Advantech UNO-2271G User manual

User Manual
UNO-2271G
電腦
Intel®Atom™Pocket-Size
Automation Computer with 2 x
GbE, 1 x mPCIe, HDMI, eMMC

UNO-2271G User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel®, Core™ and Atom™ are the trademarks of Intel Corporation
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Support
For more information on this and other Advantech products, please visit our websites
at: http://www.advantech.com
For technical support and service, please visit our support website at:
http://support.advantech.com/
UNO-2271G
UNO-2271G-E21AE, UNO-2271G-E22AE, UNO-2271G-E23AE,
UNO2271GE211601E-T, UNO2271GE211701E-T, UNO2271GE211602E-T,
UNO2271GE211702E-T, UNO2271GE211603E-T, UNO2271GE211703E-T,
UNO2271GE211604E-T, UNO2271GE211704E-T, UNO2271GE211605E-T,
UNO2271GE211705E-T, UNO2271GE211606E-T, UNO2271GE211706E-T,
UNO2271GE221601E-T, UNO2271GE221701E-T, UNO2271GE221602E-T,
UNO2271GE221702E-T, UNO2271GE221603E-T, UNO2271GE221703E-T,
UNO2271GE221604E-T, UNO2271GE221704E-T, UNO2271GE221605E-T,
UNO2271GE221705E-T, UNO2271GE221606E-T, UNO2271GE221706E-T,
UNO2271GE231601E-T, UNO2271GE231701E-T, UNO2271GE231602E-T,
UNO2271GE231702E-T, UNO2271GE231603E-T, UNO2271GE231703E-T,
UNO2271GE231604E-T, UNO2271GE231704E-T, UNO2271GE231605E-T,
UNO2271GE231705E-T, UNO2271GE231606E-T, UNO2271GE231706E-T,
UNO2271GE211801E-T, UNO2271GE211901E-T, UNO2271GE211802E-T
UNO2271GE211902E-T, UNO2271GE211803E-T, UNO2271GE211903E-T,
UNO2271GE221801E-T, UNO2271GE221901E-T, UNO2271GE221802E-T,
UNO2271GE221902E-T, UNO2271GE221803E-T, UNO2271GE2211903E-T,
UNO2271GE231801E-T, UNO2271GE231901E-T, UNO2271GE231802E-T,
UNO2271GE231902E-T, UNO2271GE231803E-TUNO2271GE231903E-T
Part No. 2003227100 Edition 1
Printed in Taiwan August 2016

iii UNO-2271G User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

UNO-2271G User Manual iv
警告使用者
這是甲類測試產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，
使用者會被要求採取某些適當的對策。
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.

v UNO-2271G User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
–The power cord or plug is damaged.
–Liquid has penetrated into the equipment.
–The equipment has been exposed to moisture.
–The equipment does not work well, or you cannot get it to work according to
the user's manual.
–The equipment has been dropped and damaged.
–The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW 0°C (32° F) OR ABOVE 50°C
(122°F) for UNO-2271G.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
17. ATTENTION: Danger d'explosion si la batterie est mal REMPLACE. REM-
PLACER UNIQUEMENT PAR LE MEME TYPE OU EQUIVALENT RECOM-
MANDÉ PAR LE FABRICANT, jeter les piles usagées SELON LES
INSTRUCTIONS DU FABRICANT.
18. The sound pressure level at theoperator's position according to IEC 704-1:1982
is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
安全指示
1.請仔細閱讀此安全操作說明。
2.請妥善保存此用戶手冊供日後參考。
3.用濕抹布清洗設備前，請確認拔除電源線。請勿使用液體或去污噴霧劑清洗

