Advantech WISE-4610 Series User manual

User Manual
WISE-4610 Series

WISE-4610 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2019
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2003461010 Edition 1
Printed in Taiwan June 2019

iii WISE-4610 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
研華股份有限公司
網站：www.advantech.com.tw
地址：台灣台北市內湖區瑞光路 26 巷 20 弄 1 號
電話：[phone]

WISE-4610 User Manual iv
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Package List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
WISE-4610
1 x WISE-4610 module
1 x Antenna
1 x Mounting bracket
1 x Quick startup manual
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.There is a danger of a new battery exploding if it is incorrectly
installed. Do not attempt to recharge, force open, or heat the battery.
Replace the battery only with the same or equivalent type recom-
mended by the manufacturer. Discard used batteries according to the
manufacturer's instructions.
Note! Notes provide optional additional information.
Note! I/O board to pair with WISE-4610 is available for ordering:
WISE-S614 4AI & 4DI
WISE-S672 6DI, 1RS-485 * 1RS-485/232
Note! Micro-B USB cable for configuring WISE-4610 nodes is available for
ordering:
1700023619-01 1M micro USB type-B male to USB type-A male
cable

v WISE-4610 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
6. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
8. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
11. Never pour any liquid into an opening. This may cause fire or electrical shock.
12. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
13. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the
user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
15. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
16. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
Note! M12 connector and cable for I/O or power wiring is available for order-
ing:
1654011516-01 M12 Connector 8P Male
1655005903-01 M12 Connector 4P Male
1700028162-01 2M M12 code-A 4-pin female cable for power wir-
ing
1700028163-01 2M M12 code-D 8-pin male cable for I/O wiring

WISE-4610 User Manual vi
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
NCC 警语
根據低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法
規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波
輻射性電機設備之干擾。
Federal Communication Commission Interference
Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US model only and is not available to all
US model. Per FCC regulation, all WiFi product marketed in US must fixed to US
operation channels only.

vii WISE-4610 User Manual
Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit
accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.

WISE-4610 User Manual viii

1 WISE-4610 User Manual
Chapter 1 Product Overview ................................1
1.1 Introduction ............................................................................................... 2
1.2 Feature Highlight....................................................................................... 2
Chapter 2 Product Overview ................................3
2.1 Series Family and Specifications .............................................................. 4
2.2 Interface Introduction ................................................................................ 4
Figure 2.1 WISE-4610 Interface Introduction .............................. 4
2.3 Battery Power Switch ................................................................................ 5
Figure 2.2 WISE-4610 Battery Switch ......................................... 5
2.4 LED Indication........................................................................................... 5
Figure 2.3 WISE-4610-S672 LED Indicator................................. 5
2.5 Membrane Button...................................................................................... 7
Figure 2.4 WISE-4610 Membrane Button.................................... 7
2.6 Package Information ................................................................................. 7
Chapter 3 Mechanical & Hardware Installation ..9
3.1 Modularization......................................................................................... 10
Figure 3.1 Install the I/O module with wireless module ............. 10
3.2 Dimension ............................................................................................... 11
Figure 3.2 WISE-4610 Dimension ............................................. 11
Figure 3.3 WISE-S600 IO Dimension ........................................ 12
3.3 DIN-Rail Mounting................................................................................... 12
Figure 3.4 WISE-4000 Series Mounting Kit Dimensions ........... 12
Figure 3.5 DIN-Rail Mounting Installation .................................. 13
Figure 3.6 DIN-Rail Mounting Front........................................... 13
Figure 3.7 DIN-Rail Mounting Back ........................................... 14
3.4 Wall Mounting ......................................................................................... 14
Figure 3.8 Wall Mounting Installation......................................... 14
3.5 Pole Mounting ......................................................................................... 15
Figure 3.9 Pole Mounting Front ................................................. 15
Figure 3.10Pole Mounting Back.................................................. 15
Chapter 4 Product Hardware Specification ......17
4.1 Wireless Interface ................................................................................... 18
4.2 GPS......................................................................................................... 19
4.3 General ................................................................................................... 19
4.4 Power ...................................................................................................... 20
4.5 I/O Specification ...................................................................................... 20
4.5.1 WISE-S614 I/O Module............................................................... 20
4.5.2 WISE-S672 I/O Module............................................................... 21
4.6 I/O Pin Assignment ................................................................................. 22
Figure 4.1 WISE-S600 Pin Out.................................................. 22
4.6.1 WISE-S614 I/O Application Wiring.............................................. 23
Figure 4.2 WISE-S614 Digital Input Wiring Diagram (port A).... 23
Figure 4.3 WISE-S614 Analog Input Wiring Diagram (port B)... 23
4.6.2 WISE-S672 Application Wiring ................................................... 23
Figure 4.4 WISE-S672 Digital Input Wiring Diagram (port A).... 23
Figure 4.5 WISE-S672 Serial Port Wiring Diagram (port B) ...... 24
4.7 Power Supply Wiring............................................................................... 24
4.8 Block Diagram......................................................................................... 24
Figure 4.6 WISE-4610 Block Diagram....................................... 24
4.9 Configuration Interface............................................................................ 25

