Advantech ASMB-587 User manual

User Manual
ASMB-587
LGA 1200 Intel® Xeon® W & 10th
Gen. Core™ MicroATX Server
Board with 4 x DDR4, 3 x PCIe, 6 x
USB 3.2, 5 x SATA3, Quad/Dual
LANs, and IPMI

ASMB-587 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2021
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Xeon, Core i and Pentium® are trademarks of Intel® Corporation.
All other product names or trademarks are properties of their respective owners.
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known. Your satisfaction is our primary concern. Here is a guide to Advantech’s cus-
tomer services. To ensure you get the full benefit of our services, please follow the
instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
Part No. 2002058700 Edition 1
Printed in Taiwan July 2021

iii ASMB-587 User Manual
Declaration of Conformity
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Ordering Information
Part Number Chipset Memory LAN Display IPMI
ASMB-587G4-00A1 W480E DDR4 288-pin ECC/Non-
ECC unbuffered DIMM 4 DVI, HDMI, VGA Optional
ASMB-587G2-00A1 W480E DDR4 288-pin ECC/Non-
ECC unbuffered DIMM 2 DVI, HDMI, VGA Optional

ASMB-587 User Manual iv
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Initial Inspection
Before you begin installing your motherboard, please make sure that the following
materials have been shipped:
1 Startup manual
2 Serial ATA HDD data cables
2 Serial ATA HDD power cables
1 COM cable for I/O port bracket
1 I/O port bracket
1 Warranty card
1 JFP1 cable
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately. We have carefully inspected the ASMB-587 mechanically and
electrically before shipment. It should be free of marks and scratches and in perfect
working order upon receipt. As you unpack the ASMB-587, check it for signs of ship-
ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or your local sales
representative immediately. Also notify the carrier. Retain the shipping carton and
packing material for inspection by the carrier. After inspection, we will make arrange-
ments to repair or replace the unit.

v ASMB-587 User Manual
Contents
Chapter 1 Hardware Configuration......................1
1.1 Introduction ............................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Specifications............................................................................................ 3
1.3.1 CPU .............................................................................................. 3
1.3.2 PCH .............................................................................................. 3
1.3.3 Memory ......................................................................................... 3
1.3.4 Input/Output .................................................................................. 3
1.3.5 Graphics........................................................................................ 4
1.3.6 Ethernet LAN ................................................................................ 4
1.3.7 Industrial Features ........................................................................ 4
1.3.8 Mechanical and Environmental Specifications.............................. 4
1.4 Jumpers and Connectors .......................................................................... 5
Table 1.1: Jumper list .................................................................. 5
Table 1.2: Connector list.............................................................. 6
1.5 Board Layout: Jumper and Connector Locations...................................... 7
Figure 1.1 Jumper and Connector Locations............................... 7
Figure 1.2 I/O connectors ............................................................ 7
1.5.1 Onboard LAN LED Definition ........................................................ 8
Table 1.3: Onboard LAN LED Definition (LAN1 ~ LAN4) ............ 8
1.5.2 Onboard LED (LED2, LED3, LED4).............................................. 8
Table 1.4: Onboard LED (LED2, LED3, LED4) ........................... 8
1.6 ASMB-587 Block Diagram ........................................................................ 9
Figure 1.3 ASMB-587 Block Diagram.......................................... 9
1.7 Safety Precautions.................................................................................. 10
1.8 Jumper Settings ...................................................................................... 11
1.8.1 How to Set Jumpers.................................................................... 11
Table 1.5: CMOS clear (JCMOS1) ............................................ 11
Table 1.6: ME update (JME1).................................................... 11
Table 1.7: PCIEX16_Slot6 link switch (JPEG2, JPEG1) ........... 12
Table 1.8: PCIe SMBus Connection Setting (JPSMB1, JPSMB2)
12
Table 1.9: USB power switch (JUSB1/JUSB2).......................... 13
Table 1.10:Watchdog timer output (JWDT1) .............................. 13
Table 1.11:ATX/AT mode selector (PSON1).............................. 14
1.9 System Memory ...................................................................................... 14
Chapter 2 Connecting Peripherals ....................15
2.1 Introduction ............................................................................................. 16
2.2 USB Ports (LAN1_USB1_2, LAN2_USB3_4, USB5~13)........................ 16
2.3 USB Power Switch (JUSB1/JUSB2) ....................................................... 17
2.4 Display Connector (HDMI1_VGA1, DVI1)............................................... 18
2.5 Serial Ports (COM1~2)............................................................................ 19
2.6 External Keyboard & Mouse (KBMS1).................................................... 20
2.7 CPU Fan Connector (CPUFAN0)............................................................ 21
2.8 System FAN Connector (SYSFAN0 ~ SYSFAN3) .................................. 22
2.9 Front Panel Connectors (JFP1) .............................................................. 23
2.9.1 ATX Soft Power Switch (Pins 1, 3) ............................................. 24
2.9.2 Reset Connector (Pins 2, 4)........................................................ 24
2.9.3 Front Panel LAN Indicator Connector (Pins 5, 6, 7, 8)................ 24
2.9.4 HDD LED Connector (Pins 13, 15) ............................................. 24
2.9.5 Power LED (Pins 14, 16) ............................................................ 24
2.10 Case Open Connector (JCASE1) ........................................................... 25

