VAC external power supply included
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82 maximum
capacity) standard
• Self diagnostic MDB bill validator ($1, $2, $5, $10 and $20 Bills, $500
capacity)
• Card programmable MDB card reader for making, revaluing and using debit
cards
Software Features
• SmartCointechnology assures that change is always available for every
conceivable vending situation
• SmartCointechnology dynamically controls bill type acceptance based on
maximum credit allowed, and change available
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVendtechnology allows user to add monetary value "on the fly" i.e.
while copies are being made
• In card mode, unused credit is always returned to card
• In card mode, copier / printer use privileges are determined by a group
number field stored on the card
• Virginal cards can be initialized for group number and value directly on the
controller
• Card revaluation can be turned off
• Card vend price can be different than cash vend price
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
• Readouts show current (resettable) and cumulative (nonresettable) vend and
bypass copies totals
Technical Specifications
• Controller uses safe low voltage (24 VAC)
• Controller totally isolated from copier / printer
• Controller works on most all copiers and with most copier signals
• Canadian coin acceptance switch selectable with high capacity changer
• Two key coin inventory system adds measure of security
• Dimensions: 25.5" x 16" x 5.5"
• Weight: 46 lb
Warranty
The M7500 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's
microchip. Warranties for components of the M7500, if different, supercede this
general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first
four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period
of one year from date of shipment, to be determined by the serial number on the
card reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M7500 on the
originally specified copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M7506 CreditVendCopier / Printer Controller
Product Overview
The M7506 CreditVendCopier / Printer Controller accepts nickels, dimes, quarters,
dollar coins, $1, $2, $5, $10 and $20 bills and proprietary magnetic debit cards to
vend one or more images, depending on the amount of monetary or card value
(credit) not yet spent. The M7506 comes standard with a high capacity premium
changer.
Six prices are available to support up to six image types e.g., letter, legal and ledger,
for black and white, or full color copies. Other pricing schemes are possible,
depending on copier make and model (e.g., two color, reduction and enlargement,
etc.). The multi-pricing capability of the M7506 can only be used on copiers
supporting mode B or serial communication protocols.
The M7506 employs SmartCointechnology to ensure that change is always
available for every conceivable vending situation. Value can be added to cards, and
value on cards can be used to make images, but value on cards cannot be converted
to money.
Foreign coin mechanisms and bill validators are available for select countries. Please
contact us for foreign vending applications.
Electromechanical Features
• Two-line backlit user-friendly LCD display
• Two pushbutton switches for programming and readouts
• Red "message" light
• Semi-gloss enamel finish resists marring, scratches
• High security tubular housing lock
• Bypass keyswitch for free copies
• Bent coin return and change request plunger
• Large coin return cup
• Safe 24 VAC external power supply included
• Standard copier specific harness (sprig) included
• Large cash box ($900 capacity)
• Single board, single chip design
• Five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82 maximum
capacity) standard
• Self diagnostic MDB bill validator ($1, $2, $5, $10 and $20 Bills, $500
capacity)
• Card programmable MDB card reader for making, revaluing and using debit
cards
Software Features
• SmartCointechnology assures that change is always available for every
conceivable vending situation
• SmartCointechnology dynamically controls bill type acceptance based on
maximum credit allowed, and change available
• User-friendly instructions during vending, programming and readouts
• Exact change and error messages indicated by blinking red LED
• Seamless transition to and from exact change mode ensures that controller
"works out of the box"
• Resettable counter allows user to monitor copying by copies per original, or
total copies made per vend cycle
• AccumaVendtechnology allows user to add monetary value "on the fly" i.e.
while copies are being made
• In card mode, unused credit is always returned to card
• In card mode, copier / printer use privileges are determined by a group
number field stored on the card
• Virginal cards can be initialized for group number and value directly on the
controller

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
• Card revaluation can be turned off
• Card vend price can be different than cash vend price
• Time delay reset (TDR) ensures full copy imaging on last full copy credit
• Anti-cheating timeout delay monitors for late copy counts after change return
request made
• Readouts show current (resettable) and cumulative (nonresettable) vend and
bypass copies totals by copy type (A through F)
Technical Specifications
• Controller uses safe low voltage (24 VAC)
• Controller totally isolated from copier / printer
• Controller works on most all copiers and with most copier signals
• Fully compatible with Ricoh Aficio, Xerox and Minolta color copiers
• Canadian coin acceptance switch selectable with high capacity changer
• Two key coin inventory system adds measure of security
• Dimensions: 25.5" x 16" x 5.5"
• Weight: 46 lb
Warranty
The M7506 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's
microchip. Warranties for components of the M7506, if different, supercede this
general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first
four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period
of one year from date of shipment, to be determined by the serial number on the
card reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M7506 on the
originally specified copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
M Series Copier / Printer Controller Optional Components
High capacity
US-Canadian changer
Full body decal
[Minimum order - 50 pcs]
Floor mounting pedestal
Lockable cash box

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
AC500 Bill Changer
Product Overview
Advanced Technologies offers a complete line of bill changers for bulk changing of
paper currency into coins. US bills can be changed into quarters or dollar coins. Box
integrity is assured with full body hinge and screw type lock.
