Advantech WISE-5000 Series User manual

User Manual
WISE-5000 Series
EtherCAT Slice I/O Modules

WISE-5000 Slice I/O Series User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2019
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. Edition 1
Printed in Taiwan November 2019

iii WISE-5000 Slice I/O Series User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
FM
This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (OS, version, application software, etc.)
–A complete description of the problem
–The exact wording of any error messages
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush of
power as you connect a jumper or install a card may damage sensitive electronic
components.

WISE-5000 Slice I/O Series User Manual iv
Safety Instructions
1. Install the system only in area with restricted access.
2. Read these safety instructions carefully.
3. Keep this User Manual for later reference.
4. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
5. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
6. Keep this equipment away from humidity.
7. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
8. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
9. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
10. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
13. Never pour any liquid into an opening. This may cause fire or electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
15. If one of the following situations arises, get the equipment checked by service
personnel:
16. The power cord or plug is damaged.
17. Liquid has penetrated into the equipment.
18. The equipment has been exposed to moisture.
19. The equipment does not work well, or you cannot get it to work according to the
user's manual.
20. The equipment has been dropped and damaged.
21. The equipment has obvious signs of breakage.
22. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
23. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
24. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

v APAX-5000 I/O Series User Manual
Contents
Chapter 1 Introduction..........................................1
1.1 Introduction to WISE-5000 slice I/O module ............................................. 2
Table 1.1: Table 1.1: WISE-5000 series extension modules....... 2
Chapter 2 Hardware Installation ..........................5
2.1 Install / Remove the module...................................................................... 6
2.1.1 Attach on the DIN-rail.................................................................... 6
Figure 2.1 WISE-5000 installed in control cabinet....................... 6
2.1.2 Remove from the DIN-rail ............................................................. 7
Figure 2.2 Release the latch to remove the module .................... 7
Figure 2.3 WISE-5000 slice I/O module design........................... 7
2.2 I/O Wiring .................................................................................................. 7
Chapter 3 Infrastructure .......................................9
3.1 AWISE-5001 Smart Power Input Module with 4-ch DI............................ 10
Figure 3.1 WISE-5001 Module .................................................. 10
3.1.1 WISE-5001 Application ............................................................... 11
Figure 3.2 WISE-5001 Application............................................. 11
3.1.2 WISE-5001 Specification ............................................................ 11
3.1.3 LED Indicator .............................................................................. 12
Figure 3.3 WISE-5001 Module LED Indicator............................ 12
3.1.4 Pin Definition............................................................................... 13
Figure 3.4 WISE-5001 Module Front View ................................ 13
Figure 3.5 WISE-5001 Module Side View) ................................ 13
Table 3.1: Upper 4 Pin Connector ............................................. 14
Table 3.2: Lower 8 Pin Connector ............................................. 14
3.1.5 Application Wiring ....................................................................... 14
Figure 3.6 Wiring for WISE-5001 Digital Input........................... 14
Figure 3.7 Wiring for WISE-5001 Power Input........................... 15
3.1.6 Object Description and Parameterization ................................... 15
3.2 WISE-5074 EtherCAT Coupler with ID Switch........................................ 16
Figure 3.8 WISE-5074 Module .................................................. 16
3.2.1 WISE-5074 Specification ............................................................ 16
3.2.2 LED Indicator .............................................................................. 17
Figure 3.9 WISE-5074 Module LED Indicator............................ 17
3.2.3 ID Switch..................................................................................... 18
Figure 3.10WISE-5074 ID Switch ............................................... 18
3.2.4 Pin Definition............................................................................... 19
Figure 3.11WISE-5074 Module Front View ................................ 19
Figure 3.12WISE-5074 Module Side View ................................. 19
Table 3.3: Upper 4 Pin Connector ............................................. 20
Table 3.4: Lower 2 LAN Port ..................................................... 20
3.2.5 Application Wiring ....................................................................... 20
Figure 3.13Wiring for WISE-5074 Power Input........................... 20
3.2.6 Object Description and Parameterization ................................... 20
3.3 WISE-5079 EtherCAT Extension ............................................................ 21
Figure 3.14WISE-5074 Module .................................................. 21
3.3.1 WISE-5079 Specification ............................................................ 21
3.3.2 Pin Definition............................................................................... 22
Figure 3.15WISE-5079 Module Front View ................................ 22
Figure 3.16WISE-5079 Module Side View ................................. 23