ASMB-587 User Manual vi
2.11 Serial ATA Interface (SATA0~4)............................................................. 26
2.12 PCIe x16 Expansion Slot (PCIEX16_SLOT6)......................................... 27
2.13 PCIe x4 Expansion Slot (PCIEX4_SLOT4/7).......................................... 28
2.14 Auxiliary Power Connector (ATX12V1)................................................... 29
2.15 SPI Flash Connector (SPI_CN1) ............................................................ 30
2.16 Low Pin Count Connector (LPC1~2)....................................................... 31
2.17 PMBUS Connector (PMBUS1) ............................................................... 32
2.18 LAN Ports (LAN1_USB1_2, LAN2_USB3_4, LAN3_LAN4) ................... 33
2.19 M.2 Socket (M2_2280_1)........................................................................ 34
Chapter 3 BIOS Operation ................................. 35
3.1 Introduction ............................................................................................. 36
Figure 3.1 Main setup screen ................................................... 36
3.2 Entering BIOS Setup............................................................................... 37
3.2.1 Main Menu .................................................................................. 37
Figure 3.2 Main setup screen .................................................... 37
3.2.2 System Time/System Date ......................................................... 37
3.3 Advanced BIOS Features Setup............................................................. 38
Figure 3.3 Advanced BIOS features setup screen .................... 38
3.3.1 Platform Misc Configuration........................................................ 39
Figure 3.4 Platform misc configuration screen .......................... 39
3.3.2 CPU Configuration...................................................................... 40
Figure 3.5 CPU configuration screen ........................................ 40
3.3.3 Power & Performance................................................................. 44
Figure 3.6 CPU - power management control screen ............... 44
3.3.4 PCH-FW Configuration ............................................................... 46
Figure 3.7 PCH-FW configuration screen.................................. 46
3.3.5 Trusted Computing ..................................................................... 54
Figure 3.8 TPM settings screen................................................. 54
3.3.6 ACPI Settings ............................................................................. 55
Figure 3.9 ACPI settings screen............................................... 55
3.3.7 SMART Settings ......................................................................... 56
Figure 3.10SMART settings screen............................................ 56
3.3.8 Super IO Configuration ............................................................... 57
Figure 3.11Super IO configuration screen.................................. 57
3.3.9 NCT6776 HW Monitor ................................................................ 60
Figure 3.12PC health status screen ........................................... 60
3.3.10 S5 RTC Wake Settings............................................................... 62
3.3.11 Serial Port Console Redirection.................................................. 63
Figure 3.13Serial port console redirection screen ...................... 63
3.3.12 Intel TXT Information .................................................................. 66
Figure 3.14Intel TXT information screen .................................... 66
3.3.13 PCA-COM232/COM485 Super IO Configuration........................ 67
Figure 3.15Optional PCA-COM configuration screen................. 67
3.3.14 USB Configuration...................................................................... 69
Figure 3.16USB configuration screen......................................... 69
3.3.15 Network Stack Configuration ...................................................... 72
Figure 3.17UEFI network stack configuration screen................. 72
3.3.16 CSM Configuration ..................................................................... 74
Figure 3.18CSM configuration screen ........................................ 74
3.3.17 NVMe Configuration .................................................................. 80
3.3.18 iSCSI Configuration .................................................................... 81
3.4 Chipset.................................................................................................... 82
Figure 3.19Chipset screen ......................................................... 82
3.4.1 System Agent (SA) Configuration............................................... 83
Figure 3.20System agent (SA) configuration screen.................. 83
3.4.2 PCH-IO Configuration................................................................. 88
Figure 3.21PCH-IO configuration screen ................................... 88