UNO-2271G User Manual vi
設備。
4.對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。
5.請勿在潮濕環境中試用設備。
6.請在安裝前確保設備放置在可靠的平面上，意外摔落可能會導致設備損壞。
7.設備機殼的開孔適用於空氣對，從而防止設備過熱。請勿覆蓋開孔。
8.當您連接設備到電源插座前，請確認電源插座的電壓符合要求。
9.請將電源線佈置在人們不易絆倒的位置，請勿在電源線上覆蓋任何雜物。
10.請注意設備上所有的警告標示。
11.如果長時間不使用設備，請拔除與電源插座的連結，避免設備被超標的電
壓波動損壞。
12.請勿讓任何液體流入通風口，以免引起火灾或短路。
13.請勿自行打開設備。為了確保您的安全，請透過經認證的工程師來打開設
備。
14.如遇下列情况，請由專業人員維修：
電源線或插頭損壞；
設備內部有液體流入；
設備曾暴露在過度潮濕環境中使用；
設備無法正常工作，或您無法透過用戶手冊來正常工作；
設備摔落或損壞；
設備有明顯外觀損；
15.請勿將設備放置在超出建議溫度範圍的環境，即不要低於 0℃（32℉）或高
於50℃（122℉），否則可能會造成設備損壞。
16.注意：若電池更換不正確，將有爆炸危險。因此，只可以使用製造商推薦
的同一種或者同等型號的電池進行替換。請按照製造商的指示處理舊電池。
17.根據 IEC704‐1:1982規定，操作員所在位置音量不可高於 70分貝。
18.限制區域：請勿將設備安裝於限制區域使用。
19.免責聲明：請安全訓示符合 IEC704‐1要求。研華公司對其內容之準確性不
承擔任何法律責任。

vii UNO-2271G User Manual
Contents
Chapter 1 Overview...............................................1
1.1 Introduction ...............................................................................................2
1.2 Safety Precautions....................................................................................2
1.3 Accessories...............................................................................................3
Chapter 2 Hardware Functionality.......................5
2.1 Introduction ...............................................................................................6
Figure 2.1 FrontPanelofUNO-2271G-E21AEforonestackmodel
which can support extra extension kit UNO-2271G-
EKAE..........................................................................6
Figure 2.2 FrontPanelofUNO-2271G-E22AEfortwo stack model
which can support extra 3 x USB and iDoor module..6
Figure 2.3 FrontPanelofUNO-2271G-E23AEfortwo stack model
which can support extra 2 x COM port and iDoor mod-
ule...............................................................................6
2.2 UNO-2271G Interface ...............................................................................7
2.2.1 COM Port Interface (COM 1, COM 2)...........................................7
2.3 LAN: Ethernet Connector..........................................................................7
2.4 Power Connector ......................................................................................7
2.5 USB Connector .........................................................................................7
2.6 RTC Battery Specification.........................................................................8
2.7 Power Button/Power Management ...........................................................8
2.8 Reset Button .............................................................................................8
2.9 PCI Express Mini Card Socket..................................................................8
Chapter 3 Initial Setup ..........................................9
3.1 Chassis Grounding..................................................................................10
Figure 3.1 Chassis Grounding Connection................................10
3.2 Connecting Power...................................................................................10
Appendix A System Settings and Pin
Assignments......................................11
A.1 System I/O Address and Interrupt Assignment.......................................12
Table A.1: Interrupt Assignments...............................................12
A.2 Board Connectors and Jumpers .............................................................12
Figure A.1 Connector & Jumper Locations for UNO-2271G-
N2AE(front)...............................................................12
Table A.2: Connectors and Jumpers .........................................12
A.3 Power Connector (PWR).........................................................................13
Table A.3: Power connector pin assignments............................13
A.4 USB Connector.......................................................................................13
Table A.4: USB 2.0 Connector Pin Assignments.......................13
Table A.5: USB 3.0 Connector Pin Assignments.......................13
A.5 HDMI Display Connector.........................................................................14
Table A.6: HDMI Display Connector..........................................14
A.6 COM1/COM2 RS232/422/485 connector................................................14
A.7 Mini PCIE slot (MINIPCIE)......................................................................15
A.8 LAN RJ45 connector...............................................................................16
A.9 Screw Type and Quantity for Mounting Module......................................17

UNO-2271G User Manual viii

Chapter 1
1Overview
This chapter provides an overview
of UNO-2271G specifications.
Sections include:
Introduction
Safety precautions
Accessories

