Gestetner 5499 User manual

Operation
62
1
Class Mode
Use the {
{{
{Class}
}}
}key to make sets of
prints from the same original. The
same numbers of prints are made for
each set.
Note
❒When you choose Class mode, Job
Separation mode is automatically
turned on. The job separator pulls
the top sheet of each set delivered
to the paper delivery tray to mark
the end of each printed set. The
next cycle begins automatically.
See p.79 “Job Separation”.
❒You can suspend Job Separation
mode whenever you set the Class
mode with the user tools. See “Au-
to Separate”on p.146 “4. Mode Set-
ting”.
A
AA
APress the {
{{
{Class}
}}
}key.
B
BB
BSelect [Same-NO.]with the [→
→→
→]or
{
{{
{}
}}
}}
}}
}key.
C
CC
CPress the [OK]key.
D
DD
DWith the number keys, enter the
desired number of prints for each
set.
E
EE
EPress the {
{{
{q
qq
q}
}}
}key.
GRCLAS0E
R
RR R
R R R

Class Mode
63
1
F
FF
FWith the number keys, enter the
number of sets you wish to make.
Note
❒Up to 99 sets can be selected for
an original.
G
GG
GPress the [OK]key.
H
HH
HPlace one original on the expo-
sure glass or in the optional docu-
ment feeder.
I
II
IPress the {
{{
{Start}
}}
}key.
J
JJ
JCheck the image position on the
trial or proof print.
Note
❒If the image position is not cor-
rect, adjust it using the [Image
=
==
=]key. See p.24 “Adjusting the
Position of Printed Images”.
K
KK
KMake your prints.

Operation
64
1
Combine Originals
You can combine originals in two ways:
❖
❖❖
❖2 single-sided originals →
→→
→1 single-sided print with 2 images
Combine two single-sided originals onto one single-sided print with the two
images placed side-by-side.
❖
❖❖
❖2 single-sided originals →
→→
→1 single-sided print with 4 images
Combine two single-sided originals onto one single-sided print with each im-
age duplicated (total of four images).
Note
❒You can also use Memory Combine mode. See p.118 “Memory Combine”.
❒You can set the machine to cancel Combine Originals mode after finishing
your print job with the user tools. See “Cancel Comb.”on p.146 “4. Mode Set-
ting”.
❒Any image closer than 8mm, 0.32" to the leading edge of the first original will
not be printed. Any image closer than 4mm, 0.16" to the leading edge of the
second original will also not be printed. When the image is too close to the
leading edge, use copies of the originals with the image shifted at least 8mm,
0.32" for the first original (4mm, 0.16" for the second original) from the leading
edge.
❒You can select different image settings for the first and second original.
❒Make sure that the paper feed side plates touch the paper lightly and that the
paper size and direction shown on the panel display match the size and direc-
tion of paper actually placed in the paper feed tray. Either case can cause the
two original images not to appear in the proper position on prints.
❒The following tables list the combinations that can be used with the Combine
feature (2 single-sided originals →1 single-sided print with 2 images).
GRCOMB2E
22
2
11
1
11
22

Combine Originals
65
1
❖
❖❖
❖Metric version
❖
❖❖
❖Inch version
❒The following tables list the combinations that can be used with the Combine
feature (2 single-sided originals →1 single-sided print with 4 images).
❖
❖❖
❖Metric version
❖
❖❖
❖Inch version
Original Size
A4KB5KA5KB6KA6K
Paper Size A3L100% 115% 141% 163% 200%
B4L87% 100% 122% 141% 173%
A4L71% 82% 100% 115% 141%
B5L61% 71% 87% 100% 122%
A5L50% 58% 71% 82% 100%
Original Size
81/2" ×11"K51/2" ×81/2"K
Paper Size 11" ×17"L100% 129%
81/2" ×14"L77% 100%
81/2" ×11"L65% 100%
51/2" ×81/2"L50% 65%
Original Size
A3LB4LA4LB5LA5LB6LA6L
Paper
Size
A3L50% 58% 71% 82% 100% 115% 141%
B4L- 50% 61% 71% 87% 100% 122%
A4L- - 50% 58% 71% 82% 100%
B5L- - - 50% 61% 71% 87%
A5L- - - - 50% 58% 71%
Original Size
11" ×17"L81/2" ×
14"L
81/2" ×
11"L
51/2" ×
81/2"L
Paper Size 11" ×17"L50% 65% 65% 100%
81/2" ×14"L- 50% 50% 77%
81/2" ×11"L- - 50% 77%
51/2" ×81/2"L---50%

Operation
66
1
❒If a suitable reproduction ratio is not selected, images might not completely
appear on prints.
❒Originals reading from left to right.
Reference
When you use the optional document feeder with this function, see p.129
“Combine Printing”.
A
AA
APlace the first original face down.
Note
❒When you place an original sideways (K), the top should be toward the
operation panel as shown above.
B
BB
BEnter the number of prints using the number keys.
34
4
3
2
112
ZDZX160E
ZDCH110E