APAX-5000 I/O Series User Manual vi
Table 3.5: LAN Port................................................................... 23
Chapter 4 Analog Input/Output Modules..........25
4.1 WISE-5017C 6-ch Current Input Module ................................................ 26
Figure 4.1 WISE-5017C Module................................................ 26
4.1.1 WISE-5017C Specification ......................................................... 27
4.1.2 LED Indicator .............................................................................. 27
Figure 4.2 WISE-5017C Module LED Indicator......................... 27
4.1.3 Pin Definition............................................................................... 28
Figure 4.3 WISE-5017C Module Front View ............................. 28
Figure 4.4 WISE-5017C Module Side View............................... 29
Table 4.1: Upper 4 Pin Connector............................................. 29
Table 4.2: Lower 8 Pin Connector............................................. 29
4.1.4 Application Wiring ....................................................................... 30
Figure 4.5 Wiring for WISE-5017C ............................................ 30
4.1.5 Object Description and Parameterization ................................... 30
4.2 WISE-5017V 6-ch Voltage Input Module ................................................ 32
Figure 4.6 WISE-5017V Module................................................ 32
4.2.1 WISE-5017V Specification.......................................................... 33
4.2.2 LED Indicator .............................................................................. 33
Figure 4.7 WISE-5017 Module LED Indicator ........................... 33
4.2.3 Pin Definition............................................................................... 34
Figure 4.8 WISE-5017V Module Front View.............................. 34
Figure 4.9 WISE-5017V Module Side View............................... 35
Table 4.3: Upper 4 Pin Connector............................................. 35
Table 4.4: Lower 8 Pin Connector............................................. 35
4.2.4 Application Wiring ....................................................................... 36
Figure 4.10Wiring for WISE-5017V ............................................ 36
4.2.5 Object Description and Parameterization ................................... 36
Chapter 5 Digital Module ...................................39
5.1 WISE-5051 8-ch Digital Input Module..................................................... 40
Figure 5.1 WISE-5051 Module .................................................. 40
5.1.1 WISE-5051 Specification ............................................................ 40
5.1.2 LED Indicator .............................................................................. 41
Figure 5.2 WISE-5051 Module LED Indicator ........................... 41
5.1.3 Pin Definition............................................................................... 42
Figure 5.3 WISE-5051 Module Front View ................................ 42
Figure 5.4 WISE-5051 Module Side View ................................. 42
Table 5.1: Upper 4 Pin Connector............................................. 43
Table 5.2: Lower 8 Pin Connector............................................. 43
5.1.4 Application Wiring ....................................................................... 43
Figure 5.5 Wiring for WISE-5051............................................... 43
5.1.5 Object Description and Parameterization ................................... 44
5.2 WISE-5052 16-ch Digital Input Module................................................... 44
Figure 5.6 WISE-5052 Module .................................................. 44
5.2.1 WISE-5052 Specification ............................................................ 45
5.2.2 LED Indicator .............................................................................. 46
Figure 5.7 WISE-5052 Module LED Indicator ........................... 46
5.2.3 Pin Definition............................................................................... 46
Figure 5.8 WISE-5051 Module Front View ................................ 46
Figure 5.9 WISE-5051 Module Side View ................................. 47
Table 5.3: Upper 6Pin Connector.............................................. 47
Table 5.4: Lower 8 Pin Connector............................................. 47
5.2.4 Application Wiring ....................................................................... 48
Figure 5.10Wiring for WISE-5052............................................... 48
5.2.5 Object Description and Parameterization ................................... 48