UNO-2271G User Manual 2
1.1 Introduction
The UNO-2271G is an embedded Hardware Ready Platform that can shorten your
development time and offers a wide array of networking interfaces to fulfill the exten-
sive needs of different projects. UNO-2271G includes Intel’s latest Atom technology
and provide rich interfaces including up to 2 x GbE LAN and 1 x USB3.0 ports. The
UNO-2271G supports one HDMI display and also Advantech’s latest iDoor technol-
ogy.
The UNO-2271G can operate in wide temperatures (from 0 to 50°C). The UNO-
2271G also uses Intel Atom CPUs with great computing power and Built-in Onboard
4G DDR3L RAM for heavy programs.
The UNO-2271G provides great expansion including 1 x Mini-PCIe support. With
these expansions UNO-2271Ghas great expandability from Wi-Fi, 3G, I/O expansion
and industrial protocols with iDoor technology.
With multiple OS and driver support, such as Windows 7, Windows 10 and embed-
ded Linux, users can integrate applications easily in an application ready platform
that can provide versatile functions to fulfill diverse requirements.
1.2 Safety Precautions
The following sections tell how to make each connection. In most cases, you will sim-
ply need to connect a standard cable.
Warning! Always disconnect the power cord from your chassis whenever you are
working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher UNO-2271G. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-2271G. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static-
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.

3 UNO-2271G User Manual
Chapter 1 Overview
1.3 Accessories
Please refer below for the accessory list:
Pin connector for power wiring (Advantech P/N: 1652002209)
Driver DVD
Warranty card
If anything is missing or damaged, contact your distributor or sales representative
immediately.
Operating Temperature:0 to 50°C
Power Requirements:10 ~ 30 VDC
Power Consumption: 12 W (Typical), 20 W (Max)
System Hardware Specification
–CPU: Intel Atom Single Core E3815 1.46GHz
–Memory: Onboard 4G DDR3L 1066MHz RAM
–Graphic Engine: Intel HD Graphic
–Ethernet: Realtek RTL8111E GbE, 802.10av, IEEE1588/802.1AS, 803.3az
–Storage:
32G eMMC onboard
1 x full-size mSATA (support mPCIe)
–Expansion: 1 x Full-size mPCIe slot
–Display:1 x HDMI, support 1920 x 1080 @60Hz 24bpp
Applicable Models:
UNO-2271G-E21AE
UNO-2271G-E22AE
UNO-2271G-E23AE

UNO-2271G User Manual 4

Chapter 2
2Hardware
Functionality
This chapter shows how to setup
the UNO-2271G’s hardware func-
tions, including connecting
peripherals, setting switches and
indicators.
Sections include:
Introduction
UNO-2271G Interface
LAN / Ethernet Connector
Power Connector
USB Connector
RTC Battery Specification
Power Button/Power Manage-
ment
Reset Bottom
PCI Express Mini Card Socket

UNO-2271G User Manual 6
2.1 Introduction
The following figures show the connectors on UNO-2271G. The following sections
give you information about each peripheral.
Figure 2.1 Front Panel of UNO-2271G-E21AE for one stack model which can
support extra extension kit UNO-2271G-EKAE
Figure 2.2 Front Panel of UNO-2271G-E22AE for two stack model which can
support extra 3 x USB and iDoor module
Figure 2.3 Front Panel of UNO-2271G-E23AE for two stack model which can
support extra 2 x COM port and iDoor module

7 UNO-2271G User Manual
Chapter 2 Hardware Functionality
2.2 UNO-2271G Interface
The UNO-2271G two standard COM serial communication ports: COM1, COM2.
The setting can be adjusted in the bios page, the driver will be installed automatically
during OS installation
2.2.1 COM Port Interface (COM 1, COM 2)
For UNO-2271G-E23AE, 2 x RS-232/422/485, DB9, 50~115.2kbps.
2.3 LAN: Ethernet Connector
UNO-2271Gs are equipped with two Gigabit LAN controller.
For the UNO-2271G, the controller chip used is an Realtek RTL8111E Ethernet con-
troller that is fully compliant with IEEE 802.3u 10/100/1000 Base-T
The Ethernet port is a standard RJ-45 jack, and LED indicators are on the front to
show its Link (Green LED) and Active (Green LED) status.
2.4 Power Connector
The UNO-2271G comes with a Phoenix connector that carries 10~30 VDC external
power input, and features reversed wiring protection. Therefore, it will not cause any
damage to the system by reversed wiring of ground line and power line. Refer to
Appendix A.4
2.5 USB Connector
The USB interface supports Plug and Play, which enables you to connect or discon-
nect a device whenever you want, without turning off the computer. The UNO-2271G
provides one USB connector (UNO-2271G-E22AE has extra support for 3 x USB2.0
ports), which gives complete Plug & Play and hot swapping for up to 127 external
devices. The USB interface can be disabled in the system BIOS
For the UNO-2271G-E21AE and UNO-2271G-E23AE, there is one USB port which
complies with USB EHCI, Rev. 3.0 compliant.
For the UNO-2271G-E22AE, there are four USB ports, three ports comply with USB
EHCI, Rev. 2.0 compliant and one port complies with USB EHCI, Rev. 3.0 compliant
Refer to Appendix A.5 for its pin assignments.

