ICP DAS USA ET-7219Z User manual

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
ET-7219Z
Ethernet I/O Module with 10-ch AI, 5-ch
DO
Quick Start Guide 
Congratulations!
This Quick Start will provide information needed to get started with ET-7219Z. Please
also consult the User Manual for detailed information on the setup and use of
ET-7219Z.
What’s In the Box?
In addition to this guide, the package includes the following items:
ET-7219Z Module Software Utility CD Quick Start
Technical Support
 ET-7219Z User Manual
CD:\NAPDOS\NAPDOS\ET7000_ET7200\Document\
 ET-7219Z Website
https://www.icpdas-usa.com/ET_7219Z.html
 ICP DAS Website
https://www.icpdas-usa.com

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
Init Mode: After booting, ET-7219Z will not run the
default firmware and cannot surf the internet. Use this mode to
update MiniOS7 image.
Normal Mode: After booting, ET-7219Z will run the default firmware and
can use all ET-7200 functions.
2
----------------------------------------------------------------------------------
Connecting to Network, PC and Power
The ET-7219Z is equipped with an RJ-45 Ethernet port for connection to an Ethernet
hub/switch and PC
1
---------------------------------------------------------
Configuring Boot Mode
PoE

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
---------------------------------------------------------------------------------
Installing the MiniOS7 Utility
Step 1：Get the MiniOS7 Utility tool
The MiniOS7 Utility can be obtained from companion CD or our FTP site:
CD:\Napdos\minios7\utility\minios7_utility\
http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/minios7_utility/
Step 2：Follow the prompts to complete the installation
After the installation has been completed,
there will be a new shortcut for MiniOS7 Utility
on the desktop.
4
----------------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The ET-7219Z are Ethernet devices, which comes with a default IP address, therefore,
you must first assign a new IP address to the ET-7219Z
Item Default
IP Address 192.168.255.1
Subnet Mask 255.255.0.0
Gateway 192.168.0.1

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
Step 1：Run the MiniOS7 Utility
Double-click the MiniOS7 Utility
shortcut on your desktop.
Step 2：Press“F12”or choose“Search”from the“Connection”menu
After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan
dialog will appear, that will display a list of all MiniOS7 modules on your network.
See the status tip, waiting
for the search to be done.

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
Step 3：Choose the module name and then choose“IP setting”from the toolbar
Step 4：Assign a new IP address and then choose “Set” button
Step 5：Choose “Yes” button
Press the Yes button in the Confirm dialog box
to exit the procedure.

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
Your browser must support Adobe Flash Player and have it enabled in order to use the
ET-7219Z web site.
If you do not have it installed, please go to the following website and install it.
The Adobe Flash Player Download Center：
http://get.adobe.com/flashplayer/
6
----------------------------------------------------------------------------------
Go to the ET-7219Z Web Site to Check out
Functions
The ET-7219Z contains an advanced web configuration system that provides users with
access ET-7219Z applications through a standard web browser.
Step 1 ： Start ET-7219Z
Make sure the switch placed in the “Normal”
position.
5
----------------------------------------------------------------------------------
Enabling Adobe Flash Player in Your Browser

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7
Then reboot ET-7219Z.
Step 2 ： Open a browser
Please use a standard internet browser to view the ET-7219Z webpage, such as Mozilla
Firefox or Internet Explorer…etc.
Step 3 ： Type the URL address of ET-7219Z
If you haven’t changed the default IP address of the ET-7219Z, please refer to “4. Using
MiniOS7 Utility to Assign a New IP” to configure it.
Step 4 ： Fill out the User name and Password
After entering the IP address, the login
dialog box will appear and prompt you to
enter your User name and Password.
The factory default User name and
Password are as follows:
Item Default
User name Admin
Password Admin

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
8
Step 5 ： Welcome to ET-7219Z web site
After logging into the
ET-7000/ET-7200 web site, the
welcome page will appear.
Step 6：Check out the data acquisition services
Under the Main Menu, expand the Web HMI, and then
select the Web HMI option to check the values of the
data acquisition.

ET-7219Z 10-ch AI, 5-ch DO DAQ module - QuickStart (Apr/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
9
----------------------------------------------------------------------------------
Reset to Factory Default Settings
Press the reset button for 5 seconds in order to reset the ET-7219Z to factory default
settings.
Item Default
IP Address 192.168.255.1
Subnet Mask 255.255.0.0
Gateway 192.168.0.1
Login Username Admin
Login Password Admin
Reset