vii ASMB-587 User Manual
Figure 3.22PCI Express configuration screen ............................ 90
Figure 3.23SATA and RST configuration screen........................ 92
Figure 3.24USB configuration screen......................................... 93
Figure 3.25Security configuration screen ................................... 94
Figure 3.26HD Audio configuration screen................................. 95
3.5 Security ................................................................................................... 96
Figure 3.27Security screen......................................................... 96
3.6 Boot......................................................................................................... 97
Figure 3.28Boot screen .............................................................. 97
3.7 Save & Exit.............................................................................................. 98
Figure 3.29Save & Exit screen ................................................... 98
3.8 Server Mgmt............................................................................................ 99
Figure 3.30Server Mgmt screen ................................................. 99
3.8.1 System Event Log..................................................................... 102
3.8.2 BMC Self Test Log.................................................................... 104
3.8.3 BMC Network Configuration ..................................................... 105
Chapter 4 Driver Installation ............................107
4.1 Before You Begin.................................................................................. 108
4.2 Introduction ........................................................................................... 108
4.2.1 Chipset...................................................................................... 108
4.2.2 Graphics.................................................................................... 108
4.2.3 LAN ........................................................................................... 109
4.2.4 HD Audio................................................................................... 109
4.2.5 Intel ME..................................................................................... 109
4.2.6 SATA RAID ............................................................................... 110
Appendix A Programming the Watchdog Timer111
A.1 Watchdog Timer Overview.................................................................... 112
A.2 Programming the Watchdog Timer ....................................................... 112
Table A.1: Watchdog timer registers........................................ 114
A.2.1 Example Programs ................................................................... 114
Appendix B I/O Pin Assignments........................119
B.1 USB 2.0 Header (USB7~12) ................................................................. 120
Table B.1: USB2.0 Header (USB7~12) ................................... 120
B.2 USB 3.2 Header (USB5_6) ................................................................... 120
Table B.2: USB 3.1 Header (USB5_6)..................................... 120
B.3 VGA Connector (VGA1)........................................................................ 121
Table B.3: VGA Connector (VGA1) ......................................... 121
B.4 RS-232 Interface (COM1~2) ................................................................. 121
Table B.4: RS-232 Interface (COM1~2)................................... 121
B.5 External Keyboard and Mouse Connector (KBMS1)............................. 122
Table B.5: External Keyboard and Mouse Connector (KBMS1) ....
122
B.6 System Fan Power Connector (SYSFAN0~3) ...................................... 122
Table B.6: Fan Power Connector (SYSFAN0~3)..................... 122
B.7 ATX Soft Power Switch (JFP1) ............................................................. 123
Table B.7: ATX Soft Power Switch (JFP1)............................... 123
B.8 Reset Connector (JFP1) ....................................................................... 123
Table B.8: Reset Connector (JFP1)......................................... 123
B.9 Front Panel LAN LED Connector (JFP1) .............................................. 124
Table B.9: Front Panel LAN LED Connector (JFP1)................ 124
B.10 HDD LED Connector (JFP1) ................................................................. 124
Table B.10:SNMP SMBus Connector (JFP2) ........................... 124

