Advantech ARK-3533 User manual

User Manual
ARK-3533
Fanless Embedded Box PC

ARK-3533 User Manual ii
Attention!
Please note:
This package contains a hard-copy user manual in Chinese for China CCC certifica-
tion purposes. Please disregard the Chinese hard-copy user manual if the product is
not to be sold and/or installed in China.

iii ARK-3533 User Manual
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semiconductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology Ltd.
Chrontel is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support
Part No. 2006353300 Edition 1
Printed in Taiwan September 2023

ARK-3533 User Manual iv
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Declaration of Conformity
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.

v ARK-3533 User Manual
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
1 x ARK-3533 Unit
1 x User Manual (Simplified Chinese)
1 x China RoHS
1 x Mounting kit
1 x WISE-DeviceOn
1 x McAfee Application Control Lite / Acronis Backup 11.7 for Windows PC
Warning! Warnings indicate conditions that could cause personal injury if not
observed!
Caution! Cautions are included to help prevent hardware damage and data loss.
For example:
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional and/or optional information.

ARK-3533 User Manual vi
Ordering Information
Optional Items for Default SKU
Part No. CPU DDR5 LAN HDMI RS-232 RS-232/
422/485 USB3.2 USB 2.0 M.2 B key SIM M.2 E key DC Input
ARK-3533-
00A1
LGA1700
Socket Type
Up to
64GB 2 2 4 4 4 4 1 1 1 9-36V DC
ARK-3533-
00A1U
LGA1700
Socket Type
Up to
64GB 2 2 4 4 4 4 1 1 1 9-36V DC
Note! CPU/Memory/Storage and operating system included by request.
Part Number Description
96PSA-A150W19P4-4 AC to DC adapter, DC 24V 150W, 0 ~ 40°C (-4 ~ 104°F)
96PSA-A230W24P4-4 AC to DC adapter, DC 24V 230W, -20 ~ 60°C (-4 ~ 140°F)
1702002600 Power cable 3-pin 183 cm (6 ft), USA type
1702002605 Power cable 3-pin 183 cm (6 ft), EU type
1702031801 Power cable 3-pin 183 cm (6 ft), UK type
1700000237 Power cable 3-Pin 183 cm (6 ft), PSE type

vii ARK-3533 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The power outlet sockets should have grounded connections.
8. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
11. Never pour liquid into an opening. This may cause fire or electrical shock.
12. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
13. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
14. Do not leave the equipment in an environment with a storage temperature of
below -40°C (-40°F) or above 85°C (185°F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
15. Any unverified component may cause unexpected damage. To ensure correct
installation, always use the components (e.g., screws) provided in the acces-
sory box.
16. CAUTION: The equipment is equipped with a battery-powered real-time clock
circuit. There is a risk of explosion if a battery is incorrectly replaced. Replace
only with the same or equivalent type as recommended by the manufacturer.
Discard all used batteries according to the manufacturer’s instructions.
17. Always disconnect the power cord from the chassis before manually handling
the hardware. Do not implement connections or configuration changes while the
device is powered on. Sudden power surges may damage sensitive electronic
components.
18. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator’s position should not exceed 70 dB (A).
19. DISCLAIMER: These instructions are provided according to IEC 704-1 specifi-
cations.
Advantech disclaims all responsibility for the accuracy of any statements con-
tained herein.
20. Use a power cord connected to a socket-outlet with a grounded connection.
21. This product is intended to be supplied by a UL-Listed power supply suitable for
use at minimum Tma 60°C (140°F) whose output meets ES1 (or SELV) and out-

