Advantech PCM-9563N-S1A1E User manual

User Manual
PCM-9563

PCM-9563 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2017
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
Part No. 2006956300 Edition 1
Printed in China November 2017

iii PCM-9563 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

PCM-9563 User Manual iv
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
1 x PCM-9563 SBC
1 x Startup manual
1 x mini jumper pack 9689000002
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.

v PCM-9563 User Manual
Ordering Information
Model Number Description
* By request
Optional Accessories
Model Name CPU Memory VGA LVDS HDMI* DP* eDP* GbE 1 SATAIII mSATA HD
Audio RS- 422/485 RS-232 USB 3.0 USB 2.0 miniPCIe M.2 E key PCI-104
PCM-9563N-S1A1E Intel Celeron
N3350 SODIMM 1 1 - - - 2 1 1 V 2 4 2 6 1 1 Yes
PCM-9563NF-S2A1E Intel Pentium
N4200 SODIMM 1 1 - - - 3 2 - V 2 4 2 6 1 1 Yes
PCM-9563NF-S1A1E Intel Celeron
N3350 SODIMM 1 1 - - - 3 2 - V 2 4 2 6 1 1 Yes
Part Number Description
PCM-10586-9563E Wiring kit for PCM-9563 Series
PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits
PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits
PCM-200-00A2E PC/104-Plus to PCI bus module
CF-HDD-ADP CompactFlash 50-pin to IDE 44-pin adapter
TBD Hearspreader 157.4 x 100 x 24 mm

PCM-9563 User Manual vi
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

vii PCM-9563 User Manual
Wichtige Sicherheishinweise
1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie
Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch
zur Reinigung.
4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugän-
glich sein.
5. Das Gerät ist vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen
oder Fallen könnte Verletzungen hervorrufen.
7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-
zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.
8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.
9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es
sollte auch nichts auf der Leitung abgestellt werden.
10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom
Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung
vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in
das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-
lösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen
Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen
und von einer qualifizierten Servicestelle zu überprüfen:
15. Netzkabel oder Netzstecker sind beschädigt.
16. Flüssigkeit ist in das Gerät eingedrungen.
17. Das Gerät war Feuchtigkeit ausgesetzt.
18. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder
Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.
19. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
20. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
21. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batterie.Ersatz
nur durch densellben order einem vom Hersteller empfohlene-mahnlichen Typ.
Entsorgung gebrauchter Batterien navh Angaben des Herstellers.
22. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach-
männische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher oder
entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Batterien
nach Anweisung des Herstellers.
23. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt
70dB(A) oder weiger.
Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-
704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in die-
sem Zusammenhang getätigten Aussagen ab.

PCM-9563 User Manual viii
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.

ix PCM-9563 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Product Specifications............................................................................... 2
1.3 Chipset ...................................................................................................... 3
1.3.1 Functional Specifications .............................................................. 3
1.3.2 Mechanical Specifications............................................................. 4
1.3.3 Electrical Specifications ................................................................ 4
1.3.4 Environmental Specifications........................................................ 4
Chapter 2 Hardware Installation ..........................5
2.1 Jumpers .................................................................................................... 6
2.1.1 Jumper Description ....................................................................... 8
2.2 Connectors................................................................................................ 9
2.2.1 Connector List............................................................................... 9
2.3 Mechanical .............................................................................................. 10
2.3.1 Jumper and Connector Location................................................. 10
Figure 2.1 Jumper and Connector Layout (Component Side)... 10
Figure 2.2 Jumper and Connector Layout (Solder Side) ........... 10
2.3.2 Board Dimensions....................................................................... 11
Figure 2.3 Board Dimension Layout (Component Side)............ 11
Figure 2.4 Board Dimension Layout (Solder Side) .................... 12
Chapter 3 BIOS Settings.....................................13
3.1 Entering Setup ........................................................................................ 14
3.1.1 Main Setup.................................................................................. 14
3.1.2 Advanced BIOS Features Setup................................................. 15
3.1.3 Chipset Configuration ................................................................. 24
3.1.4 Security ....................................................................................... 34
3.1.5 Boot............................................................................................. 35
3.1.6 Save & Exit ................................................................................. 36
Chapter 4 Extension I/O Installation..................39
Appendix A Pin Assignments ...............................43
Appendix B Optional Extras for PCM-9563 A1 ....75
B.1 PCM-10586-9563E Cable kit for PCM-9563 ........................................... 76
Table B.1: PCM-10586-9562E Cable kit for PCM-9562 A1....... 76
Appendix C System Assignments ........................77
C.1 1st MB Memory Map ............................................................................... 78
Table C.1: 1st MB memory map ................................................ 78
C.2 DMA Channel Assignments .................................................................... 78
Table C.2: DMA channel assignments....................................... 78

PCM-9563 User Manual x
C.3 Interrupt Assignments ............................................................................. 78
Table C.3: Interrupt assignments............................................... 78
Table C.4: System I/O Ports ...................................................... 79