WISE-4610 User Manual 2
Chapter 5 Product Firmware Specification ...... 27
Figure 5.1 Communication Architecture .................................... 28
5.1 Interface Design...................................................................................... 29
5.1.1 WISE-4610 LoRa Node Interface Design ................................... 29
5.1.2 Positioning .................................................................................. 32
5.1.3 LED Behaviors............................................................................ 33
5.1.4 Battery Charging......................................................................... 34
5.1.5 USB VCOM and RESTful ........................................................... 36
5.1.6 I/O Data Format of WISE-Link .................................................... 37
5.1.7 Membrane Button ....................................................................... 38
5.1.8 Module behavior with different power supply.............................. 39
5.1.9 LoRaWAN Function .................................................................... 40
Chapter 6 Product Software Specification....... 43
6.1 Connection Between Node and Gateway ............................................... 44
6.1.1 Set up WISE-3610 LoRa Gateway ............................................. 44
6.1.2 Configuring WISE-4610 LoRa Node by WISE Studio................. 48

Chapter 1
1Product Overview

WISE-4610 User Manual 2
1.1 Introduction
LPWAN is a type of wireless telecommunication wide area network designed to allow
long range communications at a low data rate among IoT applications, such as sen-
sors operated on a battery. Its benefits is to offer multi-year battery lifetime for sen-
sors/ applications to send small amounts of data over long distances a few times per
hour suitable for different environments. LoRa and LoRaWAN are one of category of
LPWAN which belong to the non-cellular LPWAN wireless communication network
protocols enables very long range transmissions with low power consumption, oper-
ating in the non-licensed spectrum.
The difference between LoRa and LoRaWAN is a patented wireless data communi-
cation of IOT technology and acquired by Semtech in 2012 which holds the IP for
LoRa transmission methodology. The LoRa modulation is the physical layer (PHY),
and LoRaWAN is a data link (MAC) protocol for a high capacity long range and low
power star network that the LoRa Alliance is standardizing for Low Power Wide Area
Networks (LPWAN).
1.2 Feature Highlight
WISE-4610 LoRa wireless I/O module supports either public LoRa or private LoRa by
simply configuring on WISE Studio through USB port. Moreover, WISE-4610 pro-
vides optional GPS and solar panel rechargeable battery with IP65 water and dust
poof enclosure for outdoor applications.
With smart modular design, WISE-4610 supports different I/O combinations for users'
selection. All user needs to do is to choose a suitable I/O module to be paired with
WISE-4610 wireless I/O module for flexible applications.