ARK-3533 User Manual viii
put is rated: 9-36 Vdc, 25.5-6.3 A. Please contact Advantech for further informa-
tion.
22. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
Consignes de Sécurité
1. Veuillez lire attentivement ces instructions de sécurité.
2. Veuillez conserver ce manuel de l'utilisateur pour référence ultérieure.
3. Veuillez débrancher cet équipement de la prise secteur avant le nettoyage. Utili-
sez un chiffon humide. Ne pas utiliser de détergent liquide ou pulvérisé pour le
nettoyage. Utilisez une feuille ou un chiffon humide pour le nettoyage.
4. Pour les équipements enfichables, la prise de courant doit être à proximité de
l'équipement et doit être facilement accessible.
5. S'il vous plaît garder cet équipement de l'humidité.
6. Posez cet équipement sur une surface fiable lors de l'installation. Une chute ou
une chute pourrait causer des blessures.
7. La prise de courant doit avoir une connexion mise à la terre.
8. Placez le cordon d'alimentation de sorte que personne ne puisse marcher des-
sus.
Ne placez rien sur le cordon d'alimentation.
9. Tous les avertissements et mises en garde sur l'équipement doivent être notés.
10. Si l'appareil n'est pas utilisé pendant une longue période, débranchez-le du sec-
teur pour ne pas être endommagé par une surtension transitoire.
11. Ne jamais verser de liquide dans les ouvertures de ventilation; Cela pourrait
provoquer un incendie ou un choc électrique.
12. N'ouvrez jamais l'équipement. Pour des raisons de sécurité, seul le personnel
de maintenance qualifié doit ouvrir l'équipement.
13. Si l'une des situations suivantes se présente, faites vérifier le matériel par le
personnel de service:
–Le cordon d'alimentation ou la fiche est endommagé.
–Un liquide a pénétré dans l'appareil.
–L'équipement a été exposé à l'humidité.
–L'équipement ne fonctionne pas bien ou vous ne pouvez pas le faire.
fonctionner conformément au manuel d'utilisation.
–Equipment L'équipement est tombé et a été endommagé.
–Equipment L'équipement présente des signes évidents de rupture.
14. Ne laissez pas cet équipement dans un environnement où la température de
stockage peut être inférieure à -40°C (-40°F) ou supérieure à 85°C (185°F).
Cela pourrait endommager l'équipement. L'équipement doit être dans un envi-
ronnement contrôlé.
15. Tout composant non vérifié peut causer des dommages inattendus. Pour garan-
tir une installation correcte, veuillez toujours utiliser les composants (ex. Vis)
fournis avec la boîte d'accessoires.
16. ATTENTION: L'ordinateur est équipé d'un circuit d'horloge temps réel alimenté
par batterie. Il y a un risque d'explosion si la batterie est remplacée de manière
incorrecte. Remplacez uniquement avec le même type ou un type équivalent
recommandé par le fabricant. Jetez les piles usagées conformément aux
instructions du fabricant.
17. Débranchez toujours complètement le cordon d'alimentation de votre châssis
lorsque vous utilisez du matériel. Ne faites pas de connexion quand l'appareil

ix ARK-3533 User Manual
est sous tension. Les composants électroniques sensibles peuvent être endom-
magés par des surtensions soudaines.
18. Niveau de pression acoustique au poste de l'opérateur selon la norme CEI 704-
1: 1982 n'est pas supérieur à 70 dB (A).
19. AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à la
norme CEI 704-1. Advantech décline toute responsabilité quant à l'exactitude
des déclarations contenues dans ce.
20. Au moyen d'un cordon d'alimentation connecté à une prise de courant avec
mise à la terre.
21. Ce produit est destiné à être alimenté par un bloc d'alimentation homologué UL
adapté à une utilisation à Tma 60 degrés C min. dont la sortie est conforme à
ES1 (ou SELV) et dont la sortie est nominale: 9-36Vdc, 25.5-6.3A, si besoin
d'aide supplémentaire, veuillez contacter Advantech pour plus d'informations.
22. ZONE D'ACCÈS RESTREINT: L'équipement ne doit être installé que dans une
zone d'accès restreint.