Technical Specifications
• Single hopper
• Bill acceptor takes $1, $2 and $5 bills
• Stacker capacity of 450 bills
• Hopper capacity of 1000 quarters
• Dimensions of 8.5" W X 18" H X 10" D
• Weight of 37 lb
• Optional $1 coin hopper with 800 coin capacity
Warranty
The AC bill changers are warrantied against manufacturing defects for a period of
two years from date of shipment, to be determined by the serial number on its main
board's microchip. Warranties for components of the AC bill changers, if different,
supercede this general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first four
digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period of
one year from date of shipment, to be determined by the serial number on the card
reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any of
the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
AC1001 Bill Changer
Product Overview
Advanced Technologies offers a complete line of bill changers for bulk changing of
paper currency into coins. US bills can be changed into quarters or dollar coins. Box
integrity is assured with full body hinge and screw type lock.
Technical Specifications
• Single hopper
• Bill acceptor takes $1, $2, $5, $10 and $20 bills
• Stacker capacity of 450 bills
• Hopper capacity of 2800 quarters / tokens OR 2200 $1 coins
• Dimensions of 8.5" W X 26" H X 13" D
• Weight of 58 lb
Warranty
The AC bill changers are warrantied against manufacturing defects for a period of
two years from date of shipment, to be determined by the serial number on its main
board's microchip. Warranties for components of the AC bill changers, if different,
supercede this general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first four
digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period of
one year from date of shipment, to be determined by the serial number on the card
reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any of
the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
AC2001 Bill Changer
Product Overview
Advanced Technologies offers a complete line of bill changers for bulk changing of
paper currency into coins. US bills can be changed into quarters or dollar coins. Box
integrity is assured with full body hinge and screw type lock.
Technical Specifications
• Dual hopper
• Bill acceptor takes $1, $2, $5, $10 and $20 bills
• Stacker capacity of 1000 bills
• 2 hoppers that can dispense either all quarters [2800 / hopper], all $1 coins
[2200 / hopper], or 1 hopper of each.
• Dimensions of 13.5" W X 26" H X 13" D
• Weight of 91 lb
Warranty
The AC bill changers are warrantied against manufacturing defects for a period of
two years from date of shipment, to be determined by the serial number on its main
board's microchip. Warranties for components of the AC bill changers, if different,
supercede this general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first four
digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period of
one year from date of shipment, to be determined by the serial number on the card
reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any of
the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
Copicode AlphaCopier / Printer Controller
Product Overview
The Copicode AlphaCopier / Printer Controller is a fully alphanumeric keypad
controller designed to vend images against accounting quotas associated with users,
departments and projects.
The Alpha comes standard with approximately 1500 codes, but can be easily
expanded in multiples of 1500 codes, up to a maximum of 6000 codes.
The device supports two and a half levels of accounting [with the optional P200N
printer], or three levels of accounting [with Copy-Track®software, using segmented
user codes].
The Alpha supports individual prices for up to four different image types, depending
on copier / printer make and model. The Alpha stores 10 different quotas for limiting
imaging activity by user or project.
The Alpha can be configured for different keypad operation modes. Specifically, it
can be set up for open accounting third party (client / matter) billing, a mode
favored by the legal profession.
The Alpha has four speed buttons and four navigational arrows for quick and easy
administrative programming. When used with Copy-Track software, four sets of
prices are supported across a group of copiers.
With Copy-Track software, usage statistics can be downloaded, and codes uploaded,
manually or serially, using either a laptop or similar device, or a network connection.
The Alpha comes standard with its own 24 VDC power supply, but it can run off
power from the copier / printer in many cases. It is shipped with a copier / printer
specific sprig at no extra charge.
The Alpha has a small footprint, measuring only 4" x 2.5" x 7", and weighs a mere 1
lb. It comes with a one year (from date of shipment) warranty for manufacturing
defects.