Combine Originals
67
1
C
CC
CCheck the print paper size and the reproduction ratio.
Note
❒To have the machine choose a suitable ratio automatically, use Auto Mag-
nification mode. See p.31 “Auto Magnification”.
D
DD
DPress the {
{{
{Combine}
}}
}key.
E
EE
ESelect [Combine 2]or [Quadruple]with the [←
←←
←][→
→→
→]or {
{{
{~
~~
~}
}}
}{
{{
{}
}}
}}
}}
}keys.
F
FF
FPress the [OK]key.
G
GG
GPress the {
{{
{Start}
}}
}key.

Operation
68
1
H
HH
HThe beeper sounds after the first original has been stored. Place the second
original face down.
I
II
IPress the {
{{
{Start}
}}
}key.
J
JJ
JCheck the image position on the trial or proof print.
Note
❒If the image position is not correct, adjust it using the [Image =
==
=]key. See
p.24 “Adjusting the Position of Printed Images”.
K
KK
KMake your prints.
ZDCH110E

Auto Combine Mode
69
1
Auto Combine Mode
Preparation
To use this function, you have to
select Auto Combine mode with
the user tools. See “Combine”on
p.146 “4. Mode Setting”.
You can have images duplicated in
two ways:
❖
❖❖
❖1 single-sided original →
→→
→1 single-sid-
ed print of 2 images
The original image is duplicated
twice on one print.
❖
❖❖
❖1 single-sided originals →
→→
→1 single-
sided print of 4 images
The original image is duplicated
four times on one print.
Reference
See p.64 “Combine Originals”for
details.
A
AA
APlace your original on the expo-
sure glass or in the optional docu-
ment feeder.
B
BB
BEnter the number of prints using
the number keys.
C
CC
CCheck the print paper size and the
reproduction ratio.
Note
❒To have the machine choose a
suitable ratio automatically, use
Auto Magnification mode. See
p.31 “Auto Magnification”.
D
DD
DPress the {
{{
{Combine}
}}
}key.
E
EE
ESelect [Repeat 2]or [Repeat 4]with
the [←
←←
←][→
→→
→]or {
{{
{~
~~
~}
}}
}{
{{
{}
}}
}}
}}
}keys.
GRACOM0E
111
1
11 11

Operation
70
1
F
FF
FPress the [OK]key.
G
GG
GPress the {
{{
{Start}
}}
}key.
H
HH
HCheck the image position on the
trial or proof print.
Note
❒If the image position is not cor-
rect, adjust it using the [Image
=
==
=]key. See p.24 “Adjusting the
Position of Printed Images”.
I
II
IMake your prints.

Skip Feed Printing
71
1
Skip Feed Printing
You can increase the time between
prints using the {
{{
{Skip Feed}
}}
}key. By
default, when one sheet of paper is
fed, the drum rotates twice. However,
you can select the number of drum ro-
tations. This gives you a chance to re-
move prints one by one from the
paper delivery tray or insert one sheet
of paper between two prints. If you
use this function, you can also use pa-
per longer than the length limitation
of 432mm, 17.0".
Note
❒For every sheet of paper fed, the
drum rotates twice by default. You
can change this default setting
with the user tools. See “No. of
Skip Feed”on p.146 “4. Mode Set-
ting”.
❒The maximum length of paper in
Skip Feed mode is 460mm, 18.1".
❒When you use paper longer than
432mm, 17.0", prints will not be de-
livered to the paper delivery tray
properly, so lower the paper deliv-
ery end plate and take out the
prints by hand.
A
AA
APlace your original on the expo-
sure glass or in the optional docu-
ment feeder.
B
BB
BPress the {
{{
{Skip Feed}
}}
}key.
C
CC
CIf necessary select the number of
drum rotations per sheet of paper
fed with the [←
←←
←][→
→→
→]or {
{{
{~
~~
~}
}}
}{
{{
{}
}}
}}
}}
}
keys.
Note
❒You can also select the number
of rotations with the number
keys.
❒You can select from 2 to 9 rota-
tions.
❒By default, the machine asks
you to confirm the number of
rotations. You can have this step
omitted by adjusting the user
tool settings. See “No. of Skip
Feed”on p.146 “4. Mode Set-
ting”.
D
DD
DPress the [OK]key.
E
EE
EPress the {
{{
{Start}
}}
}key.
Skip Feed
Edge Erase
Over lay
Make-Up
Stamp
Image Density
Lighter
Darker 2
Darker 1
Normal
Economy Mode
Original Storage
Job Separator
Auto On Line
On Line
ZDZS030N