ARK-3533 User Manual x

xi ARK-3533 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.2.1 General ......................................................................................... 2
1.2.2 Display .......................................................................................... 3
1.2.3 Ethernet ........................................................................................ 3
1.3 Chipset...................................................................................................... 3
1.3.1 Functional Specifications .............................................................. 3
Table 1.1: Processor ................................................................... 3
1.3.2 SUSI 4.0........................................................................................ 4
1.4 Mechanical Specifications......................................................................... 5
1.4.1 Dimensions ................................................................................... 5
Figure 1.1 ARK-3533 Mechanical Dimensions Diagram ............. 5
1.4.2 Weight........................................................................................... 6
1.5 Power Requirements................................................................................. 6
1.5.1 System Power............................................................................... 6
1.6 Operating Environment Specifications...................................................... 6
1.6.1 Operating Temperature................................................................. 6
1.6.2 Relative Humidity.......................................................................... 6
1.6.3 Storage Temperature.................................................................... 6
1.6.4 Safety............................................................................................ 6
1.6.5 EMC.............................................................................................. 6
Chapter 2 Hardware Configuration......................7
2.1 Introduction ............................................................................................... 8
2.2 Jumpers .................................................................................................... 8
2.2.1 Jumper Description....................................................................... 8
2.2.2 Jumper List ................................................................................... 8
Table 2.1: Jumper List ................................................................. 8
2.2.3 Jumper Locations.......................................................................... 9
Figure 2.1 Jumper Layout.......................................................... 10
2.2.4 Jumper Settings.......................................................................... 10
Table 2.2: CN7 Auto Power On Setting..................................... 10
Table 2.3: CLCMOS1 Clear CMOS Setting............................... 11
Table 2.4: JSETCOM1_V1 COM1 RI Power Setting................. 11
Table 2.5: CN20 M.2 B-Key Power Setting ............................... 11
Table 2.6: ERP Power Saving Mode Setting............................. 12
2.3 Connectors.............................................................................................. 12
2.3.1 ARK-3533 External I/O Locations............................................... 12
Figure 2.2 ARK-3533 Front and Rear I/O Connector Diagram.. 12
Figure 2.3 COM Connector........................................................ 13
Table 2.7: COM Connector Pin Assignments............................ 13
Figure 2.4 Ethernet Connector .................................................. 14
Table 2.8: Ethernet Connector Pin Assignments....................... 14
Figure 2.5 Power ON/OFF Button ............................................. 14
Figure 2.6 Audio Connector....................................................... 14
Figure 2.7 LED Indicators.......................................................... 15
Figure 2.8 HDMI Receptacle Connector.................................... 15
Table 2.9: HDMI Connector Pin Assignments ........................... 15
Figure 2.9 USB 3.0 Connector................................................... 16
Table 2.10:USB 3.2 Gen1/2 Connector Pin Assignments.......... 16
Table 2.11:USB 2.0 Pin Definition.............................................. 16
Figure 2.10DIO Connector.......................................................... 17

ARK-3533 User Manual xii
Table 2.12:DIO Connector Pin Assignment ............................... 17
Figure 2.11Remote Switch Connector........................................ 17
Figure 2.12 Phoenix Terminal Connector .................................. 18
Table 2.13:Phoenix Terminal Connector.................................... 18
Figure 2.13CAN Bus Connector................................................. 18
Table 2.14:CAN Bus Connector................................................. 18
2.4 Installation............................................................................................... 19
2.4.1 CPU/Memory Installation............................................................ 19
2.4.2 Remove the Bottom Cover ......................................................... 20
2.4.3 HDD/SSD Installation ................................................................. 21
2.4.4 M.2 Module Installation............................................................... 22
2.4.5 Mounting Kit Installation.............................................................. 23
2.4.6 Wide Operating Temperature Support........................................ 23
Chapter 3 BIOS Settings .................................... 25
3.1 Introduction ............................................................................................. 26
3.2 Entering Setup ........................................................................................ 27
3.2.1 Main Setup.................................................................................. 27
3.2.2 Advanced BIOS Features Setup................................................. 28
3.2.3 Chipset Configuration ................................................................. 73
3.2.4 Security..................................................................................... 101
3.2.5 Boot .......................................................................................... 103
3.2.6 Save & Exit ............................................................................... 104
3.2.7 NVMe RPMB Key Migration ..................................................... 105

Chapter 1
1General Information
This chapter details background
information on the ARK-3533
series.