Chapter 2
2Product Overview

WISE-4610 User Manual 4
2.1 Series Family and Specifications
2.2 Interface Introduction
Figure 2.1 WISE-4610 Interface Introduction
Function Model Description
LoRa Wireless I/O
Module WISE-4610 Outdoor LoRa Wireless I/O Module
I/O Module WISE-S672 6 digital inputs, 1RS-485 port, and
1RS-232/485 port
WISE-S614 4 digital inputs and 4 analog inputs
LoRa Gateway WISE-3610 LoRa Network Gateway

5 WISE-4610 User Manual
Chapter 2 Product Overview
2.3 Battery Power Switch
Open the rubber cover on the side of WISE-4610 , there is a battery switch to turn on
or turn off the battery power supply.
Figure 2.2 WISE-4610 Battery Switch
2.4 LED Indication
Figure 2.3 WISE-4610-S672 LED Indicator

WISE-4610 User Manual 6
LED Color Indication Behavior
Status Green
Fast Blink
(0.2 sec ON, 0.3
sec OFF)
Wait for connecting or connecting
Slow Blink
(0.2 sec ON, 1.8
sec OFF)
Connecting and normal at work
Error Red
Fast Blink
(0.2 sec ON, 0.8
sec OFF)
Application errors.
Network registration timeout
I/O error
Slow Blink
(0.2 sec ON, 2.8
sec OFF)
Low battery voltage (v <= 20%)
Low RTC battery voltage
Off No error
RF RX Green On Receiving data from Gateway
Off NA
RF TX Yellow On Sending data to Gateway
Off NA
Signal
Strength 4 Green
On
(if Press Mem-
brane Button)
Main battery capacity
All OFF - V <= 20 %
1 ON - 20% < V < 40%
2 ON - 40% <= V < 60%
3 ON - 60% <= V < 80%
4 ON - V >= 80%
Note! If WISE-4610 is powered by battery, the LED will turn off after 15 sec-
onds for power saving purpose.

7 WISE-4610 User Manual
Chapter 2 Product Overview
2.5 Membrane Button
There is one membrane button designed for WISE-4610 LoRa Wireless I/O Module
on the name plate. This button used to set up different operation mode and display
LED indicators. (SEE 5.1.9 for membrane button behavior)
Figure 2.4 WISE-4610 Membrane Button
2.6 Package Information
WISE-4610 LoRa Wireless I/O Module
1 x WISE-4610
1 x Antenna
1 x Mounting Bracket
1 x Quick Startup Manual
WISE-S614 4AI/4DI I/O Module
1 x WISE-S614
1 x I/O Information Label
WISE-S672 6DI/1RS-485/1RS-485 or RS-232
1 x WISE-S672
1 x I/O Information Label
Note! Please see WISE-3610 user manual for detail configuration of LoRa
gateway.

WISE-4610 User Manual 8
Note! Please see WISE-6610 user manual for detail configuration of
LoRaWAN gateway.
Note! Micro-B USB cable for configuring WISE-4610 is available for ordering:
1700023619-01 1M micro USB type-B male to USB type-A male
cable
Note! M12 connector and cable for I/O or power wiring is available for order-
ing:
1654011516-01 M12 Connector 8P Male
1655005903-01 M12 Connector 4P Male
1700028162-01 2M M12 code-A 4-pin female cable for power
wiring
1700028163-01 2M M12 code-D 8-pin male cable for I/O wiring

Chapter 3
3Mechanical &
Hardware Installation

WISE-4610 User Manual 10
Like all WISE-4000 series modules, WISE-4610 series of wireless sensor nodes is
designed as compact units. Applicable installation methods are briefly described in
the following sections.
3.1 Modularization
The purpose of modularization is to better leverage the same wireless board with dif-
ferent I/O combination flexibly. The design is for the two modules installed with a
board to board connector, there are six screws to fix the enclosure after the two
boards are connected.
Figure 3.1 Install the I/O module with wireless module
Note! The screw torque is recommend to be 2.5~3.0 kgf/cm2