vii APAX-5000 I/O Series User Manual
5.3 WISE-5056 8-ch Sink-type Digital Output Module .................................. 49
Figure 5.11WISE-5056 Module .................................................. 49
5.3.1 WISE-5056 Specification ............................................................ 49
5.3.2 LED Indicator .............................................................................. 50
Figure 5.12WISE-5056 Module LED Indicator............................ 50
5.3.3 Pin Definition............................................................................... 51
Figure 5.13WISE-5056 Module Front View ................................ 51
Figure 5.14WISE-5056 Module Side View ................................. 51
Table 5.5: Upper 4 Pin Connector ............................................. 52
Table 5.6: Lower 8 Pin Connector ............................................. 52
5.3.4 Application Wiring ....................................................................... 52
Figure 5.15Wiring for WISE-5056............................................... 52
5.3.5 Object Description and Parameterization ................................... 53
5.4 WISE-5056SO 8-ch Source-type Digital Output Module......................... 53
Figure 5.16WISE-5056SO Module ............................................. 53
5.4.1 WISE-5056SO Specification ....................................................... 54
5.4.2 LED Indicator .............................................................................. 54
Figure 5.17WISE-5056SO Module LED Indicator ...................... 54
5.4.3 Pin Definition............................................................................... 55
Figure 5.18WISE-5056SO Module Front View ........................... 55
Figure 5.19WISE-5056SO Module Side View ............................ 56
Table 5.7: Upper 4 Pin Connector ............................................. 56
Table 5.8: Lower 8 Pin Connector ............................................. 56
5.4.4 Application Wiring ....................................................................... 57
Figure 5.20Wiring for WISE-5056SO.......................................... 57
5.4.5 Object Description and Parameterization ................................... 57
5.5 WISE-5057 16-ch Sink-type Digital Output Module ................................ 58
Figure 5.21WISE-5057 Module .................................................. 58
5.5.1 WISE-5056 Specification ............................................................ 58
5.5.2 LED Indicator .............................................................................. 59
Figure 5.22WISE-5057 Module LED Indicator............................ 59
5.5.3 Pin Definition............................................................................... 60
Figure 5.23WISE-5057 Module Front View ................................ 60
Figure 5.24WISE-5057 Module Side View ................................. 60
Table 5.9: Upper 6 Pin Connector ............................................. 61
Table 5.10:Lower 12 Pin Connector ........................................... 61
5.5.4 Application Wiring ....................................................................... 61
Figure 5.25Wiring for WISE-5057............................................... 61
5.5.5 Object Description and Parameterization ................................... 62
5.6 WISE-5057SO 16-ch Source-type Digital Output Module....................... 62
Figure 5.26WISE-5057SO Module ............................................. 63
5.6.1 WISE-5057SO Specification ....................................................... 63
5.6.2 LED Indicator .............................................................................. 64
Figure 5.27WISE-5057SO Module LED Indicator ...................... 64
5.6.3 Pin Definition and Wiring............................................................. 65
Figure 5.28WISE-5057SO Module Front View ........................... 65
Figure 5.29WISE-5057SO Module Side View ............................ 65
Table 5.11: Upper 6 Pin Connector ............................................. 66
Table 5.12:Lower 12 Pin Connector ........................................... 66
5.6.4 Application Wiring ....................................................................... 66
Figure 5.30Wiring for WISE-5057SO.......................................... 66
5.6.5 Object Description and Parameterization ................................... 67

APAX-5000 I/O Series User Manual viii

Chapter 1
1Introduction

WISE-5000 Slice I/O Series User Manual 2
1.1 Introduction to WISE-5000 slice I/O module
This manual will only introduce the WISE-5000 series slice I/O modules. To know
more about WISE-5580 controller and WISE-5400 series extension modules, please
download WISE-5580 user manual from our website.
Advantech provides different I/O modules for various applications. The following
table outlines Advantech's supported I/O modules.
Table 1.1: Table 1.1: WISE-5000 series extension modules
Module Name Specifications
Power WISE-5001
Power Input Module
- 24VDC power input for Slice IO*
- Abnormal Voltage detection
- 4DI / Wet Contact
* This should be the first module to start the right
hand-side slice IO after WISE-5580. It can also
be added between WISE-50XX modules to pro-
vide extra power.
Analog I/O
WISE-5015
4-Ch RTD Input module
- 2 or 3 wire RTD sensor
- Pt100, Pt1000, Balco500, Ni518
- 100Hz sample rate per channel
WISE-5017V
6-Ch Voltage Input Module
- Voltage Input
- 16-bit resolution
- 100Hz sample rate per channel
WISE-5017C
6-Ch Current Input Module
- Current Input
- 16-bit resolution
- 100Hz sample rate per channel
- Support wire burn-out detection
WISE-5018
6-Ch Thermocouple Input Module
- Support J/K/T/E/R/S/B type
- 16-bit resolution
- 100Hz sample rate per channel
- Support wire burn-out detection
WISE-5024
4-Ch Analogue Output Module
- Voltage and Current
- 16-bit resolution
- Fail-safe value output

3 WISE-5000 Slice I/O Series User Manual
Chapter 1 Introduction
Digital I/O
WISE-5051
8-Ch Isolated Digital Input Module
- DI Voltage: 10~30VDC
- Filter : 3ms
WISE-5052
16-Ch Isolated Digital Input Module
- DI Voltage: 10~30VDC
- Filter: 3ms
WISE-5056
8-Ch Isolated Digital Output Module
- Sink Type
- DO Voltage: 10~30VDC
WISE-5056SO
8-Ch Isolated Digital Output Module
- Source Type
- DO Voltage: 10~30VDC
WISE-5057
16-Ch Isolated Digital Output Module
- Sink Type
- DO Voltage: 10 ~30VDC
WISE-5057SO
16-Ch Isolated Digital Output Module
- Source Type
- DO Voltage: 10~30VDC
Counter WISE-5080
2-Ch Counter/Encoder Input Module
- Counter Range: 32-bit
- Mode: Frequency, Counter
- Counter Mode: up/down, bi-direction, A/B
Phase
Extension/Coupler
WISE-5074
EtherCAT Bus Coupler
- 24VDC power input
- 2xRJ45
- Abnormal Voltage detection
*This module contains power input function, no
need another WISE-5001 to be the first power
supply module
WISE-5079 EtherCAT Bus Extension
- Extend EtherCAT by RJ45