Chapter 1
1General Information

PCM-9563 User Manual 2
1.1 Introduction
Intel®Pentium N4200 Celeron N3350 & Atom™E3950/E3940/E3930 processor
EBX form factor standard, supports PCI-104
One SODIMM up to 8G DDR3L 1867MHz
Dual Display: VGA + LVDS(Displayport *) + HDMI * (Displayport)
Supports 6 x USB 2.0, 2 x USB 3.0
Supports 2 x SATAIII
Supports up to 6 x COM (Support Auto flow control)
Supports up to 2 x Watchdog Timer
Supports up to 3 x Intel Giga Ethernet support
Supports Wake-on-LAN, Wake-on-Modem
Power off protection and Software I2C API support
1.2 Product Specifications
General
I/O
Ethernet
Display
CPU Intel Pentium N4200 Celeron N3350 & Atom™E3950/
E3940/E3930
L2 Cache 2MB
System Chipset
BIOS AMI 64 Mbit
System Memory One SODIMM up to 8G DDR3L 1867MHz
Power Management ACPI support
Expansion Interface Supports PCI-104, PCI slot x1, Mini PCIe
Battery Lithium 3 V / 210 mAH
I/O Interface 1x PS/2, 1x KB/Mouse,1x Reset Button,1x SMBUS, 1x I2C, 1x LTP, 4
x (RS-232), 2 x RS-422/485
USB 6 x USB 2.0 2 x USB 3.0 compliant Ports
Audio ACL888, Line-in, Line-out, Mic-in, speaker out (R/L)
GPIO 16-bit general purpose
Chipset i210
Speed 10/100/1000Mbps
Interface 3 (RJ-45 connector through the cable and GbE3 is full version only)
Standard Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
8023y, IEEE 802.ab
Controller Intel® Gen9 Graphic engine
VRAM Shared Memory Architecture up to 224 MB system memory
LVDS LCD Single channel 48-bit LVDS up to 1920 x 1200
VGA Maximum Resolution up to 1920 x 1200
Dual Independent Display VGA+ LVDS/eDP*+ HDMI*/DP*

3 PCM-9563 User Manual
Chapter 1 General Information
1.3 Chipset
1.3.1 Functional Specifications
1.3.1.1 Processor
Intel Pentium N4200 Celeron N3350 & Atom™E3950/E3940/E3930 processor
1.1/1.1/1.6/1.6/1.3 GHz
CPU Process: 45nm.
1.3.1.2 Chipset
1.3.1.3 Others
Controller Hub Intel Pentium N4200 Celeron N3350 & Atom™E3950/
E3940/E3930 processor 1.1/1.1/1.6/1.6/1.3 GHz
Memory DDR3L 1867MHz
Multi Display VGA+ LVDS/eDP*+ HDMI*/DP*
VGA Memory Up to 224 MB of dynamic video memory allocation
Display VGA: Supports QXGA Up to 1920 x 1200
LVDS: Single channel 48-bit LVDS up to 1920 x 1200
Internal Graphics Features
3D HW Acceleration: DirectX* 12.3/12,
4K Decode fo rHEVC4, H.264, VP8;
4K Encode forH.264, VP8
Ethernet
Chipset
GbE 1 : Intel i210
GbE 2: Intel i210
GbE 3: Intel i210
IEEE Compliant Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
8023y, IEEE 802.ab
Disable LAN through BIOS Yes
Driver Support Win 10, Android, Linux, QNX
Audio
Codec HD Audio, ALC888 Codec
Connector Line in, Line out, Mic in, Speak out (R/L, 8 Ohm 1W/4Ohm
2W)
Hardware Monitor
Super I/O LPC I/O for onboard alarm
SCH3106
Fan
1. Smart FAN Support.
2. Programmable automatic fan monitor based on tempera-
ture.
3. 2 pin connector for LED indication when fan fail or system
abnormal.
4. System FAN Power Connector x 1
5. Reserve CPU FAN Power Connector x 1
Pin2: +12 V
Pin3: Fan speed signal input
Temperature CPU Temperature
Voltage 3.3 V,+5 V, +12 V, Vcore
PCI Compliant
Chipset follow PCIe bridge XIO2001IZGU

PCM-9563 User Manual 4
1.3.2 Mechanical Specifications
1.3.2.1 Dimensions
203mm(L*146mm(W) mm (8" x 5.75 inches)
1.3.2.2 Height
top side 19mm, PCB 1.6mm, bottom side 6.8mm, total 27.4mm
1.3.2.3 Weight
700 g (1.54 lb) (with heatsink) (reference weight of total package)
1.3.3 Electrical Specifications
1.3.3.1 Power Supply Voltage
Power Type
AT/ATX
Power Supply Voltage
ATX: 12 V ± 10%
AT: 12 V ±10% only
1.3.3.2 Power Consumption
Power Consumption (Typical)
PCM-9563E-S7A1E with E3950:0.64@12V(7.68W)
Power Consumption (Max, test in HCT)
PCM-9563E-S7A1E with E3950:1.03A@12V(12.38W)
1.3.3.3 RTC Battery
Typical Voltage: 3.0 V
Normal discharge capacity: 210 mAh
1.3.4 Environmental Specifications
1.3.4.1 Operating Temperature
Operating temperature: 0 ~ 60°C (32~140°F)
1.3.4.2 Operating Humidity
Operating Humidity: 0% ~ 90% Relative Humidity, non-condensing
1.3.4.3 Storage Temperature
Standard products (0~60°C)
Storage temperature: -40~85°C
1.3.4.4 Storage Relative Temperature
Standard products (0~60°C)
Relative humidity: 95% @ 60°C
Phoenix products (-20~80°C)
Relative humidity: 95% @ 60°C
Platinum Phoenix products (-40~85°C)
Relative humidity: 95% @ 60°C