ARK-3533 User Manual 2
1.1 Introduction
Advantech’s ARK-3533 is an intelligent, high-performance, fanless desktop system
powered by 12/13th Gen. Intel® Core™ LGA1700 and Core™ i3/i5/i7/i9 35W proces-
sors. ARK-3533 supports a maximum 35W processor and broad temperature ranges
(-20 ~ 60°C / -4 ~ 140°F). It also provides multiple I/O — up to 8 x COM, 4 x GbE, 4 x
USB 3.2 (2 x Gen2 + 2 x Gen1), 4 x USB 2.0, 2 x CAN Bus (optional), 1 x M.2 (B-
Key), 1 x M.2 (E-Key), 1 x Line out, TPM 2.0 (optional), and 2x 2.5" SATA III hard
drive bays.
Rugged Multi-Functional Design
ARK-3533 adopts an advanced thermal design for its desktop processor solution. All
models are fanless, and feature various quality features. These include wide operat-
ing temperatures (-20 ~ 60°C / -4 ~ 140°F), diverse expandability options, and struc-
tural strengthening. It supports diverse I/O interfaces — up to 4 x Intel® GbE, 4 x
USB 3.2 (2 x Gen2 + 2 x Gen1), 4 x USB 2.0, 2 x CAN Bus (optional), 2 x 2.5" HDD,
1 x M.2 (B-Key), 1 x M.2 (E-Key) 4 x RS-232/422/485, and 4 x RS-232 COM ports.
Built-In Intelligent Management Tools — Advantech SUSI API and WISE-Devi-
ceOn
The Advantech SUSI API provides a valuable suite of programmable APIs such as
multi-level watchdog, hardware monitoring, and other user-friendly interfaces.
SUSI API is an intelligent self-management cross-platform tool that monitors the sys-
tem’s status for problems and takes action in the event of abnormalities. SUSI API
offers a boot-up guarantee in critical, low-temperature environments so systems can
automatically recover when voltages dip. SUSI API makes the entire system more
reliable and intelligent. ARK-3533 also supports Advantech’s own WISE-DeviceOn,
which provides easy remote management so users can monitor, configure, and con-
trol a large number of terminals to make maintenance and system recovery simpler.
1.2 Product Features
1.2.1 General
CPU: 12th & 13th Gen. Intel® Core™ i3/i5/i7 LGA1151 desktop processor (up to
35W)
System Chipset: Intel® H610E
BIOS: AMI EFI 256Mbit
System Memory: DDR5 4800Mhz up to 64GB
Watchdog Timer: Single chip watchdog 255-level interval timer, set up by soft-
ware
I/O Interface: 4 x RS232/422/485, 4 x RS232
USB: 4 x USB 3.2 (2 x Gen2 + 2 x Gen1), 4 x USB 2.0 compliant ports
Audio: High Definition Audio (HD), Line-out/Mic-in
Storage: 2 x 2.5" HDD drive bays (9.5 mm / 0.374 in height)
Expansion Interface:
–1 x M.2 with SIM holder (B-Key for NVME, SATA, LTE/5G modules)
–1 x M.2 (E-Key for Wi-Fi, suggested installation at Advantech manufacturing)
–Add-On Card Slot: AMO-R040 (by option) for 2 x PCI
TPM: TPM 2.0 (Optional)

3 ARK-3533 User Manual
Chapter 1 General Information
1.2.2 Display
Controller: According to customer-specified CPU selection
Resolution:
–HDMI: supports HDMI 2.0, 4096x 2160 @ 60 Hz
Dual Display:
–HDMI + HDMI (Default)
–DP + DP (Supported by project)
–DP + HDMI (Supported by project)
1.2.3 Ethernet
Chipset:
–LAN1 Intel® i219-LM
–LAN2/3/4 Intel® i226-V
Speed:
–LAN1 10/100/1000 Mbps
–LAN2/3/4 10/100/1000/2500 Mbps
1.3 Chipset
1.3.1 Functional Specifications
1.3.1.1 Processor
1.3.1.2 Chipset
Internal Graphics Features
DirectX 12, OpenGL 4.5
HDMI + HDMI (DP supported by project)
Intel® Display Power saving technology 6.0
Video Accelerator
HW accelerated Media Decode: H.265/HEVC, H.264/MPEG-4 AVC, MPEG-2,
VC-1/WMV9, JPEG/MJPEG, VP8 and VP9
HW accelerated Media Encode: H. H.265/HEVC, H.264/MPEG-4 AVC, MPEG-
2, JPEG/MJPEG and VP8
SATA Interface
Supports several optional selections of Serial ATA III
Supports SATA data transfer rates of up to 6 Gb/s
Integrated AHCI controller
USB Interface
1 x XHCI Host Controller, supporting SuperSpeed USB 3.2 Gen1/Gen2
1 x EHCI Host Controllers, supporting HighSpeed USB 2.0 ports
Supports wake-up from sleep states S3
USB1/2 Maximum 1.9A
Table 1.1: Processor
Processor Supports 12th and 13th Gen. Intel® LGA1700 processor (up to 35W)
Memory Supports DDR5 4800 MHz up to 64GB
2 x 262-pin SODIMM socket type