UNO-2271G User Manual 8
2.6 RTC Battery Specification
The UNO-2271G has an RTC Battery to ensure the setting in BIOS and system clock
can be kept, even with power disconnected for a short time.
Type: BR2032
Output Voltage: 3 VDC
2.7 Power Button/Power Management
Press the “PWR” button to power on or power off the UNO-2271G(ATX type). The
UNO-2271G supports the ACPI (Advanced Configuration and Power Interface).
Besides power on/off, it support multiple suspend modes, such as Power on Sus-
pend (S1), Suspend to RAM (S3), Suspend to Disk (S4). In S3 and S4 suspend
mode, the power consumption can be less than 2W which meet criteria of Energy
Star.
2.8 Reset Button
Press the “Reset” button to activate the hardware reset function.
2.9 PCI Express Mini Card Socket
The UNO-2271G supports one full size socket for PCI Express mini cards.The
(MINI1) interface is mainly targeted at supporting iDoor technology/modules for
diverse applications such as isolated COM port, Profibus, WLAN GPRS, 3G, mRAM
and iDoor Module. Users can install the card easily using the optional kit.
The UNO-2271G supports one socket full size PCI Express mini cards.
Note! An additional SIM card slot is disabled. Please note you still require 3G
Mini-PCIe built-in SIM card slot module installed to be able to use 3G
functions.(For model produced before June 2015)

Chapter 3
3Initial Setup
This chapter introduces how to
initialize the UNO-2271G.
Sections include:
Inserting aM.2
Chassis Grounding
Connecting Power
Installing a Wireless LAN Card
and Antenna

UNO-2271G User Manual 10
3.1 Chassis Grounding
UNO-2271G provides good EMI protection and a stable grounding base. There is an
easy-to-connect chassis grounding point to use.
Figure 3.1 Chassis Grounding Connection
3.2 Connecting Power
This product is intended to be supplied by a Listed Power Adapter or DC power
source, rated 10-30Vdc, 2A and Tma 50 degree C, if need further assistance, please
contact Anvantech for further information.
mSATA

Appendix A
ASystem Settings and
Pin Assignments

UNO-2271G User Manual 12
A.1 System I/O Address and Interrupt Assignment
A.2 Board Connectors and Jumpers
There are several connectors and jumpers on the UNO-2271G board. The following
sections tell you how to configure the UNO-2271G hardware setting.
Figure A.1 shows the locations of UNO-2271G’s connectors and jumpers.
Figure A.1 Connector & Jumper Locations for UNO-2271G-N2AE(front)
Table A.1: Interrupt Assignments
Interrupt No. Interrupt Source
NMI Parity Error Detected
IRQ0 System timer
IRQ1 Standard 101/102-Key or Microsoft Natural PS/2Keyboard
IRQ2 Interrupt from controller 2 (cascade)
IRQ3 Communications Port (COM2)
IRQ4 Communications Port (COM1)
IRQ6 Available
IRQ8 System CMOS/Real-time clock
IRQ9 Microsoft ACPI-Compliant System
IRQ12 PS/2 Compatible Mouse
IRQ13 Numeric data processor
IRQ14 Reserved
IRQ15 Reserved
Table A.2: Connectors and Jumpers
Label Function
MINI1 PCIExpressminicardsocket/mSATA
DCIN1 Powerinconnector
HDMI1 HDMIconnector
USB1 USB3.0connector
LAN1 2portRJ45connector