ASMB-587 User Manual viii
B.11 Power LED (JFP1) ................................................................................ 125
Table B.11:Power LED (JFP1) ................................................. 125
B.12 Front Panel Audio Connector (FPAUD1) .............................................. 125
Table B.12:Front Panel Audio Connector (FPAUD1) ............... 125
B.13 Case Open Connector (JCASE1) ......................................................... 125
Table B.13:Case Open Connector (JCASE1)........................... 125
B.14 SPI Flash Card Pin Connector (SPI_CN1) ........................................... 126
Table B.14:SPI Flash Connector (SPI_CN1)............................ 126
B.15 GPIO Connector (GPIO1) ..................................................................... 126
Table B.15:GPIO Connector (GPIO1) ...................................... 126
B.16 SMBUS Connector (SMBUS1) ............................................................. 126
Table B.16:SMBUS Connector (SMBUS1)............................... 126
B.17 PMBUS Connector (PMBUS1) ............................................................. 127
Table B.17:PMBUS Connector (PMBUS1)............................... 127
B.18 System I/O Ports................................................................................... 127
Table B.18:System I/O Ports .................................................... 127
B.19 Interrupt Assignments ........................................................................... 128
Table B.19:Interrupt Assignments ............................................ 128
B.20 1st MB Memory Map............................................................................. 128
Table B.20:1st MB Memory Map .............................................. 128

Chapter 1
1Hardware
Configuration

ASMB-587 User Manual 2
1.1 Introduction
ASMB-587 motherboard is designed with the most advanced Intel® W480E PCH for
industrial server grade applications that require high-performance. The motherboard
supports Intel® Xeon® W and 10th Gen. Core™ i9/i7/i5/i3 processor with DDR4 288-
pin 2933/2666/2400 MHz ECC/Non-ECC memory for up to 128 GB. ASMB-587 also
provides cost-effective Intel HD graphics integrated on processor, and the graphics
VRAM is 1 GB maximum shared memory with 2 GB and above system memory
installed. There is one PCIe x16 slot (Gen3 x16 link), and two PCIe x4 slots (Gen3 x4
link), to fulfill multi-PCIe demands from video surveillance and factory automation
markets. In addition, ASMB-587 also comes with four Gigabit Ethernet LAN (G4 ver-
sion) via dedicated PCIe bus, which offers bandwidth up to 500 MB/s eliminating net-
work bottlenecks.
By using the Intel® W480E chipset, the ASMB-587 offers a variety of features such
as five onboard SATA III interfaces (bandwidth = 600 MB/s) with software RAID, six
USB 3.2 and seven USB 2.0 ports, and one M.2(PCIe / SATA). These powerful I/O
capabilities ensure even more reliable data storage capabilities and high-speed I/O
peripheral connectivity.
The ASMB-587 also adopts Advantech’s unique, patented Sleep Mode Control
Circuit for AT Power Mode. With all these excellent features and outstanding perfor-
mance, ASMB-587 is the ideal platform for today’s industrial applications.
1.2 Features
Triple Display: One VGA, DVI-D, and HDMI port can be used to implement tri-
ple display outputs.
PCIe architecture: One PCIe x16 slot (x16 link), two x4 slots from Intel W480E
PCH.
High Performance I/O capability: Quad or dual Gigabit LAN via PCIe bus, six
USB 3.2 (four Gen2 + two Gen1) and seven USB 2.0 including one Type A 2.0
ports, five SATA III connectors.
Standard Micro-ATX form factor with industrial features: ASMB-587 pro-
vides industrial features like longevity, wide temperature range operation,
watchdog timer functions, and more.
Automatic power on after power failure: It is often necessary to have an unat-
tended system come back into operation when power resumes after a power
failure. Advantech’s industrial server board allows users to set the system to
power on automatically without hitting power button. Please refer to the detailed
“AT” mode settings by jumper in Section 1.8.1.7.
Active Management Technology: is hardware and firmware technology for
remote monitoring and management of networked computers. Intel AMT (iAMT)
stores hardware and software information in non-volatile memory. Built-in man-
agement provides out-of-band management capabilities, allowing remote dis-
covery and KVM to repair systems after OS failures or when a system has
crashed. Alert and event logging features detect problems and quickly reduce
downtimes, pro-actively blocking incoming threats, containing infected clients
before they impact the network, and pro-actively notifying the user when critical
software agents are removed. To enable iAMT, please refer to AMT configura-
tion in BIOS.