ARK-3533 User Manual 4
Power Management
Supports ACPI
ACPI-defined power states (processor-driven C states)
ACPI Power Management Timer
SMI# generation
1.3.1.3 Others
Serial Ports
Up to 8 x serial ports
Supports IRQ sharing among serial ports under Microsoft
COM1, COM2, COM5, COM6: RS-232/422/485
COM3, COM4, COM7, COM8: RS-232
Ethernet
LAN1 Intel i219LM, LAN2/3/4 Intel i226-V
I219LM Support up to 10/100/1000 Mbps
I226V Support up to 10/100/1000/2500Mbps
LAN Connectors: Phone Jack RJ45 8P 90D (F)
Audio
Audio Codec: ALC888S-VD2-GR
Compliant with HD Audio specifications
Supports 16/20/24-bit DAC and 16/20/24-bit ADC resolution
Supports: Line-out, Mic-in
Audio Connectors: 1 x headphone jack *
Battery Backup
Battery 3V/210 mAh with WIRE x 1
TPM 2.0
1.3.2 SUSI 4.0
SUSI API
Sequence control supported
DIO 16-bit programmable DIO
Watchdog timer multi-level WDT
Programmable 1-255 sec/min
Hardware monitor CPU temperature / input current / input voltage
System information running HR / boot record
Two CAN Bus ports supported

5 ARK-3533 User Manual
Chapter 1 General Information
1.4 Mechanical Specifications
1.4.1 Dimensions
200 x 75 x 215 mm / 7.87 x 2.95 x 8.46 in (W x H x D)
Figure 1.1 ARK-3533 Mechanical Dimensions Diagram

ARK-3533 User Manual 6
1.4.2 Weight
3.2 kg (7 lb)
1.5 Power Requirements
1.5.1 System Power
Minimum Power Input: 9 ~ 36 VDC
Optional Adapter:
–150W @19V/7.89A power adapter (optional)
–230W @ 24V/9.58A power adapter (optional)
1.6 Operating Environment Specifications
1.6.1 Operating Temperature
With extended peripherals: -20 ~ 60°C (-4 ~ 140°F) with 0.7 m/s airflow
1.6.2 Relative Humidity
95% @ 40°C (104°F) (non-condensing)
1.6.3 Storage Temperature
-40 ~ 85°C (-4 ~ 185°F)
1.6.4 Safety
UL, CB, CCC, BSMI
1.6.5 EMC
CE/FCC Class B, CCC, BSMI

Chapter 2
2Hardware
Configuration

ARK-3533 User Manual 8
2.1 Introduction
The following sections show the internal jumper settings and the external connector
pin assignments for different applications.
2.2 Jumpers
2.2.1 Jumper Description
You may configure ARK-3533 to match the needs of your application by setting jump-
ers. A jumper is a metal bridge used to close an electric circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To close a jumper, you connect the pins with the clip. To
open a jumper, remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
2.2.2 Jumper List
Open Closed Closed 2-3
1 2 1 2
Table 2.1: Jumper List
CN7 Auto Power On Setting
CLCMOS1 Clear CMOS
JSETCOM1_V1 COM1 RI power setting
CN20 M.2 B-Key Power selection
ERP1 ERP Mode setting