Warranty
The Copicode Alpha is warrantied against manufacturing defects for a period of one
year from date of shipment, to be determined by the serial number on its back and
an internal serial number.
Advanced Technologies (TekVend) agrees to repair or replace an Alpha shown to
have manufacturing defects within its warranty period. Advanced Technologies
(TekVend) agrees to pay ground return shipping and insurance on these warranty
repairs or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. Installer
is expected to use the original copier specific harness (sprig) supplied by Advanced
Technologies (TekVend), and install the Copicode Alpha on the originally specified
copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V305.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
Copicode Alpha-XCopier / Printer Controller
Product Overview
The Copicode Alpha-XCopier / Printer Controller is a fully alphanumeric keypad
controller designed to vend images against accounting quotas associated with users,
departments and projects. It is functionally the same as the Copicode Alpha, but is
fully ethernet compliant.
The Alpha-X comes standard with approximately 1500 codes, but can be easily
expanded in multiples of 1500 codes, up to a maximum of 6000 codes.
When used in conjunction with Copy-Track®software, the Alpha-X supports up to
three levels of accounting through the use of segmented user codes.
The Alpha-X supports individual prices for up to four different image types,
depending on copier / printer make and model. The Alpha-X stores 10 different
quotas for limiting imaging activity by user or project. When used with Copy-Track
software, four sets of four prices are supported across a network of copiers.
The Alpha-X can be configured for different keypad operation modes. Specifically, it
can be set up for open accounting third party (client / matter) billing, a mode
favored by the legal profession.
The Alpha-X has four speed buttons and four navigational arrows for quick and easy
administrative programming. When used with Copy-Track software, all programming
can be done remotely, at a PC.
With Copy-Track software, usage statistics can be downloaded, and user codes
uploaded locally to a laptop [using a null ethernet cable], or remotely [using a hub
connection]. Data can be transferred at will, or as a scheduled task. With port
forwarding, or using a link server, Alpha-X controllers can even be polled for data
over the Internet.
With Copy-Track software, copier preventative maintenance calls can be scheduled
from downloaded usage data.
The Alpha-X comes standard with its own 24 VDC power supply, and is shipped with
a copier / printer specific sprig at no extra charge.
The Alpha-X has a small footprint, measuring only 7.75" x 4.25" x 2.5", and weighs a
mere 2 lb. It comes with a one year (from date of shipment) warranty for
manufacturing defects. It is perfect for locations with many copiers, where user
codes must be updated regularly, and manual collection of user data is a significant
expense.
Warranty
The Copicode Alpha-X is warrantied against manufacturing defects for a period of
one year from date of shipment, to be determined by its internal [boot up] serial
number.
Advanced Technologies (TekVend) agrees to repair or replace any Alpha-X shown to
have manufacturing defects within its warranty period. Advanced Technologies
(TekVend) agrees to pay ground return shipping and insurance on these warranty
repairs or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V305.
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. Installer
is expected to use the original copier specific harness (sprig) supplied by Advanced
Technologies (TekVend), and install the Copicode Alpha-X on the originally specified
copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
TC11N Copier / Printer Controller
Product Overview
The TC11N Copier / Printer Controller is a proprietary magnetic card reader /
encoder that vends images against value stored on reusable or throwaway magnetic
stripe cards.
A special Administrator card is used to initialize and value these cards, and to set
control parameters and prices. Depending on copier / printer make and model, and
copier control mode selected, individual prices for up to four different image types
are supported.
Copier / printer use privileges are determined by group numbers stored both on the
cards and in the TC11N.
Usage statistics can be read out on the TC11N's LCD display.
The TC11N comes standard with its own 24 VDC power supply, but it can run off
power from the copier / printer in many cases. It is shipped with a copier / printer
specific sprig at no extra charge.
The TC11N has a small footprint, measuring only 4" x 3.5" x 7", and weighs a mere 2
lb. It comes with a one year (from date of shipment) warranty for manufacturing
defects.
Warranty
The M7500 is warrantied against manufacturing defects for a period of one year from
date of shipment, to be determined by the serial number at boot up [equal to the
serial number on its back].
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
TC11N within the warranty period. Advanced Technologies (TekVend) agrees to pay
ground return shipping and insurance on any warranty repair or replacement.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. The
installer is expected to use the original copier specific harness (sprig) supplied by
Advanced Technologies (TekVend), and install the TC11N on the originally specified
copier, unless otherwise authorized.

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: [phone] | Service: [phone] | Fax: [phone]
Email: [email protected] | Web: http://www.tekvend.com
Card Types