3 ASMB-587 User Manual
Chapter 1 Hardware Configuration
1.3 Specifications
1.3.1 CPU
Supports Xeon® W and 10th Gen. Core™ i9/i7/i5/i3 CPU in an LGA1200 socket.
Max. TDP support up to 125 W.
1.3.2 PCH
System Chipset: Intel® W480E.
SATA hard disk drive interface: Five on-board SATA III connectors support
Advanced Host Controller Interface (AHCI) technology, and Intel Rapid Storage
Technology (RST) supports software RAID 1, 0, 10 and 5 with data transmission
rates up to 600 MB/s.
1.3.3 Memory
RAM: Up to 128 GB in four 288-pin DIMM sockets. Supports dual-channel
DDR4 ECC/Non-ECC 2933/2666/2400 unbuffered DIMM.
1.3.4 Input/Output
PCIe slot: One PCIe x16 expansion slot (Gen3 x16 link) and two PCIe x4
expansion slots (Gen3 x4 link).
M.2 connector: One M.2 connector (SATA/PCIe x4 compatible) provides 6 Gb/
s and 8 Gb/s bandwidth.
Serial port: Two serial ports onboard headers (one can be used for rear I/O port
bracket via COM cable connection), only supports RS-232.
PS/2 Keyboard and mouse connector: To save rear I/O space, ASMB-587
reserves a 6-pin header on board (KBMS1), and via a cable kit to build two 6-pin
mini-DIN connectors for easy connection to a PS/2 keyboard and mouse.
USB port: Supports up to six USB 3.2 ports, four Gen2 ports in rear IO with
transmission up to 10Gbps and seven USB 2.0 ports onboard with transmission
rates up to 480 Mbps.
LPC: One LPC connector supports Advantech TPM LPC modules and COM
232/422/485 modules.
GPIO: ASMB-587 supports 8-bit GPIO from super I/O for general purpose con-
trol applications.
Note! For Microsoft Windows OS, only Windows 10 (64-bit), Windows Server
2019 (64-bit) are supported on this platform.
Note! 1. Due to the inherent limitations of the PC architecture, the system may
not fully detect 128 GB RAM when 128 GB RAM is installed.
2. A 32-bit OS may not fully detect 4 GB of RAM when 4 GB is installed.
Note! ASMB-587 has an onboard KBMS1 connector for external keyboard/
mouse usage. Please purchase an optional PS/2 keyboard/mouse cable
(P/N:1700019268-11) and its bracket (P/N:1960063434N000) to be
installed on the chassis rear slot.

ASMB-587 User Manual 4
1.3.5 Graphics
Graphics processor: Integrated Intel HD Graphics.
Display memory: 1 GB maximum shared memory with 2 GB and above system
memory installed. (BIOS default is 256MB.)
DVI-D: Up to 1920 x 1200 resolution @ 60 Hz refresh rate.
D-Sub: Up to 1920 x 1200 resolution @ 60 Hz refresh rate.
HDMI: Supports HDMI 2.0 up to 4096 x 2160 resolution @ 60 Hz refresh rate.
1.3.6 Ethernet LAN
Interface: Supports four 10/100/1000 Mbps Ethernet port (s) via PCIe bus
which provides up to 500 MB/s data transmission rates.
Controller: LAN1: Intel I219-LM; LAN2 ~ 4: Intel I210-AT (LAN2 is BMC shared
NIC when the optional IPMI-2000-00A1 module is installed; LAN3/4 is for G4
SKU only.)
1.3.7 Industrial Features
Watchdog timer: can generate a system reset or NC (Not Connected). The
watchdog timer is programmable, with each unit equal to one second or minute
(255 levels).
IPMI: Supports IPMI 2.0 via optional IPMI-2000 module (P/N: IPMI-2000-00A1).
1.3.8 Mechanical and Environmental Specifications
Operating temperature: 0 ~ 60° C (32 ~ 140° F, depending on CPU)
Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
Humidity: 5 ~ 95% non-condensing
Power supply voltage: +3.3 V, +5 V, ±12 V, 5 VSB
Power consumption:
Max. load: +3.3 V @ 0.75 A, +5 V @ 1.43 A, +12 V @ 0.66 A, +12 V (8P) @
7.08 A, +5 VSB @ 0.13 A
Board size: 244 x 244 mm (9.6" x 9.6")
Board weight: 0.5 kg (1.123 lb)