Chapter 2
2Hardware Installation

PCM-9563 User Manual 6
This chapter explains the setup procedures of the PCM-9563 A1 hardware, including
instructions on setting jumpers and connecting peripherals, switches, indicators and
mechanical drawings. Be sure to read all safety precautions before you begin the
installation procedure.
2.1 Jumpers
J1 Clear CMOS
Part Number 1653003101
Footprint HD_3x1P_79_D
Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS
Setting Function
(1-2)* Normal
(2-3) Clear COMS
J2 Auto Power On Setting
Part Number 1653002101
Footprint HD_2x1P_79_D
Description PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb
Setting Function
NC Power Button for Power On
(1-2)* Auto Power On
J3 PCI104 VIO Setting
Part Number 1653003101
Footprint HD_3x1P_79_D
Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS
Setting Function
(1-2) +5V
(2-3)* +3.3V

7 PCM-9563 User Manual
Chapter 2 Hardware Installation
J4 LCD Power
Part Number 1653003260
Footprint HD_3x2P_79
Description PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050
Setting Function
(1-3)* +3.3V
(3-5) +5V
(3-4) +12V
J5 LVDS VCON Setting
Part Number 1653000014
Footprint HD_2x2P_79
Description PIN HEADER 2x2P 2.00mm 180D(M) SMD 21N22050
Setting Function
(1-2)* 3.3V High for VCON on LVDS
(1-3) Low for VCON on LVDS
J6 COM5 RS422/485 Setting
Part Number 1653003101
Footprint HD_3x1P_79_D
Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS
Setting Function
(1-2)* RS485
(1-3) RS422
J7 COM6 RS422/485 Setting
Part Number 1653003101
Footprint HD_3x1P_79_D
Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS
Setting Function
(1-2)* RS485
(1-3) RS422

PCM-9563 User Manual 8
2.1.1 Jumper Description
Cards can be configured by setting jumpers. A jumper is a metal bridge used to close
an electric circuit. It consists of two metal pins and a small metal clip (often protected
by a plastic cover) that slides over the pins to connect them. To close a jumper, you
connect the pins with the clip. To open a jumper, you remove the clip. Sometimes a
jumper will have three pins, labeled 1, 2 and 3. In this case you would connect either
pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes.
J8 PCI VIO Setting
Part Number 1653003101
Footprint HD_3x1P_79_D
Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS
Setting Function
(1-2) +5V
(2-3)* +3.3V
Warning! To avoid damaging the computer, always turn off the power supply
before setting jumpers to clear CMOS. Before turning on the power sup-
ply, set the jumper back to 3.0 V Battery On.

9 PCM-9563 User Manual
Chapter 2 Hardware Installation
2.2 Connectors
Onboard connectors link the PCM-9563 to external devices such as hard disk drives,
a keyboard, or floppy drives. The table below lists the function of each of the connec-
tors.
2.2.1 Connector List
CN1 12V Power Input
CN3 Standby Power Input
CN4 5V power output
CN5 Battery
CN6 SODIMMDDR3RVS_204
CN8 Power Switch
CN9 Reset
CN10 Audio
CN11 LAN1
CN12 LAN1/2 LED
CN13 LAN2
CN14 LAN3
CN15 PCI-104
CN16 SIM
CN17 Mini PCIE
CN18 SATA
CN19 SATA
CN20 mSATA
CN21 M.2 E Key
CN22 COM1/COM2
CN23 COM3/COM4
CN24 COM5/COM6
CN25 Inverter Power Output
CN26 48 bits LVDS Panel
CN27 VGA
CN28 HDMI
CN29 eDP
CN30 Internal USB
CN31 Internal USB
CN32 Internal USB
CN33 Internal USB 3.0
CN34 LPT
CN35 PS2
CN36 I2C
CN37 SMBus
CN38 GPIO 0-7
CN39 GPIO 8-15
CN40 System Fan
CN45 PCI Slot
CN46 PWR/HD/LAN3 LED
CN48 PCI-104 -12V Input

PCM-9563 User Manual 10
2.3 Mechanical
2.3.1 Jumper and Connector Location
Figure 2.1 Jumper and Connector Layout (Component Side)
Figure 2.2 Jumper and Connector Layout (Solder Side)
CN25
CN36
CN1
CN3
CN9
CN45
CN15
CN26
CN29
CN33
CN11
CN13
CN14
CN27
CN19
CN22
CN23
CN24
CN35
CN10
CN40
CN4
CN8
CN37
CN28
CN18
CN30
CN31
CN32
CN12
CN46 CN38 CN39
CN34
CN48 CN5
CN6
CN20
CN17
CN21
C
N
CN16