WISE-5000 Slice I/O Series User Manual 4

Chapter 2
2Hardware Installation

APAX-5000 I/O Series User Manual 6
2.1 Install / Remove the module
WISE-5000 series has easy-install design to help you install and maintain your mod-
ules easily.
2.1.1 Attach on the DIN-rail
Please follow below steps to secure WISE-5000 modules on the DIN-rail:
1. Unlock the latches at the bottom of WISE-5000 module.
2. Plug in the module each by each from the left to the right.
3. Make sure the modules are attached on the DIN-rail.
4. Lock on the latches.
Figure 2.1 WISE-5000 installed in control cabinet

7 APAX-5000 I/O Series User Manual
Chapter 2 Hardware Installation
2.1.2 Remove from the DIN-rail
You can easily detach the module by release the latch at the bottom of the module. Then
you can draw out the module without any difficulty.
Figure 2.2 Release the latch to remove the module
Figure 2.3 WISE-5000 slice I/O module design
2.2 I/O Wiring
WISE-5000 I/O modules leverage detachable clamp type terminal blocks. Comparing
with traditional screw type terminal blocks, clamp type terminal blocks can save wiring
time and provide better reliability for shock and vibration. Follow the procedures below for
wiring your WISE-5000 I/O module.
1. Use the screw driver to press the left notch on the terminal.\
2. Insert the wire into the terminal.
Note! Please use # 14 AWG ~ 28 AWG wire for terminal block.

APAX-5000 I/O Series User Manual 8

Chapter 3
3Infrastructure

APAX-5000 I/O Series User Manual 10
3.1 AWISE-5001 Smart Power Input Module with 4-
ch DI
WISE-5001 is a smart power input module. It supports dual power input for the exter-
nal 24VDC power input, and supply maximum 2A current to the EtherCAT bus to
empower the IO modules on the right side.
WISE-5001 has smart diagnostic function to identify the power error on the external
power supply and on internal bus. The status can be shown on the LED and on the
process data.
Besides power input function, WISE-5001 also equips 4-ch wet contact DI for user to
connect to the system event.
Figure 3.1 WISE-5001 Module

11 APAX-5000 I/O Series User Manual
Chapter 3 Infrastructure
3.1.1 WISE-5001 Application
The WISE-5580 controller does not provide power to the right side EtherCAT bus, so
WISE-5001 must be the first module from the right side to provide independent
power to the EtherCAT bus.
In configuration with large number of IO modules, it is possible to use another WISE-
5001 to provide extra 2A to the EtherCAT bus. It supply power to the modules follow-
ing on the right side, and isolate from the power on the left side. Please refer to the
following diagram for the detail.
Figure 3.2 WISE-5001 Application
3.1.2 WISE-5001 Specification
3.1.2.1 General
Certification: CE, FCC class A
Connector: Pluggable 4P+8P push-in terminal (#24~16 AWG)
Enclosure: PC
Power Consumption: 2W @ 24VDC
Protocol: EtherCAT
Transmission Rate: 100Mbps
Distributed Clock: Default not supported
LED Indicator: PWR, RUN, Power Diagnosis LED
3.1.2.2 Power Input
Rated Voltage: 24VDC (±20%)
Dual Power Input: Supported
Max Current on Bus: 2A
Diagnosis Function:
–Over/under voltage for input 1&2
–Over current output on bus

APAX-5000 I/O Series User Manual 12
3.1.2.3 Digital Input
Channels: 4
Digital Input:
–Wet Contact:
Rated voltage: 24VDC
Logic level 1: 10~30 VDC and -10~-30VDC
Logic level 0: -3~3VDC
Input Delay:
–From logic 0 to 1: 4ms
–From logic 1 to 0: 4ms
Digital Filter: 3ms
3.1.2.4 Protection
Isolation Voltage: 2,000VDC
3.1.2.5 Environment
Operation Temperature: -10~60°C (vertical mounted)
Storage Temperature: -40~85°C
Relative Humidity: 5~95% (non-condense)
3.1.3 LED Indicator
Figure 3.3 WISE-5001 Module LED Indicator
(Figure WISE-5001 Module LED Indicator)
LED Color Indication Behavior
PWR Green ON Power on
Run Green ON EtherCAT connection
BUS Green ON BUS power on
OC RED ON BUS over current
OV1 RED ON Vin1 over voltage (30V)
OV2 RED ON Vin2 over voltage (30V)
UV1 RED ON Vin1 under voltage (10.7V)
UV2 RED ON Vin2 under voltage(10.7V)