5 ASMB-587 User Manual
Chapter 1 Hardware Configuration
1.4 Jumpers and Connectors
Connectors on the ASMB-587 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below lists the functions of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label Function
HDMI_I2C1 For RD debugging
JCMOS1 CMOS clear
JME1 Intel ME disable jumper for ME/BIOS update
JPEG1, JPEG2 PCIEX16_SLOT6 PCIe link switch between x16 or x8x8 or x8x4x4
(for riser card)
JPEG3 Default (1-2)/reserve for debug (2-3)
JPSMB1, JPSMB2 PCIE SLOT SMBUS connector: to PCH (1-2)/to BMC (2-3)
JTHR_SEL1 To select on board or external thermistor
JSMB1 For RD debugging
JUSB1 Rear window USB 3.2 Gen2 port power source switch between
+5 VSB and +5 V
JUSB2 On board USB2.0/3.2 Gen1 port power source switch between
+5 VSB and +5 V
JWDT1 Watchdog reset
PSON1 AT(1-2)/ATX(2-3)

ASMB-587 User Manual 6
Table 1.2: Connector list
Label Function
ATXPWR1 ATX 24-pin main power connector (for system)
ATX12V1 8-pin power connector (for CPU)
AUDIO1~2 Audio connector
BAT1 For RTC battery
BAT2 For optional battery kit
BIOS_SKT1 BIOS SPI ROM
BMC2 BMC connector to support IPMI-2000 module
(P/N: IPMI-2000-00A1)
COM1, COM2 Serial port: RS-232
CPUFAN0 CPU FAN connector
DIMMA0, DIMMA1,
DIMMB0, DIMMB1 DDR4 288-pin slot
DVI1 DVI-D connector
EX_THR1 For external thermistor cable kit
FPAUD1 Front Panel Audio Header
GPIO1 8-bit GPIO header
HDMI1_VGA1 HDMI + VGA connector
JCASE1 Case open
JFP1 Power Switch/ Power Reset/ LANLED1/ LANLED2/ HDD LED/
Power LED connector
KBMS1 External keyboard and mouse connector (6-pin)
LAN1_USB1_2,
LAN2_USB3_4
LAN1/USB 3.2 Gen2 port 1, 2 stack connector
LAN2/USB 3.2 Gen2 port 3, 4 stack connector
LAN3_4 LAN3 & LAN4 connector
LPC1, LPC2 Low pin count connector for Advantech TPM and RS-232/422/485
modules
M2_2280_1 M.2 22110/2280 (PCIe/SATA)
PCIEX4_SLOT4 PCIe x4 slot (Gen3 x4 link)
PCIEX16_SLOT6 PCIe x16 slot (Gen3 x16 link)
PCIEX4_SLOT7 PCIe x4 slot (Gen3 x4 link)
PMBUS1 PMBUS connector to communicate with power supply
SATA0~4 SATA III (6Gb/s)
SMBUS1 SM Bus from PCH
SPDIF_OUT1 SPDIF audio output pin header
SPI_CN1 SPI flash card pin header (for RMA)
SYS_LED1 System information LED connector
SYSFAN0, SYSFAN1,
SYSFAN2, SYSFAN3 System FAN connector
USB5_6 USB 3.2 Gen1 port (Header)
USB7_8, USB9_10,
USB11_12 USB 2.0 port (Header)
USB13 USB 2.0 port (USB Type A)

7 ASMB-587 User Manual
Chapter 1 Hardware Configuration
1.5 Board Layout: Jumper and Connector
Locations
Figure 1.1 Jumper and Connector Locations
Figure 1.2 I/O connectors

ASMB-587 User Manual 8
1.5.1 Onboard LAN LED Definition
1.5.2 Onboard LED (LED2, LED3, LED4)
The ASMB-587 has onboard power LED for 5V Power, 5V Standby and 3.3V AUX.
Table 1.3: Onboard LAN LED Definition (LAN1 ~ LAN4)
10/100/1000 Mbps LAN Link/Activity LED Scheme
Left LED Right LED
10 Mbps Link
Active
Off
Off
Green
Blinking green
100 Mbps Link
Active
Amber
Amber
Green
Blinking green
1000 Mbps Link
Active
Green
Green
Green
Blinking green
No Link Off Off
Table 1.4: Onboard LED (LED2, LED3, LED4)
LED Description
LED Definition
OFF ON (Green)
5V_LED2 Power on LED Power off System is On
5VSB_LED3 Standby LED No input AC Power
System is ON,
in sleep mode, or
in soft-off mode
3V3DSW_LED4 Deep sleep
well LED
No input AC power,
deep sleep mode enabled
System is ON,
in sleep mode,
in soft-off mode, or
deep sleep mode disable

9 ASMB-587 User Manual
Chapter 1 Hardware Configuration
1.6 ASMB-587 Block Diagram
Figure 1.3 ASMB-587 Block Diagram

ASMB-587 User Manual 10
1.7 Safety Precautions
Warning! Always completely disconnect the power cord from your chassis when-
ever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sud-
den power surges. Only experienced electronics personnel should open
the PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to static
electric discharges. As a safety precaution, use a grounding wrist strap
at all times. Place all electronic components on a static-dissipative sur-
face or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer’s instructions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.

11 ASMB-587 User Manual
Chapter 1 Hardware Configuration
1.8 Jumper Settings
This section provides instructions on how to configure your motherboard by setting
the jumpers. It also includes the motherboard default settings and your options for
each jumper.
1.8.1 How to Set Jumpers
You can configure your motherboard to match the needs of your application by set-
ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists
of two metal pins and a small metal clip (often protected by a plastic cover) that slides
over the pins to connect them. To “close” (or turn on) a jumper, you connect the pins
with the clip. To “open” (or turn off) a jumper, you remove the clip. Sometimes a
jumper consists of a set of three pins, labeled 1, 2, and 3. In this case you connect
either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set-
ting jumpers.
1.8.1.1 CMOS Clear (JCMOS1)
The ASMB-587 motherboard contains a jumper that can erase CMOS data and reset
the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set JCMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
1.8.1.2 ME Update (JME1)
The ASMB-587 contains a jumper that can update the ME firmware. Normally this
jumper should be set with pin 1-2 closed. If you want to update the ME firmware, set
JME1 to 2-3 closed to disable ME for the new firmware update.
Table 1.5: CMOS clear (JCMOS1)
Function Jumper Setting
* Keep CMOS data
Clear CMOS data
* Default setting
1-2 closed
123
2-3 closed
123
Table 1.6: ME update (JME1)
Function Jumper Setting
*Lock ME update
ME update
* Default setting
1-2 closed
123
2-3 closed
123

ASMB-587 User Manual 12
1.8.1.3 PCIe Link Switch (JPEG1, JPEG2)
The ASMB-587 contains a jumper that can switch one PCIe x16 link on PCIEX-
16_SLOT6 to two PCIe x8 link or one PCIe x8 + two PCIe x4 link. Default setting with
pin 1-2 closed is one x16 on PCIEX16_SLOT6. For jumper settings for riser card sup-
port please refer to Section 2.14 PCIe x16 Expansion Slot.
1.8.1.4 PCIe SMBus Connection Setting (JPSMB1, JPSMB2)
Please use configuration of (2-3: PCIe to BMC) on both JPSMB1&2 if there was
RAID card and memory conflict issue.
Table 1.7: PCIEX16_Slot6 link switch (JPEG2, JPEG1)
Function JPEG2 JPEG1
Slot6 PCIe x16*
Slot6 PCIe x8/x8
Slot6 PCIe x8/x4/x4
* Default setting
123
123
1-2 closed
1-2 closed
2-3 closed 1-2 closed
123
123
123
123
2-3 closed 2-3 closed
Table 1.8: PCIe SMBus Connection Setting (JPSMB1, JPSMB2)
Function Jumper Setting
*PCIe to PCH
PCIe to BMC
* Default setting
1-2 closed
123
